|
| 1 | All below item provided by contractor (Basic Rate with Frieght & Insurance Charges to be Quoted by bidder) |
| 2 | Description |
| 3 | Holding clamp for ST Pole-Cross arm |
| 4 | Holding clamp for ST/PCC Pole-Guarding Angle |
| 5 | Armour rod with ferule |
| 6 | Stone Pad 300x300x75 mm |
| 7 | Earth wire clamp with Bolts & Nuts |
| 8 | P.G. Clamps for panther |
| 9 | Number Plates with clamp, nuts & bolts |
| 10 | Danger Board with clamp for 33 KV |
| 11 | GI Barbed wire (2kg./pole) |
| 12 | Aluminium binding wire- 6 swg (0.5 kg./pole) |
| 13 | Aluminium Paint |
| 14 | Red Oxide Paint |
| 15 | Bolts, Nuts & Washer all sizes |
| 16 | E-bracket |
| 17 | F-bracket/Top Cleat in MS channel |
| 18 | Eye Bolt |
| 19 | Aluminium Lug of suitable size |
| 20 | HDPE pipe 150 mm dia |
| 21 | GI Pipe 6\\" dia |
| 22 | M.S. Angle Iron 65x65x6mm, 4300 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m) |
| 23 | M.S. Angle Iron 65x65x6, 3200mm long, 5.8 Kg/Mtr. for cable with clamp |
| 24 | Top channel 125X65mm, 3200 mm long (13.10 Kg./m) with clamp |
| 25 | Guarding Angle 75x75x6mm (3500/2200 mm long) |
| 26 | Erection, Installation and Commissioning of following items to be done by contractor As per RESPO drawing & Norms |
| 27 | Holding clamp for ST Pole-Cross arm |
| 28 | Holding clamp for ST/PCC Pole-Guarding Angle |
| 29 | Armour rod with ferule |
| 30 | Stone Pad 300x300x75 mm |
| 31 | Earth wire clamp with Bolts & Nuts |
| 32 | P.G. Clamps for panther |
| 33 | Number Plates with clamp, nuts & bolts |
| 34 | Danger Board with clamp for 33 KV |
| 35 | GI Barbed wire (2kg./pole) |
| 36 | Aluminium binding wire- 6 swg (0.5 kg./pole) |
| 37 | Aluminium Paint |
| 38 | Red Oxide Paint |
| 39 | Bolts, Nuts & Washer all sizes |
| 40 | E-bracket |
| 41 | F-bracket/Top Cleat in MS channel |
| 42 | Eye Bolt |
| 43 | Aluminium Lug of suitable size |
| 44 | GI Pipe 6\\" dia |
| 45 | M.S. Angle Iron 65x65x6mm, 4300 mm long 2/6/8 no. Bracing, with 4/12/16 clamps (5.8 kg./m) |
| 46 | M.S. Angle Iron 65x65x6, 3200mm long, 5.8 Kg/Mtr. for cable with clamp |
| 47 | Top channel 125X65mm, 3200 mm long (13.10 Kg./m) with clamp |
| 48 | Guarding Angle 75x75x6mm (3500/2200 mm long) |
| 49 | Safe carriage, Shifting up JE dump store / side from any ESC Center of Jhansi Zone and Erection, Commissioning and installation of following items done by contractor As per RESPO drawing & Norms |
| 50 | ST Pole 11 Mt Long-SP-55 |
| 51 | ST Pole 16 Mt Long-SP-78 |
| 52 | V-type cross arm 100x50x6 mm |
| 53 | 33 KV Disc Insulator B&S. Type 70 KN. |
| 54 | Disc Fittings Panther 70 KN. |
| 55 | 33KV Pin Insulator |
| 56 | 33KV Pin with Nut |
| 57 | GI wire 6 SWG for guarding along the line |
| 58 | GI wire 8 SWG for guarding a cross the line |
| 59 | Earthing complete with GI Wire 8SWG |
| 60 | Single core PVC Cable 1x240 Sq.mm. |
| 61 | Complete Stay (GI Stay rod 20x1800 mm, Stay 7/8 SWG 10 Kg.) |
| 62 | 33 KV XLPE Cable 3x300 sq.mm. |
| 63 | 33 KV XLPE 3X300 sq.mmm C/J/Kit (Outdoor) |
| 64 | ACSR Panther Conductor |
| 65 | 33KV RMU 3 Way |
| 66 | Concreting, grouting & muffing of support (STP/PCC pole 0.268 cu.mtr/pole) with material |
| 67 | Laying and Dressing of 3x300 sqmm XLPE cable by digging method the cable shall with duly protected by brick, sand and stone slab & refiling, raiming of the left oil soil as per drawing. |
| 68 | Laying of 33 KV XLPE cable 3x300 sqmm in HDPE Pipe underground minimum 1.5 meters below by HDD Method |
| 69 | Tree cutting compensation |
| 70 | Making of cable J/kit |
| 71 | Panel room for 33KV RMU (12x12x10Ft) with all complete respect in MS Shade |
| 72 | Concreting and Grouting of Stay set (0.108 Cu.m./Stay)) Please Enable Macros to View BoQ information |
