Tender For Electrification Work For The Divider Installed Between Delhi Road From Gagan River Bridge To New Moradabad Zero Point And Installation Of Additional Decorative Column Lights On Both Side Pathways., Moradabad-Uttar Pradesh
TDR : 54900577
Tender Notice
BOQ
Expired
Moradabad
Uttar Pradesh
Tender For Electrification Work For The Divider Installed Between Delhi Road From Gagan River Bridge To New Moradabad Zero Point And Installation Of Additional Decorative Column Lights On Both Side Pathways.
Name of Work:- गागन नदी पुल से नया मुरादाबाद जीरो प्वाइंट तक दिल्ली रोड़ के मध्य स्थापित डिवाइडर एवं दोनों साईड पाथवे पर अतिरिक्त डेकोरेटिव काॅलम लाईट लगाये जाने हेतु विद्युतीकरण का कार्य।
Sl. No.
Item Description
1
Supply & Fixing of 3mtr Decorative pole made of steel structure duly polyurethane paint coated with CNC cutting customisable Square desings. Dia 300X300mm, Base Plate-450X450X10mm, with MFMD-130, 100W-150W, CCT-3000K/4000k/5700K, CRI>70,SPD-10KV,PF>0.9, Operating voltage-140V-270V complete in all respect as per direction of Engineer-in-Charge (PSR)
2
S/L of aluminum conductor PVC insulated armored served sheathed cable 1100 volts grade devider on top surface etc. comp. ((PWD SOR Item NO 501/2018)16 Sq.mm. 501(i)/2018
3
120 Sq.mm. 501(o)/2018
4
S/F of palm or pin type copper tin planted cable socket (lug) to the cable leads etc. comp. (504/2018)16 Sq.mm. 504(d)/2018
5
120 Sq.mm. 504(J)/2018
6
S/E of Double walled corrugated HDPE pipe size 90/63 mm at a depth of 1,20 mtr. Below ground level complete excavation and back filling (Rate includes manual trunch less if required) complete work as per direction of E/I.
7
Supply and fixing of BISHOP Column light made of mild steel with fine laser cut design closed by diffuser and have ingress protection for optical compartment. Fitting height 3mtr above ground level with mid light illumination of 40W. The column section shall be of 300mmx300mm with top part predesigned with street light of 50W for illuminating the side areas. Mid-section gives the homogeneous light output. All pole section Shall be welded by certified welders using high MIG welding process. The Service door shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole is design with elongated foundation holes for fine alignment of the pole during installation. Fitting is made of mild steel with fine laser cut design and signage closed by PMMA diffuser tailored with lighting to suit your specific needs as per detail drawing. Color tolerance 3 SCDM to avoid color deviation. All exterior parts are made of stainless steel. Diffused symmetric light without glare. Light output of source is more than 110lm/ watt, CRI>70, Surge protection 10k, operating voltage 140-270V, wired with Branded LEDs of Osram/Cree or equivalent and Fulham or equivalent constant voltage/current driver with efficiency>80%, power factor>0.9, THD 10%. The CCT of led will be 3000k/4000k/5700k as required by the project. Proper thermal management for longer life of fixture, Led burning of 50,000 hours. Column light fixture is complete in all aspects with all accessories except foundation bolt. The work includes all miscellaneous parts and equipmets as required. The work will executed as per direction of E/I complete in all respect. Jaguar, kesselec, k- light, Vak light, Phillip, Mayfair) (PSR)
8
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 807(PWD)SOR-2018 (F)(ii) 40 A TPN Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
