|
| 1 | Removing existing water proofing/black top treatment including concrete padding plastering roughening of concrete surfaces ,cleaning and washing own the surfaces with water and removing debris/rubbish materials outside MOD land complete all as specified and directed. |
| 2 | M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and fair without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed. Notes : WPC shall be measured and paid separately. |
| 3 | Supply only water proofing compound complete all as specified and directed. |
| 4 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and directed. |
| 5 | M & L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete all as specified and directed. |
| 6 | M&L for water proofing treatment to roof slabs by applying one coat of bituminous/polymerized primer confirming to IS -3384 @0.30 litre/Sqm, by lying acetic polypropylene (APP) modified membrane pre fabricated, reinforced with non woven polyester, of 3.0 Kg/Sqm(minimum) 3mm thick with minimum 75 mm side overlaps and minimum 100mm and applying one coat of bituminous aluminium paint over APP membrane complete all as specified and directed. |
| 7 | Taking down chowkhat or frame with shutters without taking of shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed. |
| 8 | Taking down chowkhat or frame with shutter without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each incl making good disturbed portion including removing to store complete all as specified and directed. |
| 9 | Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 10 | Taking down 20mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 11 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as per specified and directed. |
| 12 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 13 | Supplying and laying of 16mm CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 14 | Supplying and laying of 20mm CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 15 | M&L 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed. |
| 16 | M&L for PCC type B0 1:2:4 (12.5mm graded aggregate) for holdfast blocks and filling in door frames complete all as specified and directed. |
| 17 | M&L preparation of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed. |
| 18 | M&L powder coated aluminium sliding window shutters with frames (consisting of 02 Nos glazed shutters and 01 No gauze shutter) Series -D (25mm), 3 track sliding shutters, duly fitted with neoprene beading, glazing clips, locking device, heat absorbing glass 5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauzed shutter and powder coated aluminium grill 4mm dia, 75 x 75mm aperture fixed with standard aluminium beading fixed in outer portion of the chowkhat complete all as specified and directed. |
| 19 | M&L 35mm thick factory made flush shutters, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed. |
| 20 | M&L 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkhat complete all as specified and directed. |
| 21 | M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 22 | M&L stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed. |
| 23 | S&F 200mm long aluminium anodised tower bolt of extruded section and fixed complete all as specified and directed. |
| 24 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed . |
| 25 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 26 | S&F 300mm , steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 27 | M&L 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified and directed. |
| 28 | M&L in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 29 | S&F in repair PVC (SWR) Bend radius any radius 75mm bore complete all as specified and directed. |
| 30 | S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 31 | S&F bevelled edge mirror of selected quality glass, 6mm thick, mounted on 5mm thick AC pain building board or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and directed. |
| 32 | S&F in repair, CP soap dish fixed to wall with screw complete all as specified and directed. |
| 33 | S&F in repair, 20 mm dia Aluminium anodised tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 34 | S&F in repair, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 35 | S&F in repair, 15 mm bore chromium plated fancy type long boby bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 36 | M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed. |
| 37 | M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 38 | M&L for complete removal of existing treatment of surfaces and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 39 | M&L for preparation of old decorated plastered/ unplastered surfaces applying two coats of white wash on ceiling surfaces complete all as specified and directed. |
| 40 | M & L preparation of old surfaces of wall and applying two coats of exterior weather coat for camouflage design incl necessary scaffolding complete all as specified and directed. |
| 41 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 42 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding complete all as specified and directed. |
| 43 | M&L for Vitrified Coloured Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 44 | M&L for Vitrified Coloured Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 45 | M & L for non skid coloured ceramic floor tiles of size of tile exc. 0.11 but n.exc.0.18 sqm each 7-8mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 46 | M & L for coloured glazed ceramic wall tiles of size 450x300x6-7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall cement screed bet set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 47 | M&L for Granite (of any type) tiles 15-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed. |
| 48 | Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 49 | M&L 10 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces on wall complete all as specified and directed. |
| 50 | M&L 15 mm thick rendering in CM 1:4 in two layers (10 mm thick in first layer and 5 mm thick in second layer) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement with using WPC 3% by weight of cement on wall complete all as specified and directed. (WPC shall be measured separately) |
| 51 | M&L for preparation of new surfaces applying two coats of oil bound distemper over a coat of alkhali resistant primer over a coat of wall care putty 1.5 mm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
| 52 | M&L for preparation of new surfaces applying two coats of oil bound distemper over a coat of alkhali resistant primer over a coat of wall care putty 1.5 mm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
