Name of Work:- REPAIR/ MAINT TO HARD STANDING AND DRAIN WORKS AT AF STN THOISE UNDER GE (AF) THOISE
Sl. No.
Item Description
1
Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.
2
M&L for cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) 100mm thick as in flooring and finishing the surface even and smooth without using extra cement complete all as specified and as directed.
3
Material and labour for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in plinth protection finished surfaces even and smooth without using extra cement complete all as specified and directed.complete, all as specified & directed by Engineer-in-charge.
4
M&L for Forming Contraction (Dummy) joints 100 mm deep x 10 mm wide,filled with sealing compound Grade 'B' complete all as specified and directed.
5
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including taking down of old kerb stone of any type and description and making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
6
M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6, including demolition of existing masonry complete all as specified and as directed.
7
M&L for 15 mm thick rendering on brick or concrete surfaces in CM 1:4 with , finishing the surface even and smooth without using extra cement complete, all as specified & directed by Engineer-in-charge.
8
M&L for rendering 10 mm thick in CM 1:6 using on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and as directed.
9
M&L for preparation of newly plastered surface of wall including chalk whiting, on plasetered surface etc and applying two coats of white wash on walls complete all as specified and as directed.
10
M&L for two coats of cement base paint over a coat of alkali resistant primer in camouflage pattern incl preperation of new surfaces of walls complete, all as specified & directed by Engineer-in-charge. Note: The pattern of camouflage shall be approved by GE. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
