|
| 1 | Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed. |
| 2 | M&L for cement concrete type D-2 1:4:8, 75mm thick (using 40 mm graded stone aggregate) as in Sub base complete all as specified by Engr in charge. |
| 3 | Dismantling of stone slabs of any description or thickness, Laid dry or laid dry and pointed in any mortor in floor, apron etc complete all as specified and directed. |
| 4 | M&L for chequered cement concrete tiles 30 cm x 30 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 5 | M&L for sand cushoning / Sand filling under floors (below paver blocks) including watering and consolidation, Complete all as specified and as directed by Engr-in-Charge. |
| 6 | S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 7 | Fixing only Machine pressed precast Concrete interlocking paver block any shape and 60 mm thick with grey cement and pigment obtained from Item No.3 above complete all as specified and directed. |
| 8 | S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 9 | Fixing only Machine pressed precast Concrete interlocking paver block any shape and 60 mm thick with grey cement and pigmentt obtained from Item No.3 above complete all as specified and directed. |
| 10 | M&L for Filleting in any position and to any shape in cement mortar 1:4 exc. 25 but n exc. 50sq. Cm and in repair, Complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including taking down of old kerb stone of any type and description and making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 12 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed. |
| 13 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. |
| 14 | M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and as directed. |
| 15 | M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in cement mortar 1:6, including demolition of existing masonry complete all as specified and as directed. |
| 16 | M&L for 15 mm thick rendering on brick or concrete surfaces in CM 1:4 with , finishing the surface even and smooth without using extra cement complete, all as specified & directed by Engineer-in-charge. |
| 17 | M&L for rendering 10 mm thick in CM 1:6 using on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and as directed. |
| 18 | M&L for preparation of newly plastered surface of wall including chalk whiting, on plasetered surface etc and applying two coats of white wash on walls complete all as specified and as directed. |
| 19 | M&L for preparing new plastered surface of walls and applying two coats of cement based paint in camouflage pattern over a coat of alkali-resistant priming paint, complete all as specified.Note: The pattern of camouflage shall be approved by GE. Please Enable Macros to View BoQ information |
