|
| 1 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in deep in hard/dense soil/ road for getting out old GI tubing from the trenches etc, complete all as specified and as directed. |
| 2 | Removing excavated material of any type of soil/soft rock from site to a distance not exceeding 50mtr away and depositing where directed not exceeding 1.5mtr above the starting point, complete all as specified and as directed. |
| 3 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil, complete all as specified and as directed. |
| 4 | Taking up or down old unserviceable GI/CI/MS tubing and connetions including all fittings from the trenches , wall , floor etc, complete all as specified and as directed. |
| 5 | (a) 15 mm bore size |
| 6 | (b) 20 mm bore size |
| 7 | (c) 25 mm bore size |
| 8 | (d) 40 mm bore size |
| 9 | (e) 50 mm bore size |
| 10 | (f) 80 mm bore size |
| 11 | (g) 100 mm bore size |
| 12 | (h) 150 mm bore size |
| 13 | S & F GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down existing GI/CI pipe for the following sizes, complete all as specified and as directed. |
| 14 | (a) 15 mm bore size |
| 15 | (b) 20 mm bore size |
| 16 | (c) 25 mm bore size |
| 17 | (d) 40 mm bore size |
| 18 | (e) 50 mm bore size |
| 19 | (f) 80 mm bore size |
| 20 | (g) 100 mm bore size |
| 21 | (h) 150 mm bore size |
| 22 | Dismantling the old but serviceable pipe 150 mm bore from the site and transporting to the wksp for cutting of old and unsv flange and supply and fixing of new flange 6 mm thick with 150 mm bore GI pipe with jointing material such as nuts, bolts with washers of appropriate size with rubber gasket 6 mm thick of good quality, complete all as specified and as directed. |
| 23 | Dismantling the old but serviceable pipe 100 mm bore from the site and transporting to the wksp for cutting of old and unsv flange and supply and fixing of new flange with 100 mm bore GI pipe with jointing material such as nuts, bolts with washers of appropriate size with rubber gasket 6 mm thick of good quality, complete all as specified and as directed. |
| 24 | Supply and fixing MS flange suitable for 100 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick , complete all as specified and as directed. |
| 25 | Supply only MS flange suitable for 100 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick, complete all as specified and as directed. |
| 26 | Supply and fixing MS flange suitable for 150 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick, complete all as specified and as directed. |
| 27 | Supply only MS flange suitable for 150 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick, complete all as specified and directed. |
| 28 | S&F Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm dia, complete all as specified and as directed. |
| 29 | S&F Cast iron Sluice Valve ISI mark (PN-1.6) confirming to IS 14846-2000, flanged ends drilled having stainless steel / brass spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets of size 150 mm bore, complete all as specified and as directed. |
| 30 | Supply only Cast iron Sluice Valve ISI mark (PN-1.6) confirming to IS 14846-2000, flanged ends drilled having stainless steel / brass spindle with cast iron wheel at top complete of size 100 mm bore, complete all as specified and as directed. |
| 31 | All as per item -30 above but of sizes 80 mm bore, complete all as specified and as directed. |
| 32 | M&L masonary valve chamber of size 1000 x 1000 x 1000 mm (Internal dimensions) and including including excavation and earth work in any type of soil, 100 mm thick PCC 1:4:8 type D2 foundation, brick work in cement mortar 1:6, plastering internal and external surface 15 mm thick in CM 1:4, PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) coping, 50 x 50 x 6 mm thick MS angle iron, 5 mm thick MS plate cover with locking arrangement, painting exposed steel surfaces with synthetic enamel paint two coats over a coat of zinc chrome primer, complete all as specified and as directed. |
| 33 | Supply and fix ball / roller bearing for pumps and motors of 25 HP capacity including taking down old bearing and re installation at site including testing on completion, complete all as specified and as directed. |
| 34 | M&L for servicing monoblock/centrifugal pumping set 2.5 HP to 25 Capacity including dismantling and opening at workshop, replacement of defetive impeller , lock key ,replace the worn out bearing , rubber coupling , gasket 3 mm thick , glands packing ,stuffing box, mechincal seal and rusted nut, bolts etc assembling properly , greasing all movable parts, fixing in position, testing and commissioning, complete all as specified and as directed. |
| 35 | All as per item No 34 but Pump capacity 30 to 75 HP, complete all as specified and as directed. |
| 36 | Dismantling the unserviceable electric motor of 415 volts any make and type , capacity and transporting to reputed workshop, taking out old and burnt winding wire and rewinding with super enameled copper winding wire of existing gauge and size with insulating materials, varnishing and baking etc, re-fixing the same at site and re-alignment with coupling with pumping set , testing and commissioning, complete all as specified and as directed. |
| 37 | Cleaning of raw water collection tank of 1 x 20000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor,walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls, complete all as specified and as directed. |
| 38 | Cleaning of raw water collection tank of 1 x 40000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor,walls and washing out tank with alum mixed water and finally with clear water, complete all as specified and as directed. |
| 39 | Cleaning of treated water under ground collection tank of 2 x 62000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor, walls and washing out tank with alum mixed water and finally with clear water complete with white wash on walls, complete all as specified and as directed. |
| 40 | Cleaning of treated water under ground collection tank of 2 x 20000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor, walls and washing out tank with alum mixed water and finally with clear water complete with white wash, complete all as specified and as directed. |
| 41 | Cleaning of treated water under ground collection tank of 2 x 25000 GLN capacity by removing mud/wet slit from inside tank and depositing to a distance not exceeding 50 mtrs and cleaning of tank scrubbing the slit and scale from floor, walls and washing out tank with alum mixed water and finally with clear water complete with white wash, complete all as specified and as directed. |
| 42 | Supply and fix in repair of taking out old unserviceble starter 2.5 HP motor from the panel and installing new at site, testing and commissioning , complete all as specified and as directed. |
| 43 | Taking out old and unserviceble star delta starter suitable for 25 to 75 HP motor from the mounting and opening complete after draining out oil in a vessel , replacement of old work out moving contact , bushing etc and re-installing at site , testing and commissioning, complete all as specified and as directed. |
| 44 | Cleaning with washing soda and removing all scale and dirt, etc, from tanks of capacity 500 ltrs hoisted at site in position carefully with soft wire brush and flushing including writing the date of cleaning at easily visible postion out, complete all as specified and as directed. |
| 45 | All as per above item No - 44 but of tank capacity more than 500 but upto 1000 ltrs, complete all as specified and as directed. |
| 46 | Cleaning of OH tank of 50000 GLN capacity with bleaching and washing soda and removing all scale and dirt, etc, from tanks with soft wire brush and flushing out complete including writing the date of cleaning at easily visible postion out, complete all as specified and as directed. |
| 47 | S&F Gun metal gate valve 20 mm bore with iron hand wheel head , screwed both ends for iron pipes and fixed complete including dismantling old and unsv, complete all as specified and as directed. |
| 48 | S&F Ball valves brass high pressure with polyethelene float and fly nut complete screwed for iron pipes or brass ferrule suitable for 20 mm dia bore pipes/iron fittings , complete all as specified and as directed. |
| 49 | S&F Gun metal gate valve 25 mm bore with iron hand wheel head , screwed both ends for iron pipes and fixed complete including dismantling old and unsv, complete all as specified and as directed. |
| 50 | S&F Gun metal gate valve 50 mm bore with iron hand wheel head ,screwed both ends for iron pipes and fixed complete including dismantling old and unsv, complete all as specified and as directed. |
| 51 | M&L for Disconnectinng and dismantling unserviceble Centrifugal pumping set of singlestage/multistage from site and ttransport to the workshop for repair/replacement of defetive parts like impeller, shaft, lock key, worn out bearing, rubber coupling, gasket 3 mm thick, glands packing, stuffing box, mechincal seal and rusted nut, bolts etc and reassembling properly, greasing all movable parts, fixing in position, testing and commissioning at site all as directed by Engr-in-Charge for the following capacity of pumps. Note : (i) A warranty of one year shall be given for satisfactory performance of pump set (ii) Alternative arrangement of pump set for water supply will be arranged by the contractor if the pump is not repaired within five days, a penalty of Rs 1000 per day will be deducted and no extra cost willl be paid to the contractor un less natural calamidity is occured. (iii) All the T&P items i.e. chain pully block & tripart shall be arranged by the contractor without claiming any extra cost. |
| 52 | (a) 10-25 HP Centrifugal Pump |
| 53 | (b) 30-75 HP Centrifugal Pump Please Enable Macros to View BoQ information |
| 54 | (b) 30-75 HP Centrifugal Pump Please Enable Macros to View BoQ information |
