|
| 1 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR-5.3) |
| 2 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. DSR-5.22.1 |
| 3 | Brick Work 1:4 Cement / Coarse Sand Mortar In Super Sturcture. (DSR-6.4.1) |
| 4 | 12mm thick plaster in cement & fine sand of 1.25 fineness modulous mortar in 1:4 Including supply of all materail labour T&P required for proper completion of the work (DSR-13.1.1) |
| 5 | Hard drawn steel wire fabric,Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion. (5.22.5) |
| 6 | Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300 mm long with necessary screws etc completenas. (DSR-9.62.1) |
| 7 | Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 100mm long with necessary screws etc completenas.(DSR-9.63.1) |
| 8 | Providing and fixing ISI marked oxidised M.S.door handles 75 mm long conforming to IS:4992 with necessary screws etc completenas.(DSR-9.66.1) |
| 9 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR-9.20.1). |
| 10 | Providing and fixing galss panes with putty and glazing clips in steeel doors,windows,clerestory windows all complete with 4 mm thick galss panes. (DSR-10.30.1) |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.(40 mm thick with 20 mm nominal size stone aggregate). (DSR-11.3.1). |
| 12 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm (DSR-11.47.2) |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-11.40). |
| 14 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. (DSR-13.80) |
| 15 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm. (DSR-13.48.1). |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (DSR-13.62.1). |
| 17 | Other Hidden Miscellenous Work. |
| 18 | Earth Work In Surface Excavation Not Exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and didposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All Kinds of soil. |
| 19 | P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1:1½:3 ( 1 cement : 1½ coarse sand (zone - III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Foundation of Septic Tank. |
| 20 | Providing and laying in position cement concrete of specifed grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 ( 1 cement : 2 coarse sand (zone - III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). Septic tank sloping floor. |
| 21 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). |
| 22 | 12mm Cement Plaster Finished With a floting coat of neat cement of mix : 1:3 (1 cement : 3 fine sand). |
| 23 | Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 24 | Steel Reainforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing in Position And Binding All Complete Upto Plinth Level.Themo-Mechanically Treated Bars Of Grade Fe- 500D or more. |
| 25 | Providing M.S. Foot Rests Including Fixing in Main Hole With 20X20X10 cm cement concrete blocks 1:3:6, With 20X20 mm Square Bar. |
| 26 | Providing And Fixing Of Soil, West And Vent Pipes: 75 mm diameter, Centrifugally cast (spun) iron socketed pipe as per IS: 3989. |
| 27 | Providing And Fixing Terminal Guard: 75mm, Sand Cost iron S&S as per IS - 1729. |
| 28 | Copper Wire 2.50mm |
| 29 | Copper Wire 1.50mm |
| 30 | LED Point |
| 31 | LED Bolb |
| 32 | Socket Point |
| 33 | Miscellenous Work for Electrification |
| 34 | Cistern (DSR 17.6.1) |
| 35 | wash Besin (550X400mm) (DSR17.7.3) |
| 36 | PVC Connection Pipe (DSR 18.21.1.2) |
| 37 | Bracket (Code No. 1309) |
| 38 | West Jali (MR) |
| 39 | Wast Pipe (17.28.1.1) |
| 40 | PVC Pipe 110 mm (DSR 12.41.2) |
| 41 | G.I. Pipe 25 mm (DSR 18.10.3) |
| 42 | Elbow (Code No. 7363) |
| 43 | G.I TEE 25 mm (Code No. 1608) |
| 44 | Socket (Code No. 8786) |
| 45 | Long Body Bib Cock (DSR 18.51.1) |
| 46 | WC Pan (DSR17.1.1) |
| 47 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. (DSR-17.24) |
| 48 | Supply & Fixing Of PVC Pipe 100 mm (DSR 12.41.2). |
| 49 | Miscellenous Work for Sanitary. Please Enable Macros to View BoQ information |
