|
| 1 | Engagement of labour for making cross bandh in the front side vent to restrict the inflow of run off water in to the vicinity of working place during the entire working period with the help of sand or local soil filled gunny bags and removing the all sand or soil filled bag after completion of entair work as per drawing , specification and direction of E.I. |
| 2 | Disposal of coffer dam after complete the job as per specification and direction of E/I. |
| 3 | Cost for dewatering from the gate vent for stack water and seepage water by 10 H.P. dry pump during the working period as per specification and direction of E/I. |
| 4 | Labour charge for complete cleaning, washing of gates, vents & worksite for removing sand, soil, stone and other obstacles for easy working and smooth operation including all labours and materials as per specification & direction of E/I. |
| 5 | Extraction of the old, damage & unserviceable gate roller path(s.s.) and top rubber seal path (s.s.) including all labours, tools and other equipment as per direction of E/I. |
| 6 | Providing fabricating, fitting & fixing of Embedding Component of 1 no. gate. i.e. S.S. flat for rollar path 100mm width , 5mm thick and for Top seal 80mm width & 6 mm thick ,Side seal path – 75mm wide & 6mm thick and Bottom seal path - 70 mm wide & 6mm thick as per specification and direction of E/I. |
| 7 | Providing , fabrication, fitting & fixing solid bulb knot type teflone cotted musical rubber seal (both side of gate) size– 44D×125L×12T, wedge type flat rubber seal sixe 12Tx75L(For bottom side of gate) and For Top rubber seal – Double ended central bulb type tefflon coated & counter sunk bolt SS. material 12Dx75L, M.S. Clamp plate & Clamp base plate - For Top rubber seal- 75mm(w) & 8mm (t), For side seal - 75mm(w) & 8mm (t) & For bottom seal - 75mm(w) & 8mm (t) inculuding welding accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting etc as per design, drawing, specification & direction of E/I |
| 8 | Providing fabricating, fitting & fixing Angle Mesh of M.S. materials ISA 50mm X50mm x 6mm at vents on maintenance platform ( for all vent) for sefty point of veiw inculuding welding accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting etc as per design, drawing, specification & direction of E/I. |
| 9 | Providing fabricating, fitting & fixing railing in front of door for sefty point of veiw of Railing post ISA 75x75x8mm , Railing ISA 50x50x6mm inculuding welding accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting etc as per design, drawing, specification & direction of E/I |
| 10 | Providing fabricating, fitting & fixing fixing M.S. door in front of ladder – 5mm thick M.S. plate for door,ISA 50X50X6mm for frame , L-Drop, Kabja etc. inculuding welding accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting etc as per design, drawing, specification & direction of E/I |
| 11 | Providing overhauling and repairing of hoisting arrangement i.e. Rope Drum m/c including cleaning of m/c, coupling, , clutch , wheel, axil, channel, wire rope, handle, change of oil seal kit etc. and all materials such as grease, mobile, cadmium compound etc. with mechanic and labour all complete job as per specification and direction of E.I. |
| 12 | S.I.T.C. of following rating LED Flood lighting luminare with pressure die cast housing and toughened glass cover (IP66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50HZ. Luminarie shall be confirm to IS:10322 Part-5/section-5 and shall be complete with all necessary accessories as required, 30W LED Flood light. (SOR 2022 Energy 9.2.2) |
| 13 | 2.0 sq mm ISI Marked, FR LS PVC insulated,single core copper conductor cable (SOR2022 energy M445) |
| 14 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including painter& helper and cast of scaffolding and taxes all complete as per building specification and direction of E/I. (S.O.R.22/A/P-54) |
| 15 | Providing two coats of painting with ready mixed paint of approved shade and make over steel surface thoroughly scaffolding and taxes,including painter and helper , all complete as per building specification & direction of E/I. (S.O.R.22/A/P-85) |
| 16 | Repair/Replacement and Maintenance Including Greasing (quarterly), Lubrication (quarterly of two service gate ,two emergency gate and its components, Hoisting arrangement & its components, Railing, Door (Gate), S.I.T.C. LED Flood light,Electrical wire (at Dam Outlet at CH - 19.20) Including Labour Charge, Overhead Charge, workshop &energy charge, transport &erection charge, other incidental charge, contractor profit and cost of miscellaneous jobs like welding ,nut bolts fitting etc. |
| 17 | GST @ 18% |
| 18 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
