|
| 1 | Dismantaling of old AC sheet (corrugated, semicorrugated, etc.) of any size from roof at any height. |
| 2 | Dismantling of plain or corrugated steel sheeting (CGI/Galvalume), any gauge, thickness, including Nainital or similar pattern roof coverings all as directed by EIC. |
| 3 | Takign down/ dismantling of MS valley gutter, pipes etc of any description & in any position. |
| 4 | S&F of mild steel valley gutter 3.0/ 3.15 mm thick including bending, turning up to required shape & size, with riveted,bolted or welded attachment with all necessary items which is required. (Make: Sail, TATA, Jindal) (Fe290, Gde E 165) |
| 5 | M&L for preparation of new iron surface apply one coat of red oxide and two coat of synthetic enamel paint on prepared surface.Make Apcolite-Asian Paints, Superlac Hi Gloss-Shalimar Paints, Luxol -Berger Paint. |
| 6 | Re-fixing of 6mm thick asbestos cement, (Except sheet) corrugated or semi-corrugated sheets in roofs, walls etc. (Fixed with L-type or J-type or cranked hook bolts) |
| 7 | Fixing only of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet (Except sheet) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 8 | S&F of 6.0mm thick one side colour Non Asbestos roofing sheet with Polyproplene fibre for reinforcment of the produt, Supply width 1050.0 mm Covered width 1010.0 mm, complete fixed with GI nut , diamond shape Galvanised steel washer, diaomand shape sealing nuprene bituminous washr galvanised 'L' or 'J' hook as per IS-14871 (Make: Ramco, Charminar, Jindal) |
| 9 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering,fixed with self tapping screws and silica sealing compound, profile, shape & size as per site requieremnt. (Make: Tata, Kamdhenu, Jindal) |
| 10 | S & F of pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in Ridge covering, Frill, Facia, etc fixed with self tapping screws, shape & size as per site requieremnt. (Make: Tata,Kamdhenu, Jindal) |
| 11 | S &F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.(fixed with L-type or J-type or cranked hook bolts in lieu of screws) Make: TATA, JINDAL, Kamdhenu |
| 12 | S&F of 2mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, cladding etc. |
| 13 | Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick sur rounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse. |
| 14 | Fixing of sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane.(Exept material) |
| 15 | M&L of rough cast wired glass, 6.4mm thick and glazing with oil putty in square exc 1.0 sq.mtr but n exc 1.5 sq.mtr in each pane. |
| 16 | Supply & fabrication of 1.25mm thick Mild steel, plain, black sheet for Downtake pipe/ Rain water pipe etc dia exc 100mm and n.exc 250mm dia with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as directed by EIC. |
| 17 | Cleaning of valley gutters along with cleaning of attached downtake pipes at any height by brooming leavs, vegetable growth, broken building material, debris etc and scraping out deposited soil , dust etc by scraping , wire brushing & finally brooming down to obtaine clear gutter surface. The down take pipes should be properly cleaned from both top gutter surface and bottom surface with help of bamboo & broom. |
| 18 | Cleaning of RCC roof along with cleaning of attached downtake pipes at any height by brooming leavs, vegetable growth, broken building material, debris etc and scraping out deposited soil , dust etc by scraping , wire brushing & finally brooming down to obtaine clear gutter surface. The down take pipes should be properly cleaned from both top gutter surface and bottom surface with help of bamboo & broom. |
| 19 | M&L for cleaning the surfcae of crack AC/CGI sheet, gutters etc and fixing adhesive tape 1.5mm thick & 100 mm wide.( Make: 3M , pidilite, super flash, STP ) |
| 20 | S&F of PVC(SWR) Pipes of dia 150 mm with all acceroies like 'T', Band, Socket, etc, complete as per site requirement.Make: Kishan, Supreme, Astral, Finolax. |
| 21 | S&F of PVC(SWR) Pipes of dia 200 mm with all acceroies like 'T', Band, Socket, etc, complete as per site requirement.Make: Kishan, Supreme, Astral, Finolax. Please Enable Macros to View BoQ information |
