Name of Work:- ANALYSIS OF OIL & WATER FOR NAVY VESSEL RM.0827
Sl. No.
Item Description
1
ANALYSIS OF LUB OIL, COOLENT, HYDRAULIC OIL AND PORTABLE WATER. PAYMENT BASED ON THE ACTUAL. ANALYSIS OF LUB OIL, COOLENT AND PORTABLE WATER OF ALL MAIN ENGINES, DIESEL ALTERNATORS, GEAR BOXES AND AUXILARY MACHINERIES TO BE CARRIED THROUGH NABL CERTIFIED LABORATRY AND THREE COPIES OF THE EACH REPORT TO BE SUBMITTED WITHIN 1 WEEK OF TEST UNDERTAKEN.
2
(A) LUB OIL TEST(I) BASIC TEST:- THE BASIC TEST OF LUB OIL SHOULD COVERS THE FOLLOWING:-(a) BY USING METHOD OF ASTM D445 :- (aa) VISCOSITY @ 40 DEGREE C (CST) (ab) VISCOSITY @ 100 DEGREE C (CST) (ac) VISCOSITY INDEX (CALCUATED)
3
(b) WATER CONTENT (% VOL) BY ASTM D95 METHOD. (c) FLASH POINT ( DEGREE CENTIGRADE) BY ASTM D92 METHOD (d) TBN (MG KOH/G)) BY ASTM D644 METHOD(e) TAN (MG KOH/G)) BY ASTM D644 METHOD
4
(II) ADVANCE TEST :- THE ADVANCE TEST OF LUB OIL SHOULD COVERS THE FOLLOWING BY USING ASTM D5185 METHOD:- (a) WEAR METALIC PARTICALS OF FE, CR, NI, AL, CU, SN, PB AND AG TO BE ANALISED IN TERMS OF PPM IN THE GIVEN SAMPLES OF LUB OIL. (b) CONTAMINANTS OF SI, NA AND MG TO BE ANALISED IN TERMS OF PPM IN THE GIVEN SAMPLES OF LUB OIL.
5
(B)COOLANT TEST / FRESH WATER ADDITIVE TEST:- THE FOLLOWING PARAMETERS TO BE ANALYSIS FOR GIVEN SAMPLE: (i) PH VALUE (ii) CHLORIDE CONTENT (iii) PERCENTAGE OF INHIBITOR (iv) HARDNESS (v) ANY OTHER TEST REQUIRED.
6
(C) POTABLE WATER TEST TO BE CARRIED OUT TO ACERTAIN THE SUITABLITY FOR DRINKING WATER
7
(D) HYDRAULIC TEST:-(a) BASIC TEST SHOULD COVERS THE FOLLOWING :- (i) VISCOSITY @ 20% IN TERMS OF CST BY USING METHOD OF ASTM D445(ii) VISCOSITY @ 50% IN TERMS OF CST BY USING METHOD OF ASTM D446(iii) VISCOSITY INDEX RESULTS BY CALICULATIONS BY USING METHOD OF ASTM D447(iv) TESTING BY VISUAL / APPREARANCE(v) WATER CONTENT TEST BY CRACKLE (vi) WATER CONTENT TEST IN TERMS % VOL BY USING METHOD OF ASTM D95(vii) PENTANE INSOLUBLE TEST IN TERMS OF % WT BY USING METHOD OF ASTM D893(viii) TOLUENE INSOLUBLE TEST IN TERMS OF % WT BY USING METHOD OF ASTM D893(ix) TAN TEST IN TERMS OF MG KOH/G BY USING METHOD OF ASTM D644(x) SALT CONTENT TEST IN TERMS OF PPM BY USING METHOD OF IP 77(xi) FLASH POINT TEST IN TERMS OF DEGREE CENTIGRADE BY USING METHOD OF ASTM D92/ 93
8
(b) HYDRAULIC ADVANCE TEST SHOULD BE CARRIED OUT TO FIND OUT THE MEASUREMENT OF CONTAMINATION (SIZE OF QUANTITY OF MECHANICAL IMPURITIES) BY USING THE METHOD OF DEFSTAN 5-56/ ISSUE 2 (1982) TO MEET THE ISO 11500.
9
(E) PROVISION OF CONTAINERS/ SAMPLE BOTTLES:- STANDARD CONTAINERS/ SAMPLE BOTTLES (CAPACITY OF 250 ML) TO BE PROVIDED BY SHIPYARDS FOR LANDING THE SAMPLES OF LUB OILS, COOLANTS, HYDRAULIC OILS ETC FOR ANALYSIS. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
