|
| 1 | Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required, (fittings to be paid separately). MDF board conforming to IS: 14587 edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand. |
| 2 | Providing and fixing in position cabins made of 19mm ply with partitions of size 2'-0\\" x4-0\\" with depth of 2'-0\\" the fron doors shall be of 19mm ply with teak wood veineering on all exposed sides with all accessories complete I;e locks, tower bolts, all complete finished face to be measured incl. all hardware fittings and fixtures complete. |
| 3 | Providing and fixing wooden storage rack (1'6\\" deept) made of 18mm thick BWR grade plywood, incl. all necessary wooden battens/supports, screws, adhesives, cutting, complete as per drawing and site requirement. |
| 4 | P/F of 1.5mm thick decorative laminated sheet incl. all fixtures/fittings all complete job. |
| 5 | Providing and fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge |
| 6 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer’s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 7 | French spirit polishing, Two or more coats on new works including a coat of wood filler all complete. |
| 8 | Providing and fixing of 12mm thick laminated wooden flooring of approved brand and make over 4mm thick foam under layers incl. all fittings/fixtures, carriage all complete as per directions of EIC. |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work all complete. |
| 10 | Providing, installing, testing and commisioning wall mounted split type air conditioner of 2.00 TR capacity, 5-star BEE rated, complete with indoor and outdoor units, invertor/rotary compressor, copper refrigerant piping with insulation, drain piping elctrical wiring, MCB, remote control, stand/clamps for outdoor unit, vacuming gas charging and all accessories, complete as per specifications and directions of the EIC Note:- The AC must be of superior/reputed quality and make, performing between temperature range of 10 degree celcius to 52 degree celcius (Hot & Cold type 3-Star BEE rating) with automatic wall mounted stablizer of reputed make and suitable capacity with these additional specifications, the rates given against said item are as per LMR . |
| 11 | Electrification:- Supply, Installation, Testing & Commissioning of RFID Station Reader having following specifications:Operating Frequency: UHF 860–960 MHz,Protocol: EPC Class 1 Gen2 / ISO 18000-6C compliant,Read/Write capabilityMinimum read range: Up to 8 meters (environment dependent),Interfaces: USB 2.0 / Ethernet / TCP-IP,Anti-collision support,LED & buzzer indication,Compatible with Koha LMS,Complete with antenna, power supply & accessories.The Job includes 2-years replacement warrenty from OEM from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Makes: Zebra/Honeywell/Impinj/Equivalent & Shall be approved not less than SDO. |
| 12 | Supply, Installation, Testing & Commissioning of RFID Security Gate Antenna System having following specifications:Dual pedestal gate system ISO 18000-6C / ISO 15693 compliant,Detection coverage: Minimum 90–120 cm,Audio & visual alarm system,Adjustable sensitivity control,Ethernet / TCP-IP connectivity,Powder coated aluminum bodySuitable for indoor institutional use.The Job includes 2-years replacement warrenty from OEM from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Makes:Checkpoint Systems/Impinj/Bibliotheca/Equivalent & Shall be approved not less than SDO. |
| 13 | Supply, Installation, Testing & Commissioning of RFID Hand held Reader having following specifications:UHF 860–960 MHz,Android based operating system,Integrated 1D/2D barcode scanner,Minimum 4GB RAMBattery: Minimum 6000 mAh,Wi-Fi & Bluetooth connectivity,Rugged IP rated casing,Minimum 8 hours continuous operation.The Job includes 2-years replacement warrenty from OEM from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Make: Zebra/Honeywell/Chainway/Equivalent & Shall be approved not less than SDO. |
| 14 | Supply, Installation, Testing & Commissioning of Digital Entry Register System having following specifications:7” or higher touch display RFID card-based entry logging,Storage capacity minimum 50,000 logs,Ethernet enabled Real-time monitoring software,Wall mount type,230V AC operation.Approved Makes: Hikvision/Bosch/HID Global/Equivalent & Shall be approved not less than SDO. |
| 15 | Supply, Installation, Testing & Commissioning of OPAC Self-Service Kiosk having following specifications:21.5” Industrial touch screen,Integrated RFID reader (ISO 15693 compliant),Intel i5 or higher processorMinimum 8GB RAM,256GB SSD,Thermal receipt printer,Heavy duty metallic enclosure,Windows 11 Pro licensed Approved Makes: ADVANTECH/Datalogic/Bibliotheca & Shall be approved not less than SDO. |
| 16 | Supply, Installation, Testing & Commissioning of RFID 1K Smart Cards having following specifications:ISO 14443A compliant,Memory: 1 KB EEPROM,Frequency: 13.56 MHz,Printable PVC body,Unique serial number pre-encoded Approved Makes:HID Global/NXP MIFARE/Identiv/Equivalent & Shall be approved not less than SDO. |
| 17 | Supply, Installation, Testing & Commissioning of RFID Library Tags having following specifications:Passive UHF RFID tag,EPC Gen2 / ISO 18000-6C compliant,Minimum read range 5 meters,Tamper evident adhesive backing,Optimized for books & library material Approved Makes: Avery Dennison/Confidex/Smartrac/Equivalent & Shall be approved not less than SDO. |
| 18 | Supply, Installation, Testing & Commissioning of Institutional Barcode Labels having following specifications:Polyester durable label,Thermal transfer printable,Waterproof & tear resistant,Suitable for book spine application Approved Makes: Avery Dennison/ Brady/ 3M /Equivalent & Shall be approved not less than SDO. |
| 19 | Supply, Installation, Testing & Commissioning of 55” Commercial Digital Signage Display having following specifications: 55” Commercial grade panel,4K UHD (3840 × 2160) resolution,Brightness minimum 500 nits,16/7 or higher operating rating,HDMI / USB / LAN ports,Wall mounting bracket included Approved Makes: Samsung/ LG/ Sony/ Equivalent & Shall be approved not less than SDO. |
| 20 | Supply, Installation, Testing & Commissioning of Digital Signage CMS Software having following specifications:Centralized content management,Remote scheduling capability,Multi-user access control,Remote diagnostics Minimum 3-year licenseApproved Makes: Samsung MagicINFO/LG SuperSign/BrightSign CMS/Equivalent & Shall be approved not less than SDO. |
| 21 | Supply, Installation, Testing & Commissioning of Media Player for Digital Signage having following specifications: 4K content playback support ,HDMI output Ethernet/Wi-Fi enabled,HTML5 compatible,Solid state storage Approved Makes: BrightSign/Intel/Iadea/Equivalent & Shall be approved not less than SDO. |
| 22 | Supply, Installation, Testing & Commissioning of Card Printer having following specifications: Dye sublimation printing technology,Resolution: 300 dpi,Single/dual side printing,RFID encoding module support,USB & Ethernet connectivity Approved Makes: Zebra/Evolis/Magicard/Equivalent & Shall be approved not less than SDO. |
| 23 | Supply, Installation, Testing & Commissioning of Koha Library Management Software having following specifications:Latest stable Koha version,Modules: Circulation, Cataloguing, OPAC, Reports,RFID integration support,Data migration & staff training,Minimum 1 year support Approved Makes: ByWater Solutions / Equinox IT / LibLime Koha /Equivalent & Shall be approved not less than SDO. |
| 24 | Supply, Installation, Testing & Commissioning of RFID Middleware Software having following specifications:Integration with RFID readers & gates,Gate alarm monitoring,Self-check station compatibility,Reporting & analytics dashboard & Koha LMS compatibility Approved Makes: Bibliotheca/3M Library Systems/ Checkpoint/ Equivalent & Shall be approved not less than SDO. |
| 25 | Supply, Installation, Testing & Commissioning of Server System having following specifications:Intel Xeon / Core i7 processor,Minimum 32GB DDR4 RAM,1TB SSD storage with RAID support,Dual LAN ports,Windows Server / Linux compatible,3 years OEM onsite warranty Approved Makes: Dell/HPE/Lenovo/Equivalent & Shall be approved not less than SDO. |
| 26 | Supply/Laying/Connecting/Testing & Commissioning of Networking Data armoured Cable 4-Pair CAT-6 of D-link/Schinider/Legrand/Equivalent Make with End termination in recessed/surface conduits, mounted raceways and partly in existing cable ducts in modular furniture complete as per specifications and as required & Shall be approved not less than SDO. |
| 27 | Supply, Installation, Testing & Commissionig of 24-Port Managed Networking switches of Cisco/Juniper/D-Link/Equivalent & Shall be approved not less than SDO.Incl making of necessary connections by networking computer Engineer having following specificationsModel:- 10BASE-T/100BASE-TX/1000BASE-T: 244 100/1000 Mbps GbE/SFP combo portsPerformance : :Switching Capacity: 56Gbps:Min. Packet Forwarding Rate: 41.7 Mpps:MAC Address Table: 8K and 4.1 Mbits Packet Buffer.: Static routing: 124 Static routesStatic MAC Entries: 256 entries: Power Supply: Internal AC Power Supply,Switch Category :-Gigabit Managed SwitchesLayer 2 Features :Spanning Tree (SP) 802.1d: RSTP 802.1, 802.1s MSTP : Loopback Detection: Link Aggregation LACP 802.3ad: Minimum 8 groups per device and 8 ports per group; Port Mirroring : One-to-One / Many-to-One: Jumbo Frame: 10K Bytes: Dual image & Dual configuration: Multicast Filtering |
| 28 | Supply/Installation/Testing & Commissioning of RJ-45 Cat-6 Shuttered NET JACK Modular Series of Modular Switch,Modular Plate,Cover in front,Modular blanking plate & suitable GI box etc ISO/IEC Certified Havells/ Legrand/Panasonic/Anchor Rooma Plus/Schneider/Eq Make & shall be approved before execution of work. |
| 29 | Supply & Installation of IP-20 & IK-08, UL Listed Wall/Floor mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door, Vertical Mounting Rail 1.6 MM with 'U'Marking, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware, 1 No of 19\\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge For additional technical parameters of products/ work, refer Annexure \\"A\\" attached with this BSR of D-Link or Equivalent Make Including Supply of power extension cord etc:-15 U Rack with Width 600 mm & Depth 600 mm + 100 mm |
| 30 | Supply, installation, testing and commissioning of 3KVA/96V without isolation with 26 Ah of 8 No. of batteries of Exide/Amron/Luminious Make.The Job further includes Accessories : Rack for Batteries ,Cabling ,6meters( Input up to 5mt and out put 5mts) as required at site. |
| 31 | Supply,Installation,Testing and Commissioning of CAT-6, 8 port jack panel for termination of CAT-6 cable, testing and certification of network with Omini penta scanner of each cable of reputed make as desired by EIC (HP/DIGISOL/D-LINK) & Shall be approved not less than SDO. |
| 32 | Wiring in 1.5 Sq.mm 3-Core flexible, PVC insulated, round sheathed and annealed bare multi stranded copper conductor withstand voltage up to 1.1 KV. Polycab/Havells/RR-Kabel/Paraflex/Equivalent Make for service connection wires from bottom to top of the pole. (Complete in all respects). |
| 33 | Supply,Fixing,Testing and Commissioning of 25 sqmm PVC Conduit with accessories like Bend,Saddles and nails etc of BCH/Ravindra/Anchor/Equivalent Make. |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/Equivalent Make & shall be approved before execution of work. Please Enable Macros to View BoQ information |
