|
| 1 | Repairs to Charpoy GI 32mm/25mm ply top (Drg No FD-220R, ) |
| 2 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, rest all as specified and directed by Engineer-in-Charge. |
| 3 | (a) S&F new plywood top of size 1980mmx900mmx12mm thick BWR grade ISI Marked and corner of the ply shall be round shape |
| 4 | (b) S&F new long rail made out of GI Pipe 25/32mm, rest all as per item No 1.01. |
| 5 | (c) M&L for preparation of short rail from long rail obtained from sl No 1.03, rest all as per Item No 1.01. |
| 6 | (d) M&L for preparation of leg from long rail obtained from sl No 1.02, rest all as per Item No 1.03. |
| 7 | (e) S&F new check nuts of 25/32 mm dia heavy duty, rest all as per item No 1.01. |
| 8 | (f) S&F new GI elbow, 3 way, 25/32mm bore (ISI marked), rest all as per item No 1.01. |
| 9 | (g) S/F new support made out of 40 x 6 mm flat iron, 850 mm long duly welded to charpoy including applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified in Drawing and directed. |
| 10 | REPAIR TO CHAIR WRITING WITH CUSHION SEAT AND BACK (DRG NO FD/E6/MAP/12) |
| 11 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, rest all as specified and directed by the Engineer-in-Charge. |
| 12 | (a) S&F new seat with appropirate approved quality |
| 13 | (b) S&F new back with appropriate approved quality, rest all as per item No 2.01. |
| 14 | (c) S&F new arm rest (handle), rest all as per item No 2.01. |
| 15 | (d) S&F new rubber stopper, rest all as per item No 2.01. |
| 16 | (e) M&L for welding of MS tubular frame of chari writing, rest all as per item No 2.01. |
| 17 | (f) M&L for one coat of synthetic enamel paint on MS tubular fram, rest all as per item No 2.01. |
| 18 | Repair to Chair Verandah (Drg No FD-19(M), FD-256, FD-359 & FD/E6/MAP-II/06 |
| 19 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, rest all as specified and directed by Engineer-in-Charge. |
| 20 | (a) Re-caning of Chair Verandah with 4mm wide & 0.4mm thick half round plastic. |
| 21 | (b) Gas welding of broken part, rest all as per item No 3.01. |
| 22 | (c) S&F new leg, rest all as per item No 3.01. |
| 23 | (d) S & F new PVC seat & back 4 mm thick (Make : Amco), rest all as per item No 3.01. |
| 24 | REPAIR TO TABLE DINING OR'S STEEL WITH ALUMINIUM TOP (Drg No FD-165) |
| 25 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 26 | S&F new table top as per drawing and rest all as per item No 4.01. |
| 27 | (b) M&L for gas welding to broken joints/spots rest all as per item No 4.01. |
| 28 | (c) S&F new legs of table, rest all as per item No 4.01. |
| 29 | Repairs to Almirah Large Steel/Glazed/ 1/2H&1/2S/MAP (Drg No FD-67(M), FD-104,FD/E6/MAP/18, FD-104(M) &1031) |
| 30 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 31 | (b) S&F new shelves rest all as per item No 5.01. |
| 32 | (c) S&F new legs rest all as per item No 5.01. |
| 33 | (d) S&F new locking device rest all as per item No 5.01. |
| 34 | (e) S&F new Chromium Plated steel handle rest all as per item No 5.01. |
| 35 | (f) S&F new six lever lock with duplicate keys of Make - Link/Godrej/Harrison rest all as per item No 5.01.. |
| 36 | (g) S&F new cleats rest all as per item No 5.01.. |
| 37 | Repair to Almirah Med Steel (Drg No FD-1032) |
| 38 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 39 | (b) S&F new shelves, rest all as per item No 6.01. |
| 40 | (c) S&F new legs, rest all as per item No 6.01. |
| 41 | (d) S&F new locking device rest all as per item No 6.01. |
| 42 | (e) S&F new Chromium Plated steel handle rest all as per item No 6.01. |
| 43 | (f) S&F new six lever lock with duplicate keys of Make - Link/Godrej/Harrison rest all as per item No 6.01.. |
| 44 | (g) S&F new cleats rest all as per item No 6.01.. |
| 45 | Repairs to Table Office Clerk Steel (Drg No FD-84(M) & 1004) |
| 46 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 47 | (b) S&F new drawers, rest all as per Item No 7.01. |
| 48 | (c) S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked), rest all as per item No 7.01. |
| 49 | (d) S&F new six lever lock with duplicate keys, rest all as per item No 7.01. |
| 50 | REPAIR TO TABLE 900MM X 600MM X 760MM WITH DRAWER/WITHOUT DRAWER STEEL (Drg No FD-1008 & FD-1007 ) |
| 51 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 52 | (a) S&F new top of 18 mm thick prelaminated particle board as per drawing and specificatoin rest all as per item No 8.01. |
| 53 | (b) M&L for gas welding to broken joints of table Steel all as specified . |
| 54 | (c) S & F new six lever locks with Duplicate key, rest all as per item No 8.01. |
| 55 | Repairs to Bed Hard Steel/Charpoy IP Hard Top (Drg No FD/E6/MAP/8® & FD/MAP/II/01) |
| 56 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, rest all as specified and directed by Engineer-in-Charge.(a) S&F new ply wood 12 mm thick, BWR grade, ISI marked including fixing with suitable size screw & cup washer complete over a coat of synthetic enamel paint all as shown on drg and specified. |
| 57 | S&F in repair, MS steel long rail of existing size 1830x38x1.5mm holo pipe, rest all as per item No 9.01. ( Each long rail shall be measured as a single unit). |
| 58 | S&F in repair, MS steel short rail of existing size 930x38x1.5mm holo pipe, rest all as per item No 9.01. ( Each short rail shall be measured as a single unit). |
| 59 | S&F new head rest of 18 mm thick prelaminated particle board, rest all as per item No 9.01. |
| 60 | S&F new foot rest of 18 mm thick prelaminated particle board, rest all as per item No 9.01. |
| 61 | M&L for retightening of loose components, welding,replacement of old nuts & bolts, rest all as per item No 9.01. |
| 62 | Repair to Chair School with hand board ( Drg No FD/E6/MAP/05 ) |
| 63 | S&F in replacement of Hand board of 18 mm thick prelaminated particle board exterior grade mellamine faced veneered both side decorated (ISI Marked), including 4mm thick teak wood beading all round, fixed to frame with suitable 12 Nos nuts, bolts & washer complete all as specified on drg and directed. |
| 64 | S&F in replacement of polypropelene (Seat & Back) set complete all as specified and directed. |
| 65 | REPAIR TO TABLE STAINLESS STEEL TOP 167X760X957 MM (FD NO -1012) |
| 66 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 67 | (b) S&F new top, rest all as per item No 11.01. |
| 68 | (c) M&L for Gas welding to broken joints of table steel all as specified and directed. |
| 69 | (d) S&F new leg as per drawing and item No 11.01. |
| 70 | REPAIR TO CHAIR REVOLVING With/ Without Arms & Computer Chair TP & FD/E6/MAP/01 |
| 71 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, rest all as specified and directed by Engineer-in-Charge. |
| 72 | (a) S & F new hand rest |
| 73 | (c) S & F new back, rest all as per item No 12.01.. |
| 74 | (c) S & F new seat with PVC lipping alround , rest all as per item No 12.01.. |
| 75 | (c) S & F new pedestal assy and hydrolic pump, rest all as per item No 12.01.. |
| 76 | (b) Preparation of old painted surface of chair revolving and applying one coat of synthetic enamel paint by spray with black enameled colour all as directed. |
| 77 | REPAIR TO TABLE COMPUTER (DRG NO : FD/E6/MAP/03 |
| 78 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge.(A) S&F 18mm thick MDF board , exterior grade, prelaminated on both side with decorative lamination of same colour & texture for top/bottom/keyboard/partition/any other portion of Table computer. |
| 79 | (c) S & F Stainless steel Telescopic rolling channel for key board/mouse tray/drawer of Table computer of makes/ Models of Dumro,Godrej,Nilkamal,Durian, rest all as per item No 13.01. |
| 80 | (d) S & F 100 mm long MS chromium plated handle of computer table, rest all as per item No 13.01. |
| 81 | REPAIR TO FORM WITH BACK/ WITHOUT BACK (Drg No FD-77 7 78) |
| 82 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU)/Painting (synthetic enamel paint) one coat over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 83 | (a) S&F, seat made out of 1st class hard wood (Sal/Teakwood) of size 1800mm x 300 mm x 40/50 mm rest all as per item No 14.01 |
| 84 | (b) S&F, back rest made out of 1st class hard wood (Sal/Teakwood) of size 1800mm x 150mm x 25 mm rest all as per item No 14.01 |
| 85 | (c) M&L for Welding to broken joints, rest all as per item No 14.01. |
| 86 | (d) S&F new square/round MS pipe 1.6mm thick rest all as per item No 14.01. |
| 87 | REPAIR TO BED SIDE LOCKER STEEL (DRG NO FD-1029) |
| 88 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 89 | (b) S&F new shelves made out of 1mm thick MS sheet, rest all as per item No 15.01. |
| 90 | (c) S&F new legs made out 1.00 mm thick MS sheet, rest all as per item No 15.01. |
| 91 | (e) S&F new Chromium Plated steel hasp and staple, rest all as per item No 15.01. |
| 92 | REPAIR TO TABLE BED SIDE (Drg No. FD/E6/MAP/15(R) |
| 93 | aking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and painting one coat of synthetic enamel paint over one coat of red oxide to a new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 94 | (a) S&F new MS 18mm size square pipe of 18 Gauge thick, length n.exc 600mm each part for various parts. |
| 95 | (b) S&F new handles for drawer 75mm long mild steel chromium plated rest all as per item No 16.01.. |
| 96 | (c) S&F new sides with 18 mm thick Pre lamineted particle board, rest all as per item No 16.01.. |
| 97 | (d) S&F new top with 18 mm thick Pre lamineted particle board, rest all as per item No 16.01.. |
| 98 | (e) S&F new drawer all as per drg & directed. |
| 99 | (c) S & F Stainless steel Telescopic rolling channel for Table of makes/ Models of Dumro, Godrej,Nilkamal,Durian, rest all as per item No 16.01.. |
| 100 | Repair to Charpoy IP folding (FD-388 & FD 388(R)) |
| 101 | (a) Removing of old unserviceable charpoy top and S & F new top of 8-9mm thick plywood BWR grade (ISI Marked ) with appropriate size nuts,bolts & washer including thightening the loose components complete all as specified in drg and directed. |
| 102 | (b) Removing of old unserviceable members of charpoy folding and S & F new members of 25 mm dia 2 mm thck MS condute fixed with gas welding as specified & shown in drg. |
| 103 | (c) M & L for preparation of old painted steel surfaces by scraping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in drg and directed. |
| 104 | Repairs to Teapoy Varandah (Drg No FD-35(M), FD- 295, D-255, FD-383) |
| 105 | (a) M&L for spot welding to broken joints of MS member of teapoy verandah all as specified and directed |
| 106 | (b) Removing old u/s tops from Teapoy varandah and S&F new top made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) both side white with teak wood beading all around all as specified in drg & as directed . |
| 107 | (c) M&L for one coat of synthetic enamal white paint to Teapoy Varandah after preparation of old painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed . |
| 108 | Repair to Chair Dinning (Drg No. FD-203, 226, 228, 279, 353 & 354) FD/E6/MAP-II/05 |
| 109 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 110 | (a) S&F new rear leg |
| 111 | (b) S&F new front leg, rest all as per item No 1.01. |
| 112 | (c) S&F new stifner, rest all as per item No 1.01 |
| 113 | (d) S&F new front/side/rear rail, rest all as per item No 1.01. |
| 114 | (e) S&F new back rest, rest all as per item No 1.01. |
| 115 | (f) S&F new PVC seat of 4mm thick, including fixture, and fixing of one stiffner support in the centre of 25x25 mm, rest all as per item No 1.01 |
| 116 | (h) Re-caning of Chairs with 2mm wide & 0.4mm thick half round plastic cane except border which shall be 3.5mm(Minimum) wide & 0.6mm thick, frest all as per item No 1.01. |
| 117 | Repairs to Chair Easy (Drg No. FD-229, 17M, 201) |
| 118 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 119 | (a) S&F new rear leg. |
| 120 | (b) S&F new front leg, rest all as per item No 2.01. |
| 121 | (c) S&F new front/side/rear rail, rest all as per item No 2.01. |
| 122 | (d) S&F new top/bottom/side rail, rest all as per item No 2.01. |
| 123 | (e) S&F new arm, rest all as per item No 2.01. |
| 124 | (h) Re-caning of Chairs with 2mm wide & 0.4mm thick half round plastic cane except border which shall be 3.5mm(Minimum) wide & 0.6mm thick, frest all as per item No 2.01. |
| 125 | Repairs to Teapoy Wooden (Drg No. FD-382, 232, 34M, 278) |
| 126 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 127 | (a) S&F new top |
| 128 | (b) S&F new leg, rest all as per item No 3.01. |
| 129 | (c) S&F front/rear rail, rest all as per item No 3.01. |
| 130 | (d) S&F new bottom rail, rest all as per item No 3.01. |
| 131 | REPAIR TO TABLE 900 MM x 600 MM x 760 (WITH/WITHOUT DRAWER) (Drg No. FD-41, 42(M) & 224, FD-228,279, 16M, 203,55,223 & 284) |
| 132 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 133 | (a) S&F new top |
| 134 | (b) S&F new leg, rest all as per item No 4.01. |
| 135 | (c) S&F new long rail, rest all as per item No 4.01. |
| 136 | (d) S&F new short rail, rest all as per item No 4.01. |
| 137 | (e) S&F new middle stiffner, rest all as per item No 4.01. |
| 138 | (f) S&F new side stiffner, rest all as per item No 4.01. |
| 139 | (g) S&F new drawer, rest all as per item No 4.01. |
| 140 | REPAIR TO SOFA SET (Drg No. FD-281, FD-373) |
| 141 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 142 | (a) S&F new arm |
| 143 | (b) S&F, new leg of sofa set single or 3 seater, rest all as per item No 5.01. |
| 144 | (c) M&L for removing old unservicable cushion of sofa set and S&F, new cushion of 100mm thick foam, 40 density, size 530mm x 500mm for seat and back of Sofa Set 4/5 Seater, covered with superior quality tapestry cloth including stitching in size etc complete all as shown on drawing and as directed. |
| 145 | Repairs to Table 900 x 900 x 760 mm (Drg No. FD-88M, 288 & 291, 1014, 94 (M)) |
| 146 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 147 | (a) S&F new top |
| 148 | (b) S&F new marble top as per drawing and item No 6.01. |
| 149 | (c) S&F new rails, rest all as per item No 6.01. |
| 150 | (d) S&F new leg, rest all as per item No 6.01. |
| 151 | REPAIR TO TABLE DINING 6 PERSONS/ 8 PERSONS (Drg No. FD-272, 273, 376 & FD/E6/MAP-II/03) |
| 152 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 153 | (a) S&F new top |
| 154 | (b) S&F new long rail, rest all as pe item No 7.01. |
| 155 | (c) S&F new top side rail, rest all as pe item No 7.01. |
| 156 | (d) S&F new top side short rail, rest all as pe item No 7.01. |
| 157 | (e) S&F new leg, rest all as per item no 7.01. |
| 158 | REPAIR TO TABLE CENTRE (Drg No. FD-235, 375 & 274) |
| 159 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 160 | (a) S&F new top |
| 161 | (b) S&F new top of toughened black glass of size 900x600x12 mm of make Modiguard/Gobain with fixture, rest all as per item No 8.01. |
| 162 | (b) S&F new leg, rest all as per item no 8.01. |
| 163 | (c) S&F new top long rail, rest all as per item No 8.01.. |
| 164 | (d) S&F new top short rail, rest all as per item No 8.01. |
| 165 | (e) S&F new side stiffner,rest all as per item No 8.01. |
| 166 | (f) S&F new middle stiffner, rest all as per item No 8.01. |
| 167 | REPAIR TO CHAIR DINING WITH CUSHION (Drg No. FD/E6/MAP-II/04 |
| 168 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 169 | (a) S&F new rear leg. |
| 170 | (b) S&F new front leg, rest all as per item No 9.01. |
| 171 | (c) S&F new stifner, rest all as per item No 9.01 |
| 172 | (d) S&F new front/side/rear rail, rest all as per item No 9.01. |
| 173 | (e) S&F new back rest, rest all as per item No 9.01. |
| 174 | (f) S&F new seat made out of 75mm thick, 40 denisity, rest all as per item No 9.01. |
| 175 | REPAIR TO TABLE DRESSING LADIES WITH MIRROR (Drg No. FD-235,274 & FD/E6/MAP-II/07) |
| 176 | (a) M&L for removing old unservicable top and S&F, new top made out of prelaminated particle board 18mm thick exterior grade (ISI marked), with one side melamine face and balancing white on other side complete all as specified & shown in drg. |
| 177 | (b) M&L for removing old unservicable back of table and S&F, new back of table made out of 12mm thick, commercial, BWR grade ply wood complete all as specified and shown on drawing. |
| 178 | (c) M&L for removing old unservicable side and partition and S&F, new side and partition made out of prelaminated particle board 12mm thick exterior grade (ISI marked), with one side melamine face and balancing white on other side complete all as specified & shown in drg. |
| 179 | (d) M&L for removing old unservicable bottom ply wood of drawers of table and S&F, new bottom ply wood of drawers of table made out of 6mm thick, commercial, BWR grade ply wood complete all as specified and shown on drawing. |
| 180 | (e) M&L for removing old looking mirror of table and S&F, new looking mirror of 5.5mm thick with teak wood frame and with 6mm thick, commercial, BWR grade ply wood at back complete all as specified and shown on drawing. |
| 181 | (f) M&L for removing old unservicable aluminum channel and S&F, new aluminum channel having two 'U' shaped channels for sliding of plain glass of 5mm thick complete all as specified & shown in drg. |
| 182 | (g) M&L for removing old unservicable/broken sliding glass shutter and S&F, new plain, sliding glass, 5mm thick shutter complete all as specified and as shown in drawing . |
| 183 | (h) M&L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing two coat of wooden polish to old and new surface of table dressing ladies all as specified and directed. |
| 184 | Repairs to Table writing (Drg No. FD-33, FD-249 & FD- 275) |
| 185 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 186 | (a) S&F new top. |
| 187 | (b) S&F new front side of drawer, rest all as per item No 11.01. |
| 188 | (c) S&F new bottom of drawer, rest all as per item No 11.01. |
| 189 | (d) S&F, new door made out of prelaminated particle board 18mm thick exterior grade (ISI marked), rest all as per item No 11.01. |
| 190 | (e) S&F new back, rest all as per item No 11.01. |
| 191 | (f) S&F new side, rest all as per item No 11.01. |
| 192 | (g) S&F new leg, rest all as per item No 11.01. |
| 193 | REPAIR TO Peg Table (Drg No. FD-266, FD-277, FD-384, 25M) |
| 194 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 195 | (a) S&F new top. |
| 196 | (b) S&F new leg, rest all as per item No 14.01. |
| 197 | (c) S&F new front and rear rail, rest all as per item No 14.01. |
| 198 | REPAIR TO BIN LINEN MULTIPURPOSE (Drg No. FD/E6/MAP/09) |
| 199 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 200 | (a) S&F new double leaf door |
| 201 | (b) S&F, new front side of drawer, rest all as per item No 13.01. |
| 202 | (c) S&F new bottom of drawer, rest all as per item No 13.01. |
| 203 | (d) S&F, new teak wood side & rear rail, rest all as per item No 13.01. |
| 204 | (e) S&F new back of side board, rest all as per item No 13.01. |
| 205 | (f) S&F new top, rest all as per item No 13.01. |
| 206 | (g) S&F new back of side board, rest all as per item No 13.01. |
| 207 | (h) S&F new leg, rest all as per item No 13.01. |
| 208 | (j) S&F new chromium plated knob all as specified & shown in drg. |
| 209 | REPAIR TO TABLE DRESSING GENTS WITH MIRROR (Drg No. FD-230,31M & FD/E6/MAP/16) |
| 210 | Taking out unserviceable components without damaging the serviceable components, Supply and Fix New components as per drawing and also matching with existing components, including sanding, rubbing, putty and Polishing (Melamine/PU) as per drawing to the new part of on full item after repairs all as specified and directed by Engineer-in-Charge. |
| 211 | (a) S&F new back |
| 212 | (b) S&F new top, rest all as per item No 10.01. |
| 213 | (c) S&F new bottom, rest all as per item No 10.01. |
| 214 | (d) S&F new side and partition, rest all as per item No 10.01. |
| 215 | (e) S&F new electro copper plated mirror totally free from distoration of 1100x550x5.5mm thick with teak wood frame of 25x25mm and with 6mm thick, commercial, BWR grade ply wood, rest all as per item No 10.01. |
| 216 | Repairs to Chair Writing (Drg No. FD-280, 20M, 202, 250) |
| 217 | (a) M&L for removing of old broken rear leg of chair writing and S&F new rear leg made out of maching with existing wood type, size, shape in appropriate quality wood of similar size complete duly painted with maching to exsiting paint and colour all as specified & shown in drg. |
| 218 | (b) M&L for removing of old broken front leg of chair writing and S&F new front leg made out of maching with existing wood type, size, shape in appropriate quality wood of similar size complete duly painted with maching to exsiting paint and colour all as specified & shown in drg. |
| 219 | (c) M&L for removing of old broken stifner of chair writing and S&F new stifner made out of first class hard wood (teak wood) of similar size & shape complete duly painted with maching to exsiting paint and colour all as specified & shown in drg. |
| 220 | (d) M&L for removing of old broken front/side/rear rail of chair writing and S&F new front/side/rear rail made out ofmaching with existing wood type, size, shape in appropriate quality wood of similar size complete all as specified & shown in drg. |
| 221 | (e) M&L for removing of old broken arms of chair writing and S&F new arm made out of maching with existing wood type, size, shape in appropriate quality wood of similar size complete duly painted with maching to exsiting paint and colour all as specified & shown in drg. |
| 222 | (f) M&L for removing of old broken back rest of chair writing and S&F new back rest made out of maching with existing wood type, size, shape in appropriate quality wood of similar size complete duly painted with maching to exsiting paint and colour all as specified & shown in drg. |
| 223 | (g) M&L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing two coat of french polish to old and new surface of chair writting all as specified and directed. |
| 224 | (h) Re-caning of Chairs with 2mm wide & 0.4mm thick half round plastic cane except border which shall be 3.5mm(Minimum) wide & 0.6mm thick, flat superior quality cream/ white colour and weaving in accordance to Godrej Pattern as shown on drawing including removing unserviceable plastic cane all as specified and directed. Please Enable Macros to View BoQ information |
