|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 861EWS Name of Work : REPAIR TO PATHWAY, SEWAGE LINES, HARDSTANDING DRAINAGE, VIEW CUTTER AT VARIOUS LOCATIONS AND COMPREHENSIVE MAINT INCLUDING B/R & E/M REPAIRS OF CERTAIN TEMP / PERMT BLDGS AT VARIOUS LOCATIONS UNDER AGE B/R (P) OF GE 861 EWS. Contract No: GE 861 EWS-81(T)/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SerNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With TaxesRs. P TOTAL AMOUNT In Words |
| 2 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including roof covering etc complete all as specified and directed by Engineer-in-Charge. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area as directed by Engineer-in-Charge compete all as specified and as directed by Engineer-in-charge. |
| 4 | Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level with and including removing rubbish material from building and thrown in low lying empty area as compete all as specified and as directed by Engineer-in-charge. |
| 6 | Dismantling wall and ceiling boards (fiber, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame etc, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Dismantling of timber framed work as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking down cement or cement lime plaster from brick wall or concrete surfaces etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge |
| 9 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over with and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engineer-in-charge. |
| 12 | Material & Labour for Machine cut kota slab 20mm - 25 mm thick ( Kota stone as approved by Engineer-in-charge) as in flooring , laid and jointed with grey cement slurry @ 3.00 Kg per Sqm mixed with pigment to match the shade of the slab including rubbing and polishing , laid over with and including 15 mm thick screed bed in Cement Mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for 100 mm thick PCC 1:4:8 ,Type-D2 ,using 40mm graded stone aggregates as in sub base of flooring complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and Labour for 75 mm thick PCC 1:3:6 , Type C2 using 40 mm graded stone aggregate as plinth protection,Hard standing, Pavements , sub base of flooring finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 15 | Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and Labour for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work on wall complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and Labour for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and labour for Rendering 10mm thick in Cement Mortar 1:4 , on fair faces of brick work or concrete surfaces of walls, finish even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material and labour for Rendering 15mm thick in Cement Mortar 1:4 , on fair faces of brick work or concrete surfaces of walls, finish even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material and labour for preparation of newly plastered surface and applying three coats of white wash on wall complete all as specified and as directed by Engineer-in-charge. |
| 21 | Material and labour for preparation of new surface of wall, with and including and applying two coats of cement base paint over with and including one coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and labour for complete removing of existing treatment of old surface of walls, preparation of surface and and applying two coats of cement base paint over with and including one coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge. |
| 23 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in-charge. |
| 24 | Supply & Fixing second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply and Fixing Factory made 35mm thick framed, panelled shutter (two panel) with lock rail made of 2nd class Hard wood and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge. Note: Butt Hinges, Tower bolts, Handles , sliding door bolts and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. |
| 26 | Material & Labour for preparation of newly wooden surfaces of any description not otherwise described over 10cm width or girth , with and including applying two coats of synthetic enamel paint over with and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply and Fixing 200mm long aluminium anodised barrel tower bolts of extruded section (ISI Marked) complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & Fixing aluminium alloy anodised sliding door bolt 250mm of length with hasp, staple (bolt type) (ISI Marked )and fixing clips of sheets cast or extruded section and fixing bolt and sliding bolts complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply and Fixing Butt hinges size of 100mm , medium weight cold rolled mild steel (ISI Marked) complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and Fixing Mild steel 300mm size ordinary rat tail pattern springs (ISI Marked) including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and Fixing 150 mm long Extruded aluminium alloy handles, fabricated type,anodised (ISI Marked) complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fixing in replacement 15mm bore bib tap cast copper alloy, chromium plated, fancy type (ISI marked) with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and Fixing in replacement Vitreous china wash hand basin, Vitreous china white, flat back, size of 630mm x 450 mm with Mild steel brackets, with and including cutting for and pinning in ends of brackets or erecting stand, with and including waste fittings of brass chromium plated ,with and including 32mm dia PVC waste pipe of required length complete all as specified and directed. as directed by Engineer-in-Charge. |
| 34 | Supply and Fixing in replacement PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle , with and including brackets, with and including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and Fixing in replacement vitreous china wash down water closet pan (pedestal pattern ) white , with and including stainless steel Jet , with and including ‘P’ or ‘S’ trap , with and including seat cover complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and Fixing in replacement 15mm bore Pillar tap fancy type Chromium Plated , (ISI marked) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fixing in replacement 15 mm bore brass Chromium Plated mixer (ISI marked) for mixing hot and cold water, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge. |
| 38 | Demolition of brick work / stone masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in-charge. |
| 39 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground compete all as specified and as directed by Engineer-in-charge. |
| 40 | Dismantling wire mesh, any type complete all as specified and directed by Engineer-in-Charge. |
| 41 | Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Supply & Fixing Mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-In-Charge. |
| 43 | Material & Labour for PCC 1:3:6, Type C2, using 40mm graded stone aggregates as in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Material & Labour for PCC 1:3:6, Type C2, using 40mm graded stone aggregates as in surface chanel and drains complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, strainingbolts, etc. including provission of binding wire complete all as specified and as directed by Engineer-in-Charge. Note : The rate of binding wire is included in this item and nothing shall be paid extra on this account |
| 46 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed by Engineer-in-Charge. Note: The weight of chain link fencing shall be ascertained through BOO as ordered by GE and the payment shall be measured and paid accordingly. The copy of BOO duly countere signed by GE shall be enclosed with RAR / Final bill before progressing for considering release the payment to contractor. |
| 47 | Material & Labour for Chequered cement concrete tiles 20cm x 20cm / 30cm x 30cm x 25mm thick ( as approved by GE ), set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and with and including 15mm thick Screed bed or bedding layer of mortar 1:4 for laying floor finishes omplete all as specified and as directed by Engineer-in-Charge. |
| 48 | Material & Labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over with land including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material & Labour for complete removal of existing treatment old decorated plastered surface of wall , prepration of surface and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 50 | Material & Labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 52 | Material & Labour for 100mm thick plain cement concrete 1:2:4,Type B2 ,using 40mm graded stone aggregates as in sub base of floor complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Material and labour Plain cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregates as in coping complete all as specified and as directed by Engineer-in-charge. |
| 54 | Material & Labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Material and labour Flush pointing to brick walls with cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Taking down carefully aluminum / copper point wiring on Teak Wood Batten / in conduit / with conduit / in casing and capping(light /Fan / socket or power) complete with and including taking down fittings such as switches, ceiling roses, pendants, Regulators, sockets, light fittings etc complete all as specified and directed by Engineer-in-Charge. Notes:(i) The weight of aluminium scrap, copper scrap and scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item nos.56.00 to 57.00 of BoQ. |
| 57 | Material and labour for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with 1.5 Sqmm two single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked , with and including PVC casing and capping of medium grade of suitable size and run on wall / surface with all fittings (ISI Marked) with and including one single core 1.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) (as in green colour) as continues earth wire connected to earth dolly etc. controlled by one switch for one light point/ fan point with and including CI/MS/ wooden sunk box of required size with and including 3mm thick plastic laminated sheet cover & as directed by Engineer- in- Charge including cutting, chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engineer-in-Charge. Notes for serial item nos.56.00 to 57.00 : (i) switches one way 5 /6 Amp , switches one way 15 /16 Amp, socket out lets 5 /6 Amp & socket out lets 15 1/6 Amp shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. |
| 58 | All as per srl item No 56.00 of BoQ here-in-before but 2.5 Sqmm two single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable 1100 volt grade ISI Marked with and including one single core 2.5 Sqmm FRLSH PVC insulated multi strand copper conductor cable 1100 volt grade (ISI marked ) as continues earth wire connected to earth dolly etc for 3 pin socket outlet 15 Amps with complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply & fixing Switch piano flush type, 05/06 Amps single pole, one way 240V complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & fixing Switch socket combination 2 in 1, 3 pin, 5/15 Amp flush type universal 240V complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & fixing of Ceiling rose, 3 phase/PVC/poly carbonate isolated body complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and Fixing in replacement exhaust fan 450 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply and fix in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engineer-in-Charge. |
| 64 | Material and Labour Sub main wiring with two single core of size 4.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked , with and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) , drawn in , with and including one single core of size 4.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. Notes:-(a) Cost of PVC casing and capping medium grade of suitable size , fittings and earth wire included in sub main wiring. (b) Three single core 4.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and Cost of PVC casing and capping medium grade of suitable size and fittings shall be measured as one length. |
| 65 | Material and Labour Sub main wiring with two single core of size 6.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked , with and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) , drawn in , with and including one single core of size 6.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. Notes:-(a) Cost of PVC casing and capping medium grade of suitable size , fittings and earth wire included in sub main wiring. (b) Three single core 6.0 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade ISI Marked with and Cost of PVC casing and capping medium grade of suitable size and fittings shall be measured as one length. |
| 66 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
