|
| 1 | Removing Of Aluminum/Wooden Partition with frames and stacking the materials For covered in this section contractor should includes all type of scaffolding for all hights, removing and carting scrap material in the Port scrap yard or as directed by engineer in charge. The work should be carried out strictly with safety and at most care so that no damage will occur while during the work. Item to include necessary labour , tool & tackles , scaffolding , cleaning etc complete. The dismantled material will be Port property.Any disposal out side Admin Buidling primises should be in a proper manner so as not to be a nuisance, as well as in accordance with the laws laid down by the local authorities. as directed with all leads, lifts etc. complete. |
| 2 | Providing and applying Antimicrobial pearl/ luster / Satin finish paint of approved colour and shade over punned / puuty finish etc. complete. |
| 3 | Providing and fixing in place, table of size 1550mm x 675mm (worktop size)comprising of 25mm thick table top with side credenza of size 900mm x 750mm x 300mm deep having shutters with locks . The table top to have post.form edge. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. |
| 4 | Pedestal Unit @ 420Lx450Dx650HT Providing &Fixing of PEDESTAL @420Lx450Dx650HT:-To be made out of Complete Membrane consist of three Drawers as per drawing. |
| 5 | Staff's chair W560xD560xH900mm Providing & supplying Officer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm gas lift, Adjustable seat height and tilt tension, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent) |
| 6 | Visitor's chair W560xD560xH1000mm Providing & supplying visitor chair finished with leather mesh fabric, Fixed PP armrest, with Metal frame, seat filled with foam, with nylon buffers. Powder coating base etc complete as approved by the Engineer in charge etc. all complete. |
| 7 | Providing and fixing Half height Alu framed partition made out of 2\\"x2\\" alu box section covered with 12mm commercial ply from both side & finished with Laminates & polished TW beading frame supported from flooring. |
| 8 | Providing and laying Vitrified tiles having size 60 cm. x 60 cm / 60 cm to 120 cm. confirming to corresponding I.S. for dado and skirting in Toilets and required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry/ grouting cleaning curing etc. complete. |
| 9 | Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune(BevelledTegular) Edge Tiles of size15mm Exposed Grid.The tiles should have Humidity Resistance(RH) of99% ,NRC0.5, Light Reflectance 85% ,Thermal Conductivity k=0.052-0.057 w/m K, Colour White ,Fire Performance UK Class 0/ Class 1 (BS476pt-6&7) inmodule size of 600x600x16mm, with Recycled content of 35%. The tile shall be laid on precoated G.I.channel height 32 with 15mm wideT-section flanges colour white having rotary stitching and XL2CLI Ponall Tsectionsi .e.the Main Runner,1200mm and 600mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.57 Kilograms / M2 and pull out stength of minimum 100 Kilograms..The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carrya 10year warranty .approved as per GRIHA and BS476 etc.complete. |
| 10 | P&F 45-60 cm deep cupboard type storage unit made out of 19mm thick Commercial plywood of the requisite manufacture i.e. Anchor/Century/Kenwood/ Duro/Jet or equivalent generally confirming to I.S. 303 for frames, internal verticles horizontal divisions, shutters and 6mm & 12mm thick Commercial plywood with necessary locks, handles, hardware, lipping & beading patti (BTC) etc. The total shall be finished with formica laminate sheet in approved pattern with grooves etc. and two coats of french polish with antitermite treatment to plywood including all leads & lifts etc. complete. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge. |
| 11 | sub main Power Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles. |
| 12 | Supplying, installing, testing and commissioning of a consisting of modular , 2 Nos of 6A 5-pin sockets and 1no 16A SP switch along with front plate. The rate should include supplying & interconnecting PVC insulated 2Rx2.5sq.mm copper FRLS conductor wires for phase &1Rx2.5sq.mm. for earthing copper FRLS conductor wires and suitable switch box for switch and sockets. The whole cluster shall be measured as one number. (Make- Legrand or Equivalent ) |
| 13 | Description Same as Above Item - Looping from Primary point. ( Consider As a Secondary Point) (Make- Legrand- or Equivalent ) |
| 14 | Supplying, installing, testing and commissioning of a consisting of modular , 1 Nos of 6A 5-pin sockets and 1no 6A SP switch along with front plate. The rate should include supplying & interconnecting PVC insulated 2Rx2.5sq.mm copper FRLS conductor wires for phase &1Rx2.5sq.mm. for earthing copper FRLS conductor wires and suitable switch box for switch and sockets. The whole cluster shall be measured as one number. (Make- Legrand or Equivalent ) |
| 15 | Description Same as Above Item - Looping from Primary point. ( Consider As a Secondary Point) (Make- Legrand or Equivalent ) |
| 16 | Dimolition wall for window opening |
| 17 | Supply & Installation of dormakaba ALT 100 DGU Door Frames with Stile Door frame 100mm x 45mm for Single Leaf Swing door of size 800 x 2400mm. Hardware as below. FLUSH HINGE 127x78x3mm, Narrow Stile Lever Handle, Narrow Stile sash Lock, EPC,TS 70 OPEN slide channel door closer with hold open unit, Door Stopper,Concealed Drop Seal below door, |
| 18 | Cabin Table: Providing and making Cabin Table of size 2100mm (L) x 900mm (W) x 750mm (H) using approved quality materials as per design and drawing. |
| 19 | Side Storage: Providing and making Side Storage Unit of size 900mm (L) x 450mm (D) x 750mm (H) using approved quality materials as per design and drawing. |
| 20 | Drawer Pedastal : Providing and making Drawer Pedestal Unit with 3 drawers of standard size (approx. 400mm (W) x 450mm (D) x 600–650mm (H)) using approved quality materials as per design and drawing. |
| 21 | Providing & fixing Frosted Film for glass partitions with approved shade & colour. |
| 22 | Providing and fixing full height solid partition with wooden framework of size 50mm x 38mm with 600mm c/c made out of salwood treated with antitermite solution, 12 mm thick plywood of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.303 / I.S. 710- 1980 finished with 1mm thk laminate from both sides, having 3\\" wide skirting with 4mm thk groove between skirting and partition, with all necessary beads, moulding and lipping, GI fastenings etc. complete. |
| 23 | Removing Existing Glass Door & Refixing after Completion of partition work. |
| 24 | Cutting and finishing of Existing partition for door opening Please Enable Macros to View BoQ information |
