|
| 1 | FLOWMORE make Spares for Pumps requirments: RGTPP, Ramgarh |
| 2 | Vertical Turbine Intake Water Pump figure-7000, size-15M, Stage-Two, Drawing No. CSD-73304122K4(B) |
| 3 | TOP SHAFT |
| 4 | WATER SLINGER |
| 5 | PACKING GLAND (SPLIT TYPE) |
| 6 | PACKING BOX |
| 7 | TOP SHAFT SLEEVE |
| 8 | LINE SHAFT BEARING |
| 9 | LINE SHAFT SLEEVE |
| 10 | LINE SHAFT |
| 11 | DISCHARGE CASE BEARING |
| 12 | BOWL BUSH |
| 13 | IMPELLER LOCK COLLET |
| 14 | BRG. INTERBOWL |
| 15 | PUMP SHAFT |
| 16 | BEARING SUCTION |
| 17 | SPARE OF THRUST STAND ASSY AS PER DRG TSA/733 04 11 2K4(B) |
| 18 | L.B.T. OIL INDICATOR |
| 19 | OIL CUP WITH WICK |
| 20 | RATCHET PIN |
| 21 | HX HD BOLT |
| 22 | NYLOCK NUT |
| 23 | RUBBER BUSH |
| 24 | HX HD BOLT |
| 25 | LOWER COUPLING HALF |
| 26 | UPER COUPLING HALF |
| 27 | GIB KEY |
| 28 | THRUST BEARING HOUSING |
| 29 | FLOWMORE make Spares for Pumps requirments: CTPP-O&M, Chhabra |
| 30 | Flowmore Make pump installed at Water DRAIN SUMP PUMP at CHP |
| 31 | Water DRAIN SUMP PUMP, Fig: 5614 AWS , Size- 50x32 (Sl. No.: 87602042K8C, Capacity: 5 m³/hr.TDH 20mt.Pump input 1.02 Kw,Speed 1450 RPM) |
| 32 | Strainer |
| 33 | Impeller (Semi Open design) |
| 34 | Pressure Reducing bush |
| 35 | Shaft Sleeve |
| 36 | Pump shaft |
| 37 | Pump shaft Coupling |
| 38 | Line shaft |
| 39 | Top Shaft |
| 40 | Col.Brg.housing |
| 41 | Col.Brg.Bushing |
| 42 | Impller Key |
| 43 | IMP.Nut |
| 44 | Wearing Ring casing top |
| 45 | RACHET PIN |
| 46 | Water DRAIN SUMP PUMP, Fig:5615AWS SO (Sl. No.: 15802022K9, Size: 64x40, Capacity: 15 m³/hr.TDH 30mt.Pump input 3.09 Kw,Speed 1450 RPM) |
| 47 | Strainer |
| 48 | Impeller |
| 49 | Pressure Reducing bush |
| 50 | Pump shaft |
| 51 | Col.Brg. Bushing |
| 52 | Col.Brg.housing |
| 53 | Line shaft |
| 54 | Top Shaft |
| 55 | Pump shaft Coupling |
| 56 | Shaft Sleeve |
| 57 | Impller Key |
| 58 | IMP.Nut (Nylock) |
| 59 | RACHET PIN |
| 60 | Flowmore Make pump installed at packaged Central air-conditioning system |
| 61 | Spares for Condenser water pumps of TG Building Phase-I and Service building & Administrative building of stage -I, Make-flowmore Pvt. Ltd. ,Type-HES, Figure-5625, Size 125x100 (5''X4''), Pump Sr. No. 89303052K8C , 89302052K8C, & 89301052 K8C . |
| 62 | WATER SEAL RING |
| 63 | SHAFT SLEEVE |
| 64 | WATER SLINGER |
| 65 | FRAME/BEARING HOUSING |
| 66 | BEARING SPACER (Outer) |
| 67 | BEARING SPACER (Inner) |
| 68 | BEARING COVER (D.E.) |
| 69 | BRG. LOCK NUT |
| 70 | BRG. LOCK WASHER |
| 71 | DOWEL PIN (Sleeve to Shaft) |
| 72 | Flowmore Make pump installed at AHP |
| 73 | SPARES FOR HORIZENTAL END SUCTION PUMP FIG-K5523, SIZE-150x125 (6”x5”), Stage-single, LUB – GREASE as per Drg. No. CSD-694 02 10 2K7 |
| 74 | WEARING RING CASING |
| 75 | IMPELLER NUT (NYLOCK) |
| 76 | WATER SEAL RING |
| 77 | SHAFT SLEEVE |
| 78 | GLAND ASSY |
| 79 | BEARING COVER |
| 80 | FRAME/BEARING HOUSING |
| 81 | PUMP SHAFT |
| 82 | BACK HEAD / BACK COVER |
| 83 | CASING (VOLUTE) |
| 84 | IMPELLER |
| 85 | SPARES FOR Horizonal End Suction Pump MODEL - FIG-5622, SIZE-65X40 (2-1/2\\" X 1-1/2\\") STAGE-SINGLE, LUBE -OIL, TYPE-HF6, Drg No. CSD-SALE 1000007940 |
| 86 | WEARING RING CASING (Front Side) |
| 87 | IMPELLER NUT |
| 88 | WEARING RING CASING (Back Side) |
| 89 | BACK COVER/BACK HEAD |
| 90 | WATER SEAL RING |
| 91 | PACKING PCS. |
| 92 | GLAND ASSY |
| 93 | SHAFT SLEEVE |
| 94 | BEARING COVER (N.D.E.) |
| 95 | FRAME/BEARING HOUSING |
| 96 | BEARING COVER (D.E.) |
| 97 | PUMP SHAFT |
| 98 | BRG. LOCK NUT |
| 99 | BRG. LOCK WASHER |
| 100 | Flowmore Make pump installed at ASH |
| 101 | HES, FIG- 5627, Size-200x150 (8'x6'), Capacity-310M³/hrs. T.D.H-30Mtr Sr. No.-100001031001, 100001031002, Speed-1485rpm, ASH Water Pump |
| 102 | Wearing Ring Casing (Front Side) |
| 103 | Wearing Ring Casing (Back Side) |
| 104 | Impeller |
| 105 | Water Seal Ring |
| 106 | Gland Assembly |
| 107 | Spacer (Outer) |
| 108 | Spacer (Inner) |
| 109 | BRG. Lock Nut |
| 110 | BRG. Lock Washer |
| 111 | Flowmore Make Vertical Sump Pump, Single Stage, Pump type-5412A AWS 4\\"X4\\" (100X100), Size-100x100 (4\\"x4\\"), Capacity-110M³/hrs. T.D.H-15 Mtr Sr. No.-19074172202, 19074172201, Speed-1460rpm, Water Pump ( 02Nos. Pumps) |
| 112 | Spares for Vertical sump pump |
| 113 | Strainer |
| 114 | Impeller |
| 115 | Pressure Reducing Bush |
| 116 | Shaft Sleeve |
| 117 | Brg. Bushing For Frame |
| 118 | Pump Shaft |
| 119 | Shaft Coupling (Pump) |
| 120 | Top Shaft |
| 121 | Brg. Bush (For Top Tube) |
| 122 | Shaft Coupling |
| 123 | Spares for thrust stand Assy. of above Vertical Sump Pump |
| 124 | Rubber Bush |
| 125 | Flowmore Make Pump installed at DMPlant & ETP |
| 126 | Caustic Unloading Pumps DM Plant-I, Model No.:5623-50x32, Discharge:10M³/hr, Head:10, Speed:1450rpm, Power: 1.6KW,Sr No.:59701072K7D/2072, DRG No.-CSD-597-02-07-2k7 (D) Rev-1, Total Qty.: 02 Nos. |
| 127 | Bearing Cover (NDE) |
| 128 | Bearing Cover (DE) |
| 129 | Pump Shaft |
| 130 | Shaft Sleeve |
| 131 | Bearing Lock Nut |
| 132 | Impeller Nut |
| 133 | Condensor Pit Pump Unit# 1, Model No.:5613 AWS-50x32, Discharge:10M³/hr, Head:50, Speed:2880rpm, Power: 3KW,Sr No.:31001092K9F, DRG No.-CSD-310-02-09-2K9 (F) Total Qty.: 02 Nos. |
| 134 | Back cover/ Back Head |
| 135 | Shaft Sleeve |
| 136 | Presuure Reducing Bush |
| 137 | Bearing Bushing |
| 138 | Brg. Bush (For Top Tube) |
| 139 | Col. Brg. Bushing |
| 140 | Wearing Ring Casing(Top) |
| 141 | Impeller nut |
| 142 | Lock Nut |
| 143 | Pump shaft |
| 144 | Line Shaft |
| 145 | Top Shaft |
| 146 | Chlorine Booster Pump Unit# 1&2 , Model No.:5625-80x50, Discharge:10M³/hr, Head:45, Speed:2850rpm, Power: 3.3KW,Sr No.:90902052K8, DRG No.-CSD-909-02-052k8 ,Total Qty.: 02 Nos. |
| 147 | Wearing Ring Casing (Front Side) |
| 148 | Back cover/ Back Head |
| 149 | Pump Shaft |
| 150 | Shaft Sleeve |
| 151 | Gland Assy. |
| 152 | Impeller nut |
| 153 | Bearing lock nut |
| 154 | Switch Yard Pit Pump Unit# 1&2, Model No.:5612 AWS-50x32, Discharge:10M³/hr, Head:35, Speed:2990rpm, Power: 2KW,Sr No.:31001092K9A/2092, 1001092K9A/2092 DRG No.-CSD-310-02-09-2K9 (A) Total Qty.: 04 Nos. |
| 155 | Wearing Ring Casing(Bottom) |
| 156 | Impeller |
| 157 | Shaft Sleeve |
| 158 | Presuure Reducing Bush |
| 159 | Bearing Bushing |
| 160 | Brg. Bush (For Top Tube) |
| 161 | Col. Brg. Bushing |
| 162 | Wearing Ring Casing(Top) |
| 163 | Impeller nut |
| 164 | Lock Nut |
| 165 | Pump shaft |
| 166 | Line Shaft |
| 167 | Top Shaft |
| 168 | Pump shaft Coupling |
| 169 | Intake River Water System Parvati, Bethali Pump House & Potable Water Pump (Plant & Colony) |
| 170 | Spares for Flowmore Make Horizontal centrifugal split Case type (single stage) Pump Model 5822, Size-400X350, Stage-Single, Drawing No. –CSD-766 03 01 2K8 (A), River Water |
| 171 | Shaft Collar (01Set.=02Nos.) |
| 172 | Gasket for shaft sleeve (01Set.=02Nos.) |
| 173 | Shaft sleeve (01Set.=02Nos.) |
| 174 | Pump Shaft |
| 175 | Packing Gland Assembly (01Set.=02Nos.) |
| 176 | Flow More Make Vertical Pump Model;- 21M, Pump Sr. No. 76603012K80, 76602012K80 &76601012K80, T.D.H .43mtr., Speed- 1485 RPM Stage ;- Single, capacity- 930 m3/hr, Speed-1485 RPM, Drg. No. CSD/766 03 01 2K8 (C), River Water Parvati River Pump House.(03Nos.) |
| 177 | Impeller Wearing Ring |
| 178 | Protecting Ring |
| 179 | Thrust Collar Half (For Imp.) |
| 180 | Line Shaft Sleeve (01Set=05Nos.) |
| 181 | Top shaft |
| 182 | Top shaft Sleeve |
| 183 | Pump Shaft / Impeller Shaft |
| 184 | Line Shaft (1 Set= 5 Nos.) |
| 185 | Muff Coupling |
| 186 | Sand Cap |
| 187 | Bowl Bush |
| 188 | Line Shaft Bearing (01Set=05Nos.) |
| 189 | Bearing Suction |
| 190 | Bearing Inter Bowl |
| 191 | Bearing Discharge Case |
| 192 | Packing Box Bush |
| 193 | Spares for Flowmore Make horizontal centrifugal vertical split type (single stage) Pump type-HES, FIG- 5625-Size-125X100/1, Stage, Capacity-120M³/hrs. T.D.H-35Mtr Sr. No.-11000799-10-01, 11000799-10-02, Speed-1560rpm, Pump Direction of Rotation-ANTI Clock wise Potable Water Pump (Colony). |
| 194 | Impeller Nut |
| 195 | Water Seal Ring |
| 196 | Gland Assembly |
| 197 | Bearing Lock Nut |
| 198 | Shaft Sleeve |
| 199 | Pump Shaft |
| 200 | Spares for Flowmore Make horizontal centrifugal vertical split type (single stage) Pump type-HES, FIG- 5623-Size-50X32/1, Stage, Capacity-10M³/hrs. T.D.H-45Mtr Sr. No.-100000793001, 100000793002, Speed-1850rpm, Pump Direction of Rotation-ANTI Clock wise Potable Water Pump Booster Pump Firing Floor (Plant). |
| 201 | Shaft Sleeve |
| 202 | Pump Shaft |
| 203 | Brg. Lock Nut |
| 204 | Impeller Nut |
| 205 | Water Seal Ring |
| 206 | Gland Assy. |
| 207 | FLOWMORE make Spares for Pumps requirments: KSTPS, Kota |
| 208 | CA circle |
| 209 | Drawing No.: CSD/I-4532, Fig.: 7000, Type: V.T. Pump Pump Description: Soft Water Pump Size: 13H, Stage: Four, Speed: 1460 RPM T.D.H.: 50 Mtrs., Capacity: 325 M3/Hr. |
| 210 | Connector Bearing |
| 211 | Shaft Coupling |
| 212 | Line Shaft Sleeve |
| 213 | Top Shaft Sleeve |
| 214 | Bearing Suction |
| 215 | Bearing Interbowl |
| 216 | Bearing Top Interbowl |
| 217 | Line Shaft Bearing |
| 218 | Packing Box Bush |
| 219 | Drawing No.: CSD/J-5085, Type: V.T. Pump Pump Description: BCW Drain Pump, Fig.: 7000 Size: 18M, Stage: Two, Speed: 1460 RPM Capacity: 600 M3/Hr., Total Head: 75 Mtrs. |
| 220 | Inter Bowl |
| 221 | Packing Box |
| 222 | Impeller |
| 223 | Thrust Hub (For Brg no. 29322) |
| 224 | Link Assembly Complete (Set) |
| 225 | Bearing Suction |
| 226 | Bearing Interbowl |
| 227 | Pump Shaft |
| 228 | Top Interbowl Bearing |
| 229 | Connector Bearing |
| 230 | Shaft Coupling |
| 231 | Protecting Ring for Impeller |
| 232 | Top Shaft Sleeve |
| 233 | Packing Box Bush |
| 234 | Top Shaft |
| 235 | Thrust Hub (For Brg no. 29324) |
| 236 | Mounting Cover (Ratchet Type) |
| 237 | Drawing No.: CSD/U-13994 (Rev-1), Type: V.T. Pump Pump Description: BCW Pump, Fig.: 7000 Size: 20 H, Stage: Three, Speed: 1485 RPM T.B.H.: 70.20 Mtrs., Capacity: 1100 M3/Hr., Pump Sr. No.: U-13991 to 94 |
| 238 | Pump Shaft 2-7/16\\" |
| 239 | Column Pipe 16\\" |
| 240 | Top Column Pipe 16\\" |
| 241 | Water Slinger Assembly |
| 242 | Top Shaft 2-3/16\\" (Head Shaft) |
| 243 | Line Shaft 2-3/16\\" |
| 244 | Discharge Case |
| 245 | Shaft Coupling (Threaded) |
| 246 | Packing Box |
| 247 | Packing Gland (Bronze) |
| 248 | Bowl Wearing Ring |
| 249 | Bearing Suction |
| 250 | Bearing Interbowl |
| 251 | Top Interbowl Bearing |
| 252 | Connector Bearing |
| 253 | Line Shaft Bearing |
| 254 | Packing Box Bush |
| 255 | Line Shaft Sleeve |
| 256 | Top Shaft Sleeve |
| 257 | Lantern Ring |
| 258 | Thrust Hub (For Brg no. 29416) |
| 259 | Drawing No.- CSD-SALE11000650 10 (Rev-1) Pump Description: Colony Potable Booster Pump Type-Horizontal End Suction, Model: 5625, Size: 125x100 , Stage: Single , Speed: 1460 RPM, Capacity: 120 M3/Hr., Head: 35 Mtrs. |
| 260 | Wearing Ring Casing (Front Side) |
| 261 | Dowel Pin |
| 262 | Wearing Ring Casing (Back Side) |
| 263 | Gland Half |
| 264 | Bearing Cover |
| 265 | Water Slinger |
| 266 | Wearing Ring Impeller (Front Side) |
| 267 | Dowel Pin (W/Ring to Impeller) |
| 268 | Wearing Ring Impeller (Back Side) |
| 269 | Impeller |
| 270 | Water Seal Ring |
| 271 | Shaft Sleeve |
| 272 | Dowel Pin (Sleeve to Shaft) |
| 273 | Pump Shaft |
| 274 | Drawing No. : CSD-29803052K2 (A) Type :HES Pump, Description : DM Close Cycle Water PumpFig: F5524, Size: 200X150, Stage: SingleCapacity: 500 M3/Hr., Efficiency: 84.5%, Speed: 1475 RPMHead: 45 Mtrs, Pump Input:72.5 KW |
| 275 | VOLUTE |
| 276 | PIPE PLUG |
| 277 | WEARING RING CASING |
| 278 | WEARING RING IMPELLER |
| 279 | IMPELLER |
| 280 | PIPE PLUG |
| 281 | FRAME EXTENSION |
| 282 | GREASE CUP WITH N.R.V. |
| 283 | SHAFT SLEEVE |
| 284 | GREASE RELAESE FITTING |
| 285 | INNER BEARING COVER |
| 286 | FRAME |
| 287 | PUMP SHAFT |
| 288 | THRUST BRG. COVER |
| 289 | BRG. LOCK WASHER |
| 290 | KEY (For Pump Half Coupling) |
| 291 | BRG. LOCK NUT |
| 292 | GREASE RELIEF FITTING |
| 293 | FRAME PEDASTAL |
| 294 | WATER SLINGER |
| 295 | PIPE PLUG |
| 296 | WATER SEAL RING |
| 297 | KEY (For Impeller) |
| 298 | IMPELLER WASHER |
| 299 | IMPELLER NUT (NYLOCK) |
| 300 | Drawing No. : CSD-29804052K2 (D) Type :Vertical Suspended Non Clog Pump, Description : Drain Sump PumpFig: 5412 AWS, Size: 2'X2', Stage: SingleCapacity: 25 M3/Hr., Efficiency: 65%, Speed: 1425 RPMHead: 15 Mtrs, Pump Input:1.57 KW (with Sp. Gr. 1.0) |
| 301 | STRAINER |
| 302 | SUCTION HEAD |
| 303 | PIPE PLUG |
| 304 | VOLUTE |
| 305 | IMPELLER |
| 306 | FRAME |
| 307 | PUMP SHAFT |
| 308 | BRG. BUSHING |
| 309 | TOP SHAFT |
| 310 | FLGD. TOP COL. PIPE |
| 311 | TOP TUBE BRG. HOUSING |
| 312 | THRUST BRG. HOUSING |
| 313 | MOUNTING COVER |
| 314 | RATCHET PIN |
| 315 | LOWER COUPLING HALF |
| 316 | ADJUSTING NUT |
| 317 | LOVE JOY COUPLING ASSY. |
| 318 | THRUST HUB |
| 319 | BRG. BUSH (For Top Tube) |
| 320 | LUB. ASSY. WITH OIL TANK |
| 321 | SHAFT COUPLING |
| 322 | SHAFT SLEEVE |
| 323 | PRESSURE REDUCING BUSH |
| 324 | IMPELLER KEY |
| 325 | NYLOCK NUT |
| 326 | DISCH. ELBOW |
| 327 | DISCH. PIPE |
| 328 | Drawing No.-CSD/298 02 05 2K2 (C), No of pumps- 02 Nos. Spares for Potable water pump(Colony Drinking), WPTP STG-II, Size: 14M, stage-4, Speed-1475RPM, Capacity: 260 m3/hr , Bowl Efficiency-84% Bowl, Bowl Head -75.08 Mtrs., Bowl Input- 63.29K.W. |
| 329 | Pump Shaft Dia 1 –15/16” |
| 330 | Bearing Interbowl |
| 331 | Impeller |
| 332 | Impeller Lock Collet |
| 333 | Bowl Bush |
| 334 | Discharge Case Bearing |
| 335 | Discharge Case |
| 336 | Column Pipe Dia 10 \\" |
| 337 | Shaft Coupling |
| 338 | Line Shaft Dia 1 –7/16” |
| 339 | Line Shaft Sleeve |
| 340 | Line Shaft Bearing |
| 341 | Top Column Pipe Dia 10\\" |
| 342 | Top Shaft Sleeve |
| 343 | Packing Box Bush |
| 344 | Packing Box |
| 345 | Top Shaft Dia 1 –7/16” |
| 346 | Companion Flange |
| 347 | Impeller Wearing Ring |
| 348 | Drawing No.-CSD/I-4503), No of pumps- 03 Nos. Spares for Filter Water Pump, model: 12 M, Stage-4, Capacity: 210 m3/hr, T.D.H. : 60 mtrs, FIG-7000, Speed-1460 RPM |
| 349 | Bearing Suction |
| 350 | Impeller |
| 351 | Bearing Interbowl |
| 352 | Bearing Top Interbowl |
| 353 | Pump Shaft Dia 1-11/16” |
| 354 | Column Pipe 8\\" Dia |
| 355 | Connector Bearing |
| 356 | Shaft Coupling |
| 357 | Line Shaft Bearing |
| 358 | Line Shaft Sleeve |
| 359 | Line Shaft Dia 1-3/16\\" |
| 360 | Packing Box |
| 361 | Packing Box Bush |
| 362 | Top Shaft Sleeve |
| 363 | Top Shaft Dia 1-3/16\\" |
| 364 | Water Slinger |
| 365 | Companion Flange (Col. Flange) |
| 366 | Top column Pipe 8\\" Dia |
| 367 | Drawing No.-CSD/I-4522), No of pumps- 02 Nos. Spares for Back Wash pump, model: 19 H, WPTP stage-1, Capacity: 960 m3/hr, T.D.H. : 15 mtrs, FIG-7000, Speed-1460 RPM |
| 368 | Bearing Suction |
| 369 | Brg. Top Interbowl |
| 370 | Pump shaft Dia 2-3/16” |
| 371 | Reducer 16”x14” |
| 372 | Connector Bearing |
| 373 | Shaft Coupling |
| 374 | Line Shaft Bearing |
| 375 | Line Shaft Sleeve |
| 376 | Line Shaft Dia 1-3/16” |
| 377 | Packing Box |
| 378 | Packing Box Bush |
| 379 | Top Shaft Sleeve |
| 380 | Top Shaft Dia 1-3/16” |
| 381 | Water Slinger |
| 382 | Top column Pipe 14” Dia |
| 383 | Column Pipe 14” Dia |
| 384 | Drawing No.: CSD/I-4512, Fig.: 7000, , No of pumps- 02 Nos. Type : V.T.Pump,Pump Description : Potable Pump WPTP stg-I Size : 14M, Stage : Four, Speed : 1460 RPMTDH: 75 Mtrs, Capacity: 260 M3/Hr. |
| 385 | Bearing Suction |
| 386 | Impeller |
| 387 | Bearing Interbowl |
| 388 | Bearing Top Interbowl |
| 389 | Pump Shaft Dia 1 –15/16” |
| 390 | Column Pipe 8\\" Dia. |
| 391 | Connector Bearing |
| 392 | Shaft Coupling |
| 393 | Column Pipe Coupling |
| 394 | Line Shaft Bearing |
| 395 | Line Shaft Sleeve |
| 396 | Line Shaft Dia 1-7/16\\" |
| 397 | Packing Box Bush |
| 398 | Top Shaft Sleeve |
| 399 | Top Shaft Dia 1-7/16\\" |
| 400 | Top Column Pipe 8\\" Dia. |
| 401 | AHP-Circle |
| 402 | HP PUMP MODEL NO.18M/ STAGE 3, DRG. No. CSD-I-4674, Serial No.: I 4674 |
| 403 | Inter Bowl |
| 404 | Pump Shaft |
| 405 | Reducer 14\\" X 10\\" |
| 406 | Packing Gland |
| 407 | LP PUMP MODEL NO. 14M/STAGE I, DRG. No. :- CSD-I-4683, Serial No.:- I 4683 |
| 408 | Reducer 10\\" X 8\\" |
| 409 | Suction Case |
| 410 | Top Column Pipe 8\\" Ø |
| 411 | Line Shaft |
| 412 | Packing Gland |
| 413 | Complete Pump & Motor Coupling Set |
| 414 | CMR PUMP MODEL NO. 14M/ STAGE 8, DRG. No. :- CSD-I-4693, Serial No.:- I 4693 |
| 415 | Impeller |
| 416 | Column Pipe 8\\" |
| 417 | Reducer 10\\" X 8\\" |
| 418 | Packing Gland |
| 419 | Suction Case |
| 420 | Pump Shaft P. No. 12 |
| 421 | Complete Pump & Motor Coupling Set |
| 422 | FLOWMORE make Spares for Pumps requirments: KaTPP,Jhalawar |
| 423 | Water System |
| 424 | Filter Water Pump, Pump Model No.: 7000-10M/11 Stages, Sr. No. SALE-09000411101 CS Drg No. CSD-SALE09000411-10 (02 Nos.) |
| 425 | Motor Pump Coupling Set |
| 426 | Thrust Bearing Housing (TSA-1) |
| 427 | Oil Level Sight Window (TSA-5) |
| 428 | Thrust Hub (TSA-26) |
| 429 | Complete Bowl Assembly |
| 430 | Potable Water Pump, Pump Model No.: 7000-5M/10 Stages, Sr. No. SALE-09000411201 CS Drg. No. CSD-SALE09000411-20 (03 nos.) |
| 431 | Packing Gland |
| 432 | Shaft Coupling |
| 433 | Top Shaft Sleeve |
| 434 | Thrust Bearing Housing |
| 435 | Adjusting Nut |
| 436 | Thrust hub |
| 437 | Top Shaft |
| 438 | Line Shaft |
| 439 | RGF Backwash pump, Pump Model No.: 7000-15H/2 Stages Sr. No. SALE-09000411301 CS Drg. No.CSD-SALE09000411-30 (03 Nos.) |
| 440 | Top Shaft Sleeve |
| 441 | Adjusting Nut |
| 442 | Top shaft |
| 443 | Motor Pump Coupling (set) |
| 444 | DM Regenration Pump, Pump Model No.: 5622-50X32, Stage: Single, Sr. No. 0900004982001 CS Drg. No. CSD-SALE09000498-20 (02 Nos.) |
| 445 | Casing (Volute) |
| 446 | Bearing Lock Washer |
| 447 | Bearing Cover (DE) |
| 448 | Shaft sleeve |
| 449 | Impeller Nut |
| 450 | Impeller |
| 451 | Sludge Transfer Pump, Pump Model No.: 5413AWS-100X100, Stage: Single, Sr. No.100001311001 CS Drg No. CSD-SALE10000131-10 (02 Nos.) |
| 452 | Pump Shaft |
| 453 | Bearing Bushing |
| 454 | Line Shaft |
| 455 | Ratchet Pin |
| 456 | Bearing Bush (For Top Tube) |
| 457 | Volute (Casing) |
| 458 | Suction Bell |
| 459 | Flgd. Top Column Pipe |
| 460 | Flgd. Column Pipe |
| 461 | Col. Bearing Bushing |
| 462 | Col. Bearing Bushing |
| 463 | DMF Backwash Pump, Pump Model No.:5624-150X125, Stage: Single, Sr. No. 100001312002 CS Drg No. CSD-SALE10000131-20 (02 Nos.) |
| 464 | Impeller |
| 465 | Shaft Sleeve |
| 466 | Pump Shaft |
| 467 | ETP DMF Feed Pump, Pump Model No.: 5625-125X100, Stage: Single, Sr. No. 100001313001 CS Drg No. CSD-SALE10000131-30 (03 Nos.) |
| 468 | Casing (Volute) |
| 469 | Wearing Ring Casing (Front Side) |
| 470 | Impeller Nut |
| 471 | Impeller |
| 472 | Bearing Cover |
| 473 | Pump Shaft |
| 474 | River Water Intake Pumps, Pump Particulars (Figure- 7000, Model-24H, No. of Stage-2), Sr. No.10000346-10-01, Drg. No. CSD - SALE10000346-10 (03 Nos.) |
| 475 | Pump Shaft |
| 476 | Top Shaft |
| 477 | Top Shaft Sleeve |
| 478 | Bearing Suction |
| 479 | Bowl Bush |
| 480 | Adjusting Nut |
| 481 | AHP System |
| 482 | HP WATER PUMPS, TYPE- HORIZONTAL SPLIT CASE PUMP, FIG.5824, SIZE- 250X200, Stage: Single, SR. NO.- 090003893001 & 090003893002 DRG. NO.- CSD-SALE09000389 30 (02 Nos.) |
| 483 | Pump Shaft, SS-410 |
| 484 | Bearing Housing (in board) |
| 485 | Packing gland Assembly, CI (IS 210 FG 260) |
| 486 | Water Seal Ring, Broze (IS 318 LTB-II) |
| 487 | Cinch Fitting |
| 488 | Cover for bearing housing, CI (IS 210 FG 260) |
| 489 | Lock washer (For Bearing) |
| 490 | Bearing Housing (out board) |
| 491 | Impeller |
| 492 | Grease Release fitting |
| 493 | LP WATER PUMPS,TYPE:HORIZONTAL END SUCTION PUMP, FIG.5625,SIZE-200X150, Stage: Single, SRNO.- 090003891001, 090003891002 & 090003891003 DRG. NO.- CSD-SALE09000389 10 (03 |
| 494 | Pump Shaft |
| 495 | Impeller Nut |
| 496 | Wearing Ring casing back side |
| 497 | Water Seal Ring |
| 498 | Gland Assy. |
| 499 | Bearing Cover (NDE) |
| 500 | Bearing cover (DE) |
| 501 | Back cover/ back head |
| 502 | ASH WATER RECOVERY PUMP, TYPE.- HORIZONTAL END SUCTION PUMP, FIG.5626, SIZE- 200X150, Stage: Single, DRG. NO.- CSD-SALE10000146-10 (02 Nos.) |
| 503 | Wearing Ring casing front side |
| 504 | Impeller Nut |
| 505 | Stuffing Box Bushing |
| 506 | Bearing Cover NDE |
| 507 | Bearing Cover DE |
| 508 | Wearing Ring casing (Back side) |
| 509 | Dowel Pin (W/Ring to B. Cover) |
| 510 | Casing (Volute) |
| 511 | Impeller |
| 512 | Pump Shaft |
| 513 | SEAL WATER PUMP, TYPE.- HORIZONTAL END SUCTION PUMP, FIG.5624, SIZE- 50x32, Stage: Single, Sr.no.090003892001 & 090003892002 DRG. NO.- CSD-SALE09000389 20 (02 Nos.) |
| 514 | Impeller Nut |
| 515 | Water Seal Ring |
| 516 | Gland Assy. |
| 517 | Bearing Cover (NDE) |
| 518 | Bearing Cover (DE) |
| 519 | Pump Shaft |
| 520 | Oil Flinger |
| 521 | Impeller |
| 522 | Wearing Ring Casing (Back side) |
| 523 | Shaft Sleeve |
| 524 | FLOWMORE make Spares for Pumps requirments: STPS(O&M), Suratgarh |
| 525 | Intake Pump, Stage -II, CSD23104122K1(A),Qty =4 Nos.Fig: 7000, Size: 24HX, Stage: One |
| 526 | Suction Brg PART NO 2 |
| 527 | Strainer PART NO 3 |
| 528 | Bowl Bush PART NO 12 |
| 529 | Brg Inter bowl PART NO 13 |
| 530 | Brg Discharge Case PART NO 16 |
| 531 | Pump Shaft PART NO 19 |
| 532 | Shaft Coupling PART NO 20 |
| 533 | Line Shaft PART NO 22 |
| 534 | Line Shaft Sleeve PART NO 23 |
| 535 | Brg Retainer PART NO 24 |
| 536 | Line Shaft Brg PART NO 25 |
| 537 | Top Shaft PART NO 29 |
| 538 | Top Shaft Sleeve PART NO 30 |
| 539 | Packing Box Bush PART NO 31 |
| 540 | Packing Box PART NO 34 |
| 541 | Water Slinger Assy. PART NO 37 |
| 542 | Thrust bStand Assy. PART NO 39 |
| 543 | Impeller Wearing Ring PART NO 50 |
| 544 | Bowl Wearing Ring PART NO 51 |
| 545 | Thrust coller Half PART NO 58 |
| 546 | Ptotector Ring For impeller PART NO 59 |
| 547 | L.B.T. oil Indicator PART NO 29 |
| 548 | Complete Set of fastners |
| 549 | Intake Pump,Stage -IV,CSD/ 606 02 07 2K7(A), Qty. 2Nos.Fig: 7000, Size: 20H, Stage: Single |
| 550 | Brg Suction 05 |
| 551 | Sand cap 07 |
| 552 | Pump Shaft 08 |
| 553 | Brg InterBowl 09 |
| 554 | Impeller lock collet 12 |
| 555 | Bowl Bush 13 |
| 556 | Discharge Case Brg 16 |
| 557 | Pump Shaft Coupling 21 |
| 558 | Line shaft (bottom) 22 |
| 559 | Line shaft sleeve 23 |
| 560 | Line shaft Brg 24 |
| 561 | Brg Retainer 25 |
| 562 | Top shaft sleeve 31 |
| 563 | Packing Box Bush 32 |
| 564 | Water slinger Assy. 37 |
| 565 | Adjusting Nut 39 |
| 566 | Top Shaft 40 |
| 567 | Thrust Stand Assy. 42 |
| 568 | Water Seal Ring 47 |
| 569 | Line Shaft Coupling 52 |
| 570 | Line shaft 53 |
| 571 | Wearing Ring Bowl 55 |
| 572 | L.B.T.Indicator 29 |
| 573 | Complete Set of fastners |
| 574 | Plant Drinking ,Stage-I,CSD/219 01 05 2K9,Qty=1Nos.Fig: 7000, Size: 7M, Stage: 15 |
| 575 | Suction Bearing -Drg. CSD/21901052K9, (Part No.:-02) |
| 576 | Inter Bowl -Drg. CSD/21901052K9, (Part No.:-06) |
| 577 | Impeller -Drg. CSD/21901052K9, (Part No.:-07) |
| 578 | Impeller Collet -Drg. CSD/21901052K9, (Part No.:-08) |
| 579 | Brg Inter Bowl -Drg. CSD/21901052K9, (Part No.:-09) |
| 580 | Pump Shaft -Drg. CSD/21901052K9, (Part No.:-10) |
| 581 | Brg Discharge Case -Drg. CSD/21901052K9, (Part No.:-12) |
| 582 | Shaft Coupling -Drg. CSD/21901052K9, (Part No.:-15) |
| 583 | Line Shaft -Drg. CSD/21901052K9, (Part No.:-17) |
| 584 | Line Shaft Sleeve -Drg. CSD/21901052K9, (Part No.:-18) |
| 585 | Line Shaft Bearing --Drg. CSD/21901052K9, (Part No.:-19) |
| 586 | Bearing Retainer -Drg. CSD/21901052K9, (Part No.:-20) |
| 587 | Top Shaft Sleeve --Drg. CSD/21901052K9, (Part No.:-26) |
| 588 | Packing Box Bush -Drg. CSD/21901052K9, (Part No.:-27) |
| 589 | Water Seal Ring -Drg. CSD/21901052K9, (Part No.:-31) |
| 590 | Ratchet Pin -Drg. TSA/21901052K9, (Part No.:-04) |
| 591 | Adjusting Mut -Drg. TSA/21901052K9, (Part No.:-06) |
| 592 | Retainering Washer -Drg. TSA/21901052K9, (Part No.:-07) |
| 593 | Nylock Nut -Drg. TSA/21901052K9, (Part No.:-11) |
| 594 | Upper Coupling Half -Drg. TSA/21901052K9, (Part No.:-13) |
| 595 | Pin Block -Drg. TSA/21901052K9, (Part No.:-14) |
| 596 | Rubber Bush -Drg. TSA/21901052K9, (Part No.:-15) |
| 597 | Link -Drg. TSA/21901052K9, (Part No.:-16) |
| 598 | Lower Coupling Half -Drg. TSA/21901052K9, (Part No.:-17) |
| 599 | Thrust Hub-Drg. TSA/21901052K9, (Part No.:-19) |
| 600 | Mounting Cover -Drg. TSA/21901052K9, (Part No.:-20) |
| 601 | Dowel Pin -Drg. TSA/21901052K9, (Part No.:-22) |
| 602 | Thrust Bearing Housing -Drg. TSA/21901052K9, (Part No.:-24) |
| 603 | Shaft Coller -Drg. TSA/21901052K9, (Part No.:-27) |
| 604 | Top Shaft Part No.43 |
| 605 | Plant Drinking ,Stage II,CSD/2K 11 02 046,7M/15Stg,Qty=2 Nos. |
| 606 | Brearing Suction PART NO 3 |
| 607 | Bearing Interbowl PART NO 6 |
| 608 | Impeller collect PART NO 7 |
| 609 | Interbowl PART NO 8 |
| 610 | Impeller PART NO 9 |
| 611 | Pump Shaft PART NO 10 |
| 612 | Discharge Case Bearing PART NO 12 |
| 613 | Shaft Coupling PART NO 16 |
| 614 | Top shaft PART NO 21 |
| 615 | Packing Box PART NO 23 |
| 616 | Packing Box Bush PART NO 24 |
| 617 | Water Slinger PART NO 27 |
| 618 | Mounting Cover PART NO 31 |
| 619 | Thrust Hub PART NO 32 |
| 620 | Lower coupling Half PART NO 33 |
| 621 | Gib key PART NO 34 |
| 622 | Adjusting nut PART NO 35 |
| 623 | Straight key PART NO 39 |
| 624 | Ratchet pin PART NO 40 |
| 625 | Thrust Bearing Housing PART NO 43 |
| 626 | Line shaft sleeve PART NO 51 |
| 627 | Bearing retainer PART NO 52 |
| 628 | Line shaft bearing PART NO 53 |
| 629 | Line shaft PART NO 54 |
| 630 | Bowl Wearing ring PART NO 65 |
| 631 | Impeller wearing ring PART NO 66 |
| 632 | Colony Drinking Pump at STPS Colony ,CSD/324 02 06 97,Qty=4Nos.Fig: 7000, Size: 11M, Stage: Three |
| 633 | Impeller wearing Ring 01(CSD/324020697) |
| 634 | suction Brg 06 |
| 635 | Inter Bowl 09 |
| 636 | Impeller Collect 10 |
| 637 | Bearing Inter Bowl 11 |
| 638 | Impeller 12 |
| 639 | Pump Shaft 17 |
| 640 | Discharge Case Bearing 22 |
| 641 | Shaft coupling 23 |
| 642 | Line Shaft Bearing 24 |
| 643 | Line Shaft 25 |
| 644 | Top shafts Sleeve32 |
| 645 | Packing Box Bush 33 |
| 646 | Packing Box34 |
| 647 | Water slinger Assembly 38 |
| 648 | Thrust stand Assy.39 |
| 649 | Top Shaft 41 |
| 650 | Bearing Retainer 53 |
| 651 | Line Shaft Sleeve 51 |
| 652 | Drawing No. (TSA/324020697) |
| 653 | Gib Key03 (TSA/324020697) |
| 654 | Adjusting Nut 04 |
| 655 | Retaining Washer 05 |
| 656 | Nylock Nut 08 |
| 657 | Upper Coupling Half 10 |
| 658 | Pin Block 11 |
| 659 | Rubber Bush 12 |
| 660 | Link 13 |
| 661 | Lower Coupling Half14 |
| 662 | Straight Key 15 |
| 663 | Thrust Hub 16 |
| 664 | Ratchet Pin 17 |
| 665 | Mounting Cover 18 |
| 666 | dowel Pin 20 |
| 667 | Thrust brg Housing 22 |
| 668 | Ash Water Pump Stage-IV,CSD/606 02 07 2K7(C) Qty. = 02 Nos.Fig: 7000, Size: 18M, Stage: Single |
| 669 | Brg Suction 05 |
| 670 | pump Shaft 08 |
| 671 | Brg InterBowl 09 |
| 672 | Impeller lock collet 12 |
| 673 | Bowl Bush 13 |
| 674 | Discharge Case Brg 16 |
| 675 | Pump Shaft Coupling 21 |
| 676 | Line shaft (bottom) 22 |
| 677 | Line shaft sleeve 23 |
| 678 | Line shaft Brg 24 |
| 679 | Brg Retainer 25 |
| 680 | Top shaft sleeve 31 |
| 681 | Packing Box Bush 32 |
| 682 | Water slinger Assy. 37 |
| 683 | Adjusting Nut 39 |
| 684 | Top Shaft 40 |
| 685 | Water Seal Ring 47 |
| 686 | Line Shaft Coupling 52 |
| 687 | Line shaft 53 |
| 688 | Wearing Ring Bowl 55 |
| 689 | Clarifer Water Supply Pump Stage-IV,Qty. = 02 Nos.Fig: 7000, Size: 21H, Stage: Single, Drg. No.: CSD/60602072K7(B) |
| 690 | Pipe plug 01(Drg CSD/60602072K7(B) |
| 691 | Brg Suction 05 |
| 692 | Sand cap 07 |
| 693 | Pump Shaft 08 |
| 694 | Brg InterBowl 09 |
| 695 | Impeller lock collet 12 |
| 696 | Bowl Bush 13 |
| 697 | Discharge Case Brg 16 |
| 698 | Pump Shaft Coupling 21 |
| 699 | Line shaft (bottom) 22 |
| 700 | Line shaft sleeve 23 |
| 701 | Line shaft Brg 24 |
| 702 | Brg Retainer 25 |
| 703 | Top shaft sleeve 31 |
| 704 | Packing Box Bush 32 |
| 705 | Water slinger Assy. 37 |
| 706 | Adjusting Nut 39 |
| 707 | Top Shaft 40 |
| 708 | Water Seal Ring 47 |
| 709 | Line Shaft Coupling 52 |
| 710 | Line shaft 53 |
| 711 | Wearing Ring Bowl 55 |
| 712 | TBH/TSA Spares ,Drawing No. TSA/60602072K7 (B) |
| 713 | Thrust Brg Seat 03 |
| 714 | Thrust Hub 09 |
| 715 | lower Coupling Half 10 |
| 716 | Retainer Washer 12 |
| 717 | Pin Block 13 |
| 718 | Rubber Bush 14 |
| 719 | upper coupling half 17 |
| 720 | Link 20 |
| 721 | Ratchet Pin 24 |
| 722 | Oil retainer sleeve 28 |
| 723 | DMCCW PUMP Stg-II,Qty.=6 Nos |
| 724 | Impeller shaft FlowmorePart No. 18 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 725 | Nut(For shaft sleeve) FlowmorePart No. 19 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 726 | Grub Screw FlowmorePart No. 29 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 727 | Lock Nut FlowmorePart No. 2 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 728 | Lock Washer Flowmore Part No. 3Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 729 | Water Deflector FlowmorePart No. 27Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 730 | Coupling Bolts & Rubber washer Flowmore Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 731 | Cap for Bearing housing Flowmore Part No. 20 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 732 | Cover for BRG. HSG.Flowmore Part No. 5 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 733 | water seal tube Flowmore Part No. 8 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 734 | Shaft coller Flowmore Part No. 25 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 735 | Seal ring Flowmore Part No. 34 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 736 | Seal cover Flowmore Part No. 41 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 737 | Grub Screw FlowmorePart No. 33 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 738 | Brg.housing (Out board) Flowmore Part No. 01 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 739 | Brg.housing (In board) Flowmore Part No. 23 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 740 | Set Collar Flowmore Part Nos 36 Pump Fig. 5822-350''x300''Drg. CSD-079 06 09 2K (F) |
| 741 | DMCCW PUMP Stg-IV,Qty.=3 Nos |
| 742 | Lock Washer (For Bearing) Part No. 37,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 743 | Shaft Sleeve Part No. 19,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 744 | Pump Shaft part no.40,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 745 | VERTICAL PIT PUMP Stg-I,Qty.=3 Nos |
| 746 | Impeller, part no-5,Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 747 | Pressure Reducing Bush Part No. 13 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 748 | Shaft Sleeve Part No. 14 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 749 | Pump Shaft Part No. 15 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 750 | Oil Seal Part No. 16 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 751 | Bearing Bushing Part No. 18 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 752 | Pump Shaft Coupling Part No. 20 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 753 | BRG. Bushing (Column BRG. Housing) Part No. 22 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 754 | Top Shaft Part No. 26 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 755 | Line Shaft Part No. 61 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 756 | Line Shaft Coupling Part No. 75 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 757 | Service Water Pump, Fig: 590, Size: 150X125, Stage: 3, Drawing No.: CSD-07903092KC |
| 758 | Discharge End Casing Part No.-16 |
| 759 | Shaft Part Number 25 |
| 760 | Shaft Sleeve (LH Thd.) Part Number 31 |
| 761 | Impeller Part Number 32 |
| 762 | Shaft Sleeve (RH Thd.) Part Number 37 |
| 763 | Suction End Casing Part No.-38 |
| 764 | Taper Sleeve Part No.-40 |
| 765 | Case Bushing Part Number 48 |
| 766 | Impeller Wear Rings Part No.-53 |
| 767 | W/Ring (Casing) Part No.-09 |
| 768 | BOILER FILL PUMP Stg-II,Qty.=2 Nos |
| 769 | Casing wearing ring flowmore part no.7 pump fig. 3FH (100x80) DRG-CSD-079 02 09 2K(A) |
| 770 | Pump shaft, flowmore part no.19 pump fig. 3FH (100x80) DRG-CSD-079 02 09 2K(A) |
| 771 | Coupling Bolt & Rubber Bush(1 set =6 Nos) |
| 772 | DMCCW MAKE UP PUMP Stg-II, Qty.=2 Nos |
| 773 | Wearing ring(Impeller) flowmore part no.03 pump fig-1-1/2FH(65x40) drg.CSD-079 0209 2K(E) |
| 774 | Casing Wearing ring flowmore part no.07 pump fig-1-1/2FH(65x40) drg.CSD-079 0209 2K(E) |
| 775 | Shaft sleeve flowmore part no.15 pump fig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E) |
| 776 | Shaft flowmore part no.19 pump fig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E) |
| 777 | Bearing housing(thrust) flowmore part no.20 pump fig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E) |
| 778 | Bearing cover (thrust) flowmore part no.21 pump fig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E) |
| 779 | Lock washer flowmore part no.22 pump fig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E) |
| 780 | Lock nut flowmore part no.23 pump fig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E) |
| 781 | Nut & Bolt for coupling Part No Nil fig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E)make flowmore |
| 782 | Coupling rubber bush Part No Nilfig-1-1/2FH (65x40) drg.CSD-079 0209 2K(E) make flowmore |
| 783 | CYCLE MAKE UP PUMP Stg-II,Qty.=4 Nos |
| 784 | Shaft Flowmore part no 25 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 785 | Shaft Sleeve(R H THD.) Flowmore part no 37 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 786 | Shaft Sleeve(L H THD.) Flowmore part no 31 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 787 | Ball Bearing cover Flowmore part no 1 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 788 | Wearing Ring Casing Flowmore part no 9 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 789 | Spacer Bushing Flowmore part no 12 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 790 | Shaft Collars Flowmore part no 20 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 791 | Shaft Slinger Flowmore part no 21 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 792 | Thrust Collar Flowmore part no 23 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 793 | Taper Sleeve Flowmore part no 40 pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 794 | Nut & Bolt for coupling(1 set=6 nos) Flowmore part no pump fig-590 (100x80) ,Drg-CSD-079 04 09 2K(B) |
| 795 | DMCCW PUMP Stg-IV,Qty.=3 Nos |
| 796 | Water deflector part no.24, Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 797 | Sleeve Nut (for sleeve ) (NDE) Part No. 23, Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 798 | Cover (for Bearing housing ) Part No. 26,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 799 | Bearing housing (out Board ) Part No.27,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 800 | Sleeve Nut (for sleeve ) (DE) Part No. 36, Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 801 | Lock Nut (For Bearing) Part No. 38,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 802 | Pump Shaft part no.40,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 803 | Coupling Bolts & Rubber washer part no.Nil ,Fig no 5822,350x300,make flowmore drg no CSD-605 03 07 2k7(F) |
| 804 | DMCCW PUMP Stg-IV,Qty.=2 Nos |
| 805 | Wearing ring Casing(front side) part no.02,fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 806 | Wearing ring Casing(Back side) part no.08, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 807 | Shaft sleeve part no.15, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 808 | Bearing cover(NDE) part no.17, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 809 | Oil seal(NDE) part no.18, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 810 | Bearing cover(DE) part no.22, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 811 | Frame/Bearing housing part no.20, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 812 | Oil seal(DE) part no.24, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 813 | Pump shaft part no.25, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 814 | Bearing Lock Nut part no.27, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 815 | Bearing Lock washer part no.28, fig no. 5622, 50x32 make flowmore drg.CSD-605 02 07 2K7(D) |
| 816 | Coupling for DMCCW Make Up pump, Part No Nil make flowmore |
| 817 | CYCLE MAKE UP PUMP Stg-IV,Qty.=2 Nos |
| 818 | Bearing spacer(Outer) part no 20 Fig no 5625,80x50 make flowmore drg no CSD-605 02 07 2K7( C ) |
| 819 | Bearing spacer(Inner) part no 21 Fig no 5625,80x50 make: flowmore drg no CSD-605 02 07 2K7( C ) |
| 820 | Bearing Lock Nut part no 26 Fig no 5625,80x50 make: flowmore drg no CSD-605 02 07 2K7( C ) |
| 821 | Bearing Lock Washer part no 27 Fig no 5625,80x50 make: flowmore drg no CSD-605 02 07 2K7( C ) |
| 822 | Frame/Bearing Housing part no 18 Fig no 5625,80x50 make: flowmore drg no CSD-605 02 07 2K7( C ) |
| 823 | Pump Shaft part no 24 Fig no 5625,80x50 make: flowmore drg no CSD-605 02 07 2K7( C ) |
| 824 | Bearing Cover(NDE) part no 15 Fig no 5625,80x50 make: flowmore drg no CSD-605 02 07 2K7( C ) |
| 825 | Bearing Cover(DE) part no 23 Fig no 5625,80x50 make: flowmore drg no CSD-605 02 07 2K7( C ) |
| 826 | VERTICAL PIT PUMP Stg-I,Qty.=3 Nos |
| 827 | Impeller, part no-5,Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 828 | Pressure Reducing Bush Part No. 13 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 829 | Shaft Sleeve Part No. 14 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 830 | Pump Shaft Part No. 15 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 831 | Oil Seal Part No. 16 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 832 | Bearing Bushing Part No. 18 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 833 | Pump Shaft Coupling Part No. 20 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 834 | BRG. Bushing (Column BRG. Housing) Part No. 22 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 835 | Top Shaft Part No. 26 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 836 | Line Shaft Part No. 61 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 837 | Line Shaft Coupling Part No. 75 Flowmore Vert.sump pump fig-5412 AWS 2\\"x2'',drg no-CSD 142 04 05 96( III) |
| 838 | VERTICAL PIT PUMP Stg-III,Qty.=2 NosFig: 5414 AWS, Size: 2-1/2\\", Stage: Single |
| 839 | Impeller, part no-7, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 840 | Nylock Nut, part no-3, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 841 | Oil seal, part no-10, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 842 | Pump Shaft, part no-11, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 843 | Bearing bushing, part no-12, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 844 | Top Shaft, part no-14, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 845 | Thrust Bearing housing, part no-21, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 846 | Bearing Bush(for Top Tube), part no-34, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 847 | Column Bearing Housing, part no-38, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 848 | Column Bearing Bushing, part no-39, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 849 | Line shaft, part no-40, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 850 | Shaft coupling, part no-42, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 851 | Shaft Sleeve, part no-43, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 852 | Pressure Reducing Bush, part no-44, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 853 | Casing Wearing Ring, part no-51, Make: Flowmore Model 5414 AWS Drg No CSD-231 O2 12 2K 1(B) |
| 854 | Service Water Pump Stg.-II,Qty.= 3 NosFig: 590, Size: 150X125, Stage: 3 |
| 855 | Discharge End Casing Part No.-16 |
| 856 | Shaft Part Number 25 |
| 857 | Shaft Sleeve (LH Thd.) Part Number 31 |
| 858 | Impeller Part Number 32 |
| 859 | Shaft Sleeve (RH Thd.) Part Number 37 |
| 860 | Suction End Casing Part No.-38 |
| 861 | Taper Sleeve Part No.-40 |
| 862 | Coupling Rubber Bush |
| 863 | Service Water Pump, U#6,Qty.= 2 NosFig: 5623, Size: 100X65, Single Stage |
| 864 | Casing Volute, Make-Flowmore, Type: Horizontal End Pump, Part No.-01, Ref.Drg.No. CSD-94402062K8(B) |
| 865 | Wear Ring Casing (Front Side), Make-Flowmore, Type: Horizontal End Pump, Part No.-02, Ref. Drg. No. CSD-94402062K8(B) |
| 866 | Impeller Nut, Make-Flowmore, Type: Horizontal End Pump, Part No.-04, Ref. Drg. No. CSD-94402062K8(B) |
| 867 | Impeller, Make-Flowmore, Type: Horizontal End Pump, Part No.-05, Ref. Drg. No. CSD-94402062K8(B) |
| 868 | Wearing Ring Casing (Back Side), Make-Flowmore, Type: Horizontal End Pump, Part No.-08, Fig :5623, Ref. Drg. No. CSD-94402062K8(B) |
| 869 | Shaft Sleeve , Make-Flowmore, Type: Horizontal End Pump, Part No.-15, Fig :5623, Ref. Drg. No. CSD-94402062K8(B) |
| 870 | Pump Shaft, Make-Flowmore, Type: Horizontal End Pump, Part No.-25, Fig :5623, Ref. Drg. No. CSD-94402062K8(B) |
| 871 | DM Transfer Pump, U#6,Qty.= 2 NosFig: 5623, Size: 65X40, Single Stage |
| 872 | Wearing Ring Casing (Back Side) Part No.-08 |
| 873 | Brg. Lock Nut Part No.-27 |
| 874 | Coupling Set (Flex Spacer Type Coupling) |
| 875 | Shaft Sleeve, Part No.-15 |
| 876 | Pump Shaft, Part No.-25 |
| 877 | Impeller, Part No.-05 |
| 878 | FLOWMORE make Spares for Pumps requirments: SSCTPS, Suratgarh |
| 879 | Horizontal end suction pump for AHP Compressor Cooling (Pump Model No.- F5524, Size-200x150) |
| 880 | Wearing Ring Casing |
| 881 | Impeller |
| 882 | Horizontal end suction pump for Main Silo compressor cooling (Pump Model No.- 5625, Size-65x40) |
| 883 | Wearing Ring Casing (Front Side) |
| 884 | Impeller |
| 885 | Wearing Ring Casing (Back Side) |
| 886 | Horizontal Centrifugal Water Pumps for Air Washer of Ventilation system of Main Plant(Pump Model No.- 5823, Size-150x125) |
| 887 | Water Seal Ring |
| 888 | Wearing Ring (For Casing) |
| 889 | FLOWMORE make Spares for Pumps requirments:CSCTPP, Chhabra |
| 890 | BAHP WATER PUMP Qty.-03 Nos. Drawing No. CSD-SALE15072256 10 Rev. 2 |
| 891 | Rotating assembly |
| 892 | Pump shaft |
| 893 | Bearing Bracket housing (D.E.) |
| 894 | Cover |
| 895 | Sleeve Nut (D.E.) |
| 896 | Collar Inter Stage |
| 897 | Bush Inter Stage |
| 898 | Upper Half Casing |
| 899 | Wearing Ring Casing |
| 900 | Shaft Sleeve |
| 901 | Water Seal Ring |
| 902 | Gland Half |
| 903 | Lock Washer For Bearing |
| 904 | Lock Nut For Bearing |
| 905 | Shaft Collar |
| 906 | Cover |
| 907 | Sleeve Nut (N.D.E.) |
| 908 | Lower Half Casing |
| 909 | Gasket(Teflon Bush) |
| 910 | Bearing Bracket(NDE) |
| 911 | ECO. WATER PUMP Qty.-03 Nos. Drawing No.CSD-SALE15072256 30 Rev. 1 |
| 912 | Rotating assembly |
| 913 | Bearing Housing(NDE) |
| 914 | Lock Nut For Bearing |
| 915 | Lock Washer For Bearing |
| 916 | Shaft Collar |
| 917 | Bearing Cover |
| 918 | Sleeve Nut & Lock Nut ( N.D.E.) |
| 919 | Wearing Ring Casing |
| 920 | Impeller (Ist Stage) |
| 921 | Impeller (2nd Stage) |
| 922 | Gasket (for Shaft Sleeve) |
| 923 | Shaft Sleeve |
| 924 | Stuffing Box Bushing |
| 925 | Water Seal Ring |
| 926 | Bearing Housing(DE) |
| 927 | Pump Shaft |
| 928 | Sleeve Nut & Lock Nut(D.E.) |
| 929 | Upper Half Casing |
| 930 | Lower Half Casing |
| 931 | Collar Inter Stage |
| 932 | Bush Inter Stage |
| 933 | BALP WATER PUMP Qty.-03 Nos. Drawing No.CSD-SALE15072256 20 Rev. 1 |
| 934 | Wearing Ring Casing (Front & Back Side) |
| 935 | Impeller Nut |
| 936 | Water Seal Ring |
| 937 | Shaft Sleeve |
| 938 | Pump Shaft |
| 939 | Impeller |
| 940 | Back Head/Back Cover |
| 941 | Bearing Lock Nut |
| 942 | Bearing Lock Washer |
| 943 | Water Slinger |
| 944 | FAHP WATER PUMP Qty.-03 Nos. Drawing No.CSD-SALE15072256 60 Rev. 1 |
| 945 | Wearing Ring Casing (Front Side) |
| 946 | Wearing Ring Casing(Back side) |
| 947 | Water Seal Ring |
| 948 | Shaft Sleeve |
| 949 | Impeller |
| 950 | Gland Half |
| 951 | Bearing Lock Nut |
| 952 | Bearing Lock Washer |
| 953 | Water Slinger |
| 954 | Impeller Nut |
| 955 | LP SEAL WATER PUMP QTY-02 NOS. Drawing No.CSD-SALE15072256 40 Rev. 1 |
| 956 | Wearing Ring Casing (Front Side) |
| 957 | Wearing Ring Casing (Back Side) |
| 958 | Back Head/Back Cover |
| 959 | Water Seal Ring |
| 960 | Shaft Sleeve |
| 961 | Pump Shaft |
| 962 | Impeller |
| 963 | Bearing Lock Nut |
| 964 | Bearing Lock Washer |
| 965 | Oil Flinger |
| 966 | Water Slinger |
| 967 | HP SEAL WATER PUMP QTY-02 NOS. Drawing No.CSD-SALE15072256 50 Rev. 2 |
| 968 | Wearing Ring Casing(Front side) |
| 969 | Wearing Ring Casing(Back side) |
| 970 | Water Seal Ring |
| 971 | Shaft Sleeve |
| 972 | Bearing Cover |
| 973 | Pump Shaft |
| 974 | Bearing Lock Nut |
| 975 | Bearing Lock Washer |
| 976 | Impeller |
| 977 | Oil Flinger |
| 978 | Water Slinger |
| 979 | DUST CONDITIONTER WATER PUMP QTY-03 NO Drawing No.CSD-SALE15072256 80 Rev. 2 |
| 980 | Shaft Collar |
| 981 | Wearing Ring Casing |
| 982 | Shaft Sleeve |
| 983 | Stuffing Box Bush |
| 984 | Packing Gland Assembly(2-2.5% NI. C.I. (IS- 210, FG-260) |
| 985 | Collar Inter Stage |
| 986 | Bush Inter Stage |
| 987 | Impeller (Stage-I) |
| 988 | Impeller (Stage-II) |
| 989 | BRG. LOCK NUT |
| 990 | BRG. LOCK WASHER |
| 991 | Sleeve nut (NDE) |
| 992 | Water Seal Ring |
| 993 | Cinch Fitting |
| 994 | Pump Shaft |
| 995 | Sleeve nut (DE) |
| 996 | COMP. COOLING WATER PUMP QTY-02 NO Drawing No.CSD-SALE15072256 90 Rev. 2 |
| 997 | Wearing Ring Casing (Front Side) |
| 998 | Impller Nut |
| 999 | Wearing Ring Casing (Back Side) |
| 1000 | Water Seal Ring |
| 1001 | Shaft Sleeve |
| 1002 | Gland Assembly (2-2.5% NI. C.I. (IS- 210, FG-260) |
| 1003 | RECYCLE WATER PUMP QTY-02 NO Drawing No.CSD-SALE15072256 70 Rev. 1 |
| 1004 | Water seal ring |
| 1005 | Stuffing Box Bushing |
| 1006 | Wearing ring(casing) |
| 1007 | Shaft sleeve |
| 1008 | Sleeve nut and lock nut (for sleeve) N.D.E. |
| 1009 | Gland Assembly (2-2.5% NI. C.I. (IS- 210, FG-260) |
| 1010 | Gasket (for Shaft Sleeve) |
| 1011 | Sleeve Nut & Lock Nut (for sleeve)( D.E.) Please Enable Macros to View BoQ information |
