|
| 1 | M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including rigid PVC conduit not less than 20mm bore, concealed/surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, junction boxes, tees, terminal boxes with and including factory made modular metal / pvc boxes as required at site including modular cover plates (white) with frame for mounting modular switches, including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, including taking down old u/s point wiring of any type with fittings, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate. |
| 2 | All as per Serial Item No. 01 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified. |
| 3 | All as per Serial Item No. 01 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified. |
| 4 | All as per Serial Item No. 01 here-in-before but for one light point controlled by two two way switchs, complete all as specified. |
| 5 | All as per Serial Item No. 01 here-in-before but for each additional light point on the same switch circuit, complete all as specified. |
| 6 | All as per Serial Item No. 01 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified. |
| 7 | M&L for Circuit / Sub main wiring with two run of 2.5Sqmm FRLS PVC insulated unsheathed multi stranded, copper conductor single core cable, 1100 Volt, and one run of FRLS copper earth wire 2.5Sqmm drawn through and including suitable size PVC Casing & Capping with fittings, including taking down old submain wiring of any type, complete all as specified. Note: Copper conductor cable 2 run and one run of copper earth wire along with one run PVC Casing & Capping shall be measured as one length. |
| 8 | All as per Serial Item No. 7 here- in-before but for two runs of 4.0Sqmm and one run of 4.0Sqmm as earth wire. |
| 9 | All as per Serial Item No. 7 here- in-before but for two runs of 6.0Sqmm and one run of 6.0Sqmm as earth wire. |
| 10 | M&L for Circuit / Sub main wiring with two runs of 6.0Sqmm PVC FRLS insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 6.0Sqmm as earth wire, drawn through existing conduit, concealed /surface type, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire shall be measured as one unit. |
| 11 | All as per Serial Item No. 10 here- in-before but for four runs of 6.0Sqmm and one run of 6.0Sqmm as earth wire. |
| 12 | S&F Switch piano flush type single pole one way 5/6Amp, 240 Volts, complete all as specified and as directed. |
| 13 | S&F Socket outlet 5/6 Amps, 3 and 5 pin multipurpose, flush type, 240 Volts, complete all as specified and as directed. |
| 14 | S&F Socket outlet 15/16 Amps, 3 and 5 pin, 5 and 15Amp multipurpose, flush type, 240 Volts, complete all as specified and as directed. |
| 15 | S&F Switch piano flush type single pole one way (multi pin) 15/16Amp, 240Volt, complete all as specified and as directed. |
| 16 | S&F BLDC Fan regulator, 240Volt, 120 watt electronic step & socket type regulator, for ceiling fan of any sweep, complete all as specified. |
| 17 | S&F Switch piano flush type 2 way switch 5/6Amp, 240 volts, complete all as specified and as directed. |
| 18 | S&F Bell push, 5Amp, 230Volt, white, complete all as specified. |
| 19 | S&F IN REPAIR PCB Assembly of BLDC fan of any make / Model and size of as per existing at site, complete all as specified. |
| 20 | S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed. |
| 21 | S&F IN REPAIR surface type Electrical PVC switch board 8\\"x6\\" for mounting switch, socket, fan regulatot etc complete all as specified and as directed. |
| 22 | S&F IN REPAIR surface type Electrical PVC switch board 6\\"x4\\" for mounting switch, socket, fan regulatot etc complete all as specified and as directed. |
| 23 | S&F IN REPAIR surface type Electrical PVC switch board 4\\"x4\\" for mounting switch, socket, fan regulatot etc complete all as specified and as directed. |
| 24 | Supply and fix in Call bell ding dong type 230 V AC circuit complete all as specified and as directed. |
| 25 | S&F IN REPAIR 10Amp Switch Socket Combined (SSC) with PVC Surface Gang Box, complete all as specified and directed . |
| 26 | S&F IN REPAIR 15Amp Switch Socket Combined (SSC) with PVC Surface Gang Box, complete all as specified and directed . |
| 27 | M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including rigid PVC Casing & Capping of suitable size fixed on wall/ceiling, with all accessories, junction boxes, tees, terminal boxes with and including factory made surface pvc boxes suitable for mounting modular / paino type switches & sockets etc, as required at site, covered with 3mm thick laminated plastic sheet ISI marked, including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, including taking down old u/s point wiring of any type with fittings, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate. |
| 28 | All as per Serial Item No. 27 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified. |
| 29 | All as per Serial Item No. 27 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified. |
| 30 | All as per Serial Item No. 27 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified. |
| 31 | S&F Modular Socket, 5/6A, 2/3 pin combined , 2 module, 240 Volts, complete all as specified and as directed. |
| 32 | S&F Modular Socket, 6A/16A, 2/3 pin combined multipurpose, 2 module, 240 Volts, complete all as specified and as directed. |
| 33 | S&F Modular switch 1 way 5/6A, 1 Module, 240 Volts, complete all as specified and as directed. |
| 34 | S&F Modular switch 1 way 15/16A, 1 Module, 240 Volts, complete all as specified and as directed. |
| 35 | S&F Modular BLDC Fan regulator, 240Volt, 120 watt electronic step & socket type regulator, 2 Module, for ceiling fan of any sweep, complete all as specified. |
| 36 | S&F Modular Switch 2 way 5/6A, 1 Module, 240 volts, complete all as specified and as directed. |
| 37 | S&F Modular Bell push, 5Amp, 230Volt, white, 1 Module, complete all as specified. |
| 38 | S&F IN REPAIR Modular white cover plate with frame & plastic box, 12 module, 230Volt, AC, Complete all as specified. |
| 39 | S&F IN REPAIR Modular white cover plate with frame & plastic box, 8 module, 230Volt, AC, Complete all as specified. |
| 40 | S&F IN REPAIR Modular white cover plate with frame & plastic box, 6 module, 230Volt, AC, Complete all as specified. |
| 41 | S&F IN REPAIR Modular white cover plate with frame & plastic box, 3 module, 230Volt, AC, Complete all as specified. |
| 42 | S&F IN REPAIR Modular white cover plate with frame & plastic box, 2 module, 230Volt, AC, Complete all as specified. |
| 43 | S&F IN REPAIR Modular Plastic surface box 12 module 230 Volts AC Complete all as specified. |
| 44 | S&F IN REPAIR Modular Plastic surface box 8 module 230 Volts AC Complete all as specified. |
| 45 | S&F IN REPAIR Modular Plastic surface box 6 module 230 Volts AC Complete all as specified. |
| 46 | S&F IN REPAIR Modular Plastic surface box 3 module 230 Volts AC Complete all as specified. |
| 47 | S&F IN REPAIR Modular Plastic surface box 2 module 230 Volts AC Complete all as specified. |
| 48 | S&F IN REPAIR of Three runs of 1.5 Sqmm FRLSH PVC insulated unsheathed copper wire, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn through existing conduit / Casing & Capping of concealed/surface type, as in repair to point wiring, with and including taking out old wiring of any type, complete all as specified and as directed. Note: Three runs of copper wire shall be measured as one unit. |
| 49 | S&F IN REPAIR of Three runs of 2.5 Sqmm FRLSH PVC insulated unsheathed copper wire, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn through existing conduit / Casing & Capping of concealed/surface type, as in repair to point wiring, with and including taking out old wiring of any type, complete all as specified and as directed. Note: Three runs of copper wire shall be measured as one unit. |
| 50 | M&L for Circuit / Sub main wiring with two runs of 4.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 4.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit. |
| 51 | All as per Serial Item No. 50 here- in-before but for two runs of 6.0Sqmm and one run of 6.0Sqmm as earth wire. |
| 52 | Disconnecting, taking down & removing carefully existing ceiling fan / exhaust fan / wall bracket fan / air circulating fan etc., from any position & any sweep for repair / servicing , dismantling & opening of fans, checking serviceability of parts, overhauling & cleaning, oiling & greasing, fixing back the serviceable parts in position, removing & replacement of defective / unserviceable parts if any with new parts, reassembling the fans, making necessary adjustment and alignment of blades, painting, refixing in position, connecting electric source and testing at site, complete all as directed by Engineer-in-Charge. Note: Replacement of defective / non functional parts shall be measured and paid seperately as \\"Supply Only\\" items under respective items. Fixing charges of new spares shall be deemed to be included under this item. |
| 53 | Supply only ball bearing No. 6200 to 6203. |
| 54 | Supply only capacitor 2.5mfd (PVC Body) |
| 55 | Supply only capacitor 3.15mfd (PVC Body) |
| 56 | Supply only complete hanging assembly set of ceiling fan with rubber reel, MS clamps, nuts & bolts with lock hole & pin and down rod, complete all as directed by Engineer-in-Charge. |
| 57 | S&F FRLSH PVC insulated sheathed, multi standard, copper conductor cable of size 2.0 core x 0.5Sqmm, 1100 volts grade and multi stranded 1100 Volt grade confirming to IS 694: 1977, for electric connection, complete all as specified and as directed. |
| 58 | S&F 15mm bore dia MS tube light grade down rod of 300mm long, duly finished with powder coating of white colour, including making necessary holes, threadings etc., complete all as specified. |
| 59 | S&F 15mm bore dia MS tube light grade down rod of 900mm long, duly finished with powder coating of white colour, including making necessary holes, threadings etc., complete all as specified. |
| 60 | Dismantling / opening the ceiling fan of any sweep (1200/1400mm) & make, rewinding motor with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing after reassembling the same & making good, complete all as specified. |
| 61 | Dismantling / opening the exhaust fan of 300mm sweep of any make, rewinding motor with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing after reassembling the same & making good, complete all as specified. |
| 62 | Dismantling / opening the exhaust fan of 225/250mm sweep of any make, rewinding motor with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing after reassembling the same & making good, complete all as specified. |
| 63 | Dismantling / opening the exhaust fan of 450mm sweep of any make, rewinding motor with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing after reassembling the same & making good, complete all as specified. |
| 64 | S&F Ceiling fan 30/35W copper coil winding complete with blades, down rod, 3 blade type, including electronic regulator step type and accessories, 230Volt, 1200mm sweep, minimum air delivery 210 CFM with service value 6.0BEE, with brushless direct current motor (BLDC), five star rating, including taking down existing u/s ceiling fan and depositing to AGE E/M Store yard, complete all as specified and as directed. |
| 65 | Dismantling / opening the exhaust fan of PVC 225/250 mm sweep Fresh Air Fan motor & any make, rewinding (copper) motor with super enamelled copper wire of appropriate gauge including replacement of insulating materials such as laminated lithoid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing after reassembling the same & making good, complete all as specified. |
| 66 | Dismantling / opening the exhaust fan of Metal Body 225/ 300mm sweep Fresh Air Fan motor & any make, rewinding (copper) motor with super enamelled copper wire of appropriate gauge including replacement of insulating materials such as laminated lithoid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. and testing after reassembling the same & making good, complete all as specified. |
| 67 | S&F Exhaust fan with sturdy engineering plastic body with louvers shutter, AC, single phase, 230Volt, 250mm sweep, 1200RPM, copper winding, with all accessories and necessary electrical connections, including taking down existing u/s exhaust fan and depositing to AGE E/M Store yard, complete all as specified and as directed. |
| 68 | S&F Exhaust fan, steel body, AC single phase, 230Volt, 300mm sweep, heavy duty with blades, frame, louvers, wiremesh with all accessories and necessary fixing details, including taking down existing u/s exhaust fan and depositing to AGE E/M Store yard, complete all as specified and as directed. |
| 69 | S&F IN REPAIR Factory made epoxy powder coated Sheet metal enclosure Vertical TPN DB, 4 ways (VTPN MCB DB)with IP 43 protection, double door, sheet steel phosphetised powder painted with 200 amps rated copper busbar 415Volt, fixed on sunmica with wall, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCCB’s/MCBs, complete all as specified and as directed. |
| 70 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), TPN, 415 volt, 4 Way(TPN MCB DB), double door, IP-42 protection with 200 Amp rated copper bus bar 415Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified. |
| 71 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 230 volt, 12 Way, double door, IP-42 protection with 200 Amp rated copper bus bar 230Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified. |
| 72 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 230 volt, 8 Way, double door, IP-42 protection with 200 Amp rated copper bus bar 230Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified. |
| 73 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 230 volt, 4 Way, double door, IP-42 protection with 200 Amp rated copper bus bar 230Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified. |
| 74 | S&F IN REPAIR Sheet metal clad SPN enclosure with a 2 pin and earth plug & socket type, with and including one single pole MCB 20Amp, SP, 10kA, C series, 240Volt with connections, complete all as specified and as directed. |
| 75 | S&F IN REPAIR MCCB TPN 100Amp, 16kA, 415Volt, 4 pole with necessary connecting and commissioning, complete all as specified and as directed. |
| 76 | S&F IN REPAIR MCCB TP 125Amp, 16kA, 415Volt, 3 pole with necessary connecting and commissioning, complete all as specified and as directed. |
| 77 | S&F IN REPAIR MCB TPN 40 to 100Amp, 10kA, 415Volt, C curve with necessary connecting and commissioning, complete all as specified and as directed. |
| 78 | S&F IN REPAIR MCB SPN 32Amp, 10kA, 230Volt, C curve with necessary connecting and commissioning, complete all as specified and as directed. |
| 79 | S&F IN REPAIR RCBO DP 40/63Amp, 30mA, with necessary connecting and commissioning, complete all as specified and as directed. |
| 80 | S&F IN REPAIR MCB SPN 40 to 63Amp, 10kA, 230Volt, C curve with necessary connecting and commissioning, complete all as specified and as directed. |
| 81 | S&F IN REPAIR MCB SP 10 to 32Amp, 10kA, 230Volt, C curve with necessary connecting and commissioning, complete all as specified and as directed. |
| 82 | S&F IN REPAIR Lamp holder (Angle type) insulated body with back plate batten fitting with LED 9Watt lamp, PVC/Polycarbonate type with cord grip, suitable for any type of fitting, fixed as in repair, complete all as specified. |
| 83 | S&F IN REPAIR Trica AC LED Flexible strip (5mtrs) 24Watt Tricolor ( Amber -White- Green) strip light, IP65, with and including Adaptor for every 5 Mtr Strip, complete all as specified and directed . |
| 84 | S&F IN REPAIR Professional LED light fitting 1X10watt, surface mounted type, Oval bulk head edge-lit LED fitting, high brightness LEDs 6000K, 220Volt, >120 lum/W, PF>0.95, AC decorative box type with driver, with and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. Make: Cat No. LBHP - 10 - CDL of CG / Cat No. ENDURA RUGBY NEO N-IP65 of Havells or Equivalent make as specified here -in-after |
| 85 | S&F IN REPAIR Professional LED spot light 6 watt (WW/NW/MW) 220 AC beam angle 36º, 220Volt, >120 lum/W, PF>0.95, AC, Verical tilt 30º complete suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. Make: Cat No. CDR-211-06-30/40-SL-NWH of Crompton or Equivalent make as specified here -in-after |
| 86 | S&F IN REPAIR Professional LED light fitting round shape 6/9 watt (WW/NW/MW), 220 volts, AC, 220Volt, >120 lum/W, PF>0.95, AC, recessed type with high efficiency PMMA diffuser, soft glare free light complete with drivers, with and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 87 | S&F IN REPAIR Professional LED light fitting round/square shape 12/15 watt, 220 volts, AC, 220Volt, >120 lum/W, PF>0.95, AC, recessed/surface type with high efficiency PMMA diffuser, soft glare free light complete with drivers, with and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. Make: Cat part No LSDEP-15-CDL* of CROMPTON or Equivalent make as specified here -in-after |
| 88 | S&F IN REPAIR Professional LED light fitting round/square shape 18watt, 220 volts, AC, 220Volt, >120 lum/W, PF>0.95, AC, recessed/surface type with high efficiency PMMA diffuser, soft glare free light complete with drivers, with and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. Make: Cat part No LSDEP-18-CDL* of CROMPTON or Equivalent make as specified here -in-after |
| 89 | S&F IN REPAIR Professional LED Luminaries 1x40Watt, surface mounting decorative / suspended type, aluminium extruded LED Battens, 220V, AC, PC Co-extruded IP65 (WW/NW) suitable for on grid / wall surface, with and including high efficiency LEDs not less than 120lum/watt colour temp 3000-5700k with three core flexible copper conductor, complete all as specified and directed. |
| 90 | S&F IN REPAIR LED Professional light fitting 1X20watt, 220Volt, minimum 120 lum/W, PF>0.95, AC, integrated type batten, with and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 91 | S&F IN REPAIR commercial LED Linear Batten 1X20watt(4ft), INBUILT SENSOR BASED SMART LED AUTO DIMMABLE BATTEN, made from powder coated extruded aluminium housing, opaque glare free diffuser, with all accessories internally pre-wired, Dimming from 100% of rated wattage to 30% on sensing of movement with and including connecting up with twin core flexible copper conductor cable of suitable size, complete all as specified. |
| 92 | S&F IN REPAIR LED Professional light fitting 1X10watt, 220Volt, minimum 120 lum/W, PF>0.95, AC, integrated type batten, with and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 93 | S&F IN REPAIR of FRLSH PVC insulated sheathed, multi standard, copper conductor cable of size 3.0 core x 1.5Sqmm, 1100 volts grade and including cable glands, ferrules and connected accessories, multi stranded 1100 Volt grade confirming to IS 694: 1977, for electric connection, complete all as specified and as directed. |
| 94 | S&F IN REPAIR of FRLSH PVC insulated sheathed, multi standard, copper conductor cable of size 3.0 core x 2.5Sqmm, 1100 volts grade and including cable glands, ferrules and connected accessories, multi stranded 1100 Volt grade confirming to IS 694: 1977, for electric connection, complete all as specified and as directed. |
| 95 | S&F IN REPAIR LED bedside light 3 watts (WW/NW) black powder coated housing with movable string metallic base grey/metal synthetic, with and including connection with suitable size copper wire & fixing the fitting on suitable size of PVC / wooden round block, complete all as specified and as directed. |
| 96 | S&F IN REPAIR LED wall light (picture light) 15watts(WW/NW) aseptically designed with multiple body colour option, high efficiency LED opaque diffuser inbuilt driver, 240 volts AC 50Hzs including connecting up with suitable flexible copper conductor cable of suitable size from ceiling rose, complete all as specified. |
| 97 | S&F IN REPAIR LED Professional recess / surface mounted 4x1 feet , made of CRCA sheet Steel housing LED flat panel which provides soft-light and glare free symmetrical illumination 36/40watt, minimum 120Lum/W (WW/NW), with and including electronic driver, complete all as specified and directed. |
| 98 | S&F IN REPAIR LED luminaires 600mm x 600mm, 35/36 watt, 220Volt, minimum 120 lum/W, PF>0.95, AC recessed/surface type with high efficiency PMMA diffuser soft glare free light, complete with driver, with and including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. Make: Cat Part No. LHEBAEP7IW1W036 of Havells or Equivalent make as specified here-in-after. |
| 99 | S&F IN REPAIR LED Building Security light fitting 25Watts, 230 volts, minimum 120lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection with LED lamp, driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed. Make: Cat Part No. TRP-400-25-57-SL-LM-NSR of CROMPTON or Equivalent make as specified here -in-after. |
| 100 | S&F IN REPAIR LED Building Security light fitting 45Watts, 230 volts, minimum 120lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection with LED lamp, driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed. |
| 101 | Supply and fix in repair LED flood light 50 watts 230Volt, minimum 120 lum/W, AC, pressure die cast aluminium housing with toughned glass and high power LEDs and secondary lenses with IP65/66 protection with bracket impact and corrosion resistant including thermal management in multiple optics complete all as specified and as directed. |
| 102 | M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item. |
| 103 | S&F IN REPAIR Sheet Moulded Compound box of size 250mm x 200mm x 105mm, made out of SMC / FRP with IP 65 protection of thermoplastic circuit breaker boxe suitable for single phase AMR meter, off white colour, with front hinged type door and locking arrangement, fixed on wall with suitable screws, including providing the electrical connection for incoming / outgoing cable through proper lugs/thimbles, complete all as specified and as directed. |
| 104 | S&F IN REPAIR LED wall light (for living room / bedroom / Dinning Hall) B22 base with and including 9watt LED Bulb complete all as specified and directed. |
| 105 | S&F IN REPAIR LED Post Top lantern 20Watt, 230 volts, >120lum/W, with decorative post top for beam angle of ǿ 360°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant toughened glass with frame complete with driver with impact and corrosion resistant complete with IP 65/66 protection, complete all as specified and as directed. Make: . CBP-610-20-57-SL-CA-NBK of CROMPTOM or Equivalent make as specified here-in-after. |
| 106 | S&F IN REPAIR LED Post Top lantern 40Watt, 230 volts, >120lum/W, with decorative post top for beam angle of ǿ 360°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant toughened glass with frame complete with driver with impact and corrosion resistant complete with IP 65/66 protection, complete all as specified and as directed. Make: Cat Part No. CBP-610-40-57-SL-CA-NBK of CROMPTOM or Equivalent make as specified here-in-after. |
| 107 | S&F IN REPAIR LED Post Top lantern 25Watt, 230 volts, >120lum/W, with decorative post top for beam angle of ǿ 360°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant toughened glass with frame complete driver with impact and corrosion resistant complete with IP 65/66 protection, complete all as specified and as directed. Make: Make: Cat Part No. CBP-610-25-57-SL-CA-NBK of CROMPTOM or Equivalent make as specified here-in-after. |
| 108 | S&F IN REPAIR Bollard light LED type 09 / 10Watt, 230 volts, >120lum/W, with decorative aluminium bollard with integrated driver with decorative cylindrical / rectangular shape, out door type with LED lamp, driver with impact and corrosion resistant complete with IP 65/66 protection, complete all as specified and as directed. Make: Cat Part No. LBLA1-10-CDL of CROMPTONor Equivalent make as specified here-in-after. |
| 109 | S&F IN REPAIR PVC rigid conduit 25mm dia bore, ISI Marked , with and including all accessories such as elbow / bend sockets & tee etc., complete all as specified and as directed. |
| 110 | S&F IN REPAIR PVC rigid conduit 19/20mm dia bore, ISI Marked , with and including all accessories such as elbow / bend sockets & tee etc., complete all as specified and as directed. |
| 111 | S&F IN REPAIR PVC Casing & Caping 19/20mm dia bore, ISI Marked , with and including all accessories such as elbow / bend sockets & tee etc., complete all as specified and as directed. |
| 112 | S&F IN REPAIR PVC Casing & Caping 25mm dia bore, ISI Marked , with and including all accessories such as elbow / bend sockets & tee etc., complete all as specified and as directed. |
| 113 | S&F IN REEPAIR Suspended type LED Industrial batten Light power coated CRCA sheet steel body with glare free Diffuser \\" 1x40 watt , 220V AC, IP20, high efficiency LEDs not less than 120lum/watt color temp 3000-5700k, with and including hanging Chain upto 2 x 1.8 Mtr for hanging from Ceiling tress / Angle tress to fittings with three core flexible copper conductor cable, complete all as specified and directed. |
| 114 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 115 | M&L for 10mm thick Rendering on fair faces of new brick work or concrete surfaces in cement mortar 1:6 and finish the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 116 | S&F IN REPAIR PVC Casing & Caping (trunking) system of size 75mm x 50mm, ISI Marked , with and including all accessories such as elbow / bend sockets & tee etc., complete all as specified and as directed. Please Enable Macros to View BoQ information |
