|
| 1 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Supply & Fixing in replacement 2000 Ltr capacity Rotational Moulded Polyethylene Water Storage tank , cylindrical (vertical top Type) Triple layered white colour with closed , connectiing with and including complete accessories such as nipple, union , elbow , Tees , socket etc. or requiered size , hoisted and fixed in position complete all as specified and as directed by Engineer-in-charge. |
| 4 | Supply & Fixing in replacement 1000 Ltr capacity Rotational Moulded Polyethylene Water Storage tank , cylindrical (vertical top Type) Triple layered white colour with closed , connectiing with and including complete accessories such as nipple, union , elbow , Tees , socket etc. or requiered size , hoisted and fixed in position complete all as specified and as directed by Engineer-in-charge. |
| 5 | Supply & Fixing in replacement 500 Ltr capacity Rotational Moulded Polyethylene Water Storage tank , cylindrical (vertical top Type) Triple layered white colour with closed , connectiing with and including complete accessories such as nipple, union , elbow , Tees , socket etc. or requiered size , hoisted and fixed in position complete all as specified and as directed by Engineer-in-charge. |
| 6 | Supply & Fixing in replacement water closet vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rests with and including provision of lime concrete bedding with and including `P' trap and connection to drain and to flushing pipe anti symphonage pipe complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply and Fixing in replacement PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle , with and including brackets, with and including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and as directed by Engineer-in- charge. |
| 8 | Supply and Fixing in replacement Vitreous china wash hand basin, Vitreous china white, flat back, size of 550mm x 400 mm with Mild steel brackets, with and including cutting for and pinning in ends of brackets or erecting stand, with and including waste fittings of brass chromium plated ,with and including 32mm dia PVC waste pipe of required length complete all as specified and directed. as directed by Engineer-in-Charge. |
| 9 | Supply & Fixing 15mm bore PVC connection with PTMT nuts of 450mm long complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply & Fixing in replacement 15 mm bore Angular stop cock , cast copper alloy, chromium plated , Fancy type, (ISI marked) fixed with wall flange complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and Fixing in replacement 15mm bore Pillar tap fancy type Chromium Plated , (ISI marked) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fixing in replacement 15mm bore bib tap cast copper alloy, chromium plated, fancy type (ISI marked) with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. |
| 14 | Material & Labour 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame,including Dismantling of ceiling boards (fibre,pulp,insulation,etc) or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 15 | Material & Labour 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame, Including Dismantling of wall boards (fibre,pulp,insulation,etc) or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 16 | Material & Labour 10 mm thick wooden paneling decorative face ( width of panel 12 cm with tongue or groove system), fixed in wall with nails to timber frame Including Dismantling of wall boards (fibre,pulp,insulation,etc) or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified & directed by Engineer-in-charge. |
| 17 | Material & Labour second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exceeding 13 sqcm & not exceeding 25 sqcm, secured with nails or brads, Including Dismantling of timber fillet under 40 Sq cm in section in framed work complete all as specified & directed by Engineer-in-charge. |
| 18 | Material & Labour 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails not exceeding 3 Sqcm bull ,splayed,chamfered or rounded on one edge or face complete all as specified & directed by Engineer-in-charge. |
| 19 | Material & Labour 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exceeding 3 Sqcm and not exceeding 6 Sqcm bull ,splayed,chamfered or rounded on one edge or face complete all as specified & directed by Engineer-in-charge. |
| 20 | Supply & Fixing Mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-In-Charge. |
| 21 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge. |
| 22 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge. |
| 23 | Material & Labour for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in- charge. |
| 24 | Supply and Fixing 30mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (as approved by Engineer-in-charge) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- (i)Wire gauze / glass shall be measured and paid separately under appropriate items of Schedule 'A' BoQ.(ii) Butt Hinges, Tower bolts, Handles , sliding door bolts , ordinary rat tail pattern springs and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ.(iii) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge.(iv)Primer shall be measured paid separately under appropriate item of BOQ. |
| 25 | Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (as approved by Engineer-in-charge) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- (i)Wire gauze / glass shall be measured and paid separately under appropriate items of Schedule 'A' BoQ.(ii) Butt Hinges, Tower bolts, Handles , sliding door bolts , ordinary rat tail pattern springs and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ.(iii) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge.(iv)Primer shall be measured paid separately under appropriate item of BOQ. |
| 26 | Supply and Fixing Factory made 35mm thick framed, panelled shutter (two panel) with lock rail made of 2nd class Hard wood and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge. Note: Butt Hinges, Tower bolts, Handles , sliding door bolts and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. Please Enable Macros to View BoQ information |
| 27 | Supply and Fixing Factory made 35mm thick framed, panelled shutter (two panel) with lock rail made of 2nd class Hard wood and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge. Note: Butt Hinges, Tower bolts, Handles , sliding door bolts and painting shall be measured and paid seperately under appropriate items of schedule 'A' BoQ. Please Enable Macros to View BoQ information |
