|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 2 | M&L for glazed ceramic white tiles 7mm thick area of tiles of 300x450/300x600 on vertical surfaces such as skirting or dados laid over and including cement mortar backing coat set and jointed with neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in C:M (1:4) for fixing tiles on skirting/dado all as specified and directed. |
| 3 | M&L for non skid ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm on flooring including 15mm thick cement screed bed in CM 1:6 and pointed in white or coloured cement to match the colour of tiles all as specified and directed. |
| 4 | M&L for non skid ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm on flooring including 15mm thick cement screed bed in CM 1:6 and pointed in white or coloured cement to match the colour of tiles all as specified and directed. |
| 5 | M&L for vitrified ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in with 15mm thick screed bed or bedding layer of mortar in CM 1:6 all as specified and directed. |
| 6 | M&L for vitrified ceramic tiles light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting including 10mm thick rendering in C:M 1:4 and pointed in white or coloured cement to match the colour of tiles all as specified and directed. |
| 7 | M&L for minor masonry work such as joint filling of floor/ wall tiles with epoxy inl racking out of old tile joints and making 3mm wide and 3mm deep joint grooves to arrest leakage seepage all as specified and directed. |
| 8 | M&L for chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick set in neat cement slurry with grey cement and no pigments laid over and including 15 mm thick screed bed in CM 1:4. all as specified and directed. |
| 9 | M&L for anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed. |
| 10 | Day to day complaints for removal of blockages, replacing rubber washer, leakage of taps and refixing in same postion on items like 15mm dia bib taps, pillar taps, angle valves, stop cocks, mixer valves, health faucet, PVC connections, float valves of fushing cistern refixing etc complete. |
| 11 | Demolition of brick work/ stone /boulders built in cement mortar including all quoins, arches , pillars etc complete all arte specified and directed |
| 12 | M&L for precast cement concrete block masonry with solid blocks exe 10 cm in width and setting in CM1:6 complete all as specified and directed |
| 13 | M&L for precast cement concrete louvers and jallies, 50 mm thick, type B0 1:2:4 (12.5 mm graded stone aggregate) including all moldings but excluding frame set in CM 1:6. |
| 14 | S&F in repair vitreous china wash down water closet pan(EWC), any color, pedestal pattern complete all a specifed and as directed. |
| 15 | S&F in repairs plastic seat cover, any color as per site requirement, closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts complete. |
| 16 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked fixed in repairs complete all a specifed and as directed. |
| 17 | S&F in repairs PVC connection 15mm bore 45cm long with brass coupling complete all a specifed and as directed. |
| 18 | S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified . |
| 19 | S&F in repairs 100 mm dia stainless steel grating complete all as specified and as directed. |
| 20 | S&F in repair looking mirror of size 600X450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood& aluminium channel beading allround and fixed with hooks & screws |
| 21 | S&F in repair brass chromium plated waste coupling 32 mm dia suitable to WHB/ sink complete all as specified |
| 22 | S&F in repair 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin/ sink. |
| 23 | S&F in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement. |
| 24 | S&F in repair pillar tap 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed. |
| 25 | S&F in repair bib cock 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed in repairs. |
| 26 | S&F in repair two way bib cock 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed in repairs. |
| 27 | S&F in repair stainless steel tubular towal rail 20mm dia , 600mm long all as specified as in repair.(Brass chromium plated). |
| 28 | S&F in repair CP health faucet including flexible ss pipe of 1m length and fittings such as wall clamps all as directed. |
| 29 | Taking down rainwater pipe,eaves gutter and AC vent pipe of any size including AC gutters,etc incl all fittings |
| 30 | S&F PVC (SWR) junctions(single T) equal or unequal to fit 110mm bore PVC pipes etc complete. |
| 31 | S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 110mm bore. |
| 32 | S&F PVC(SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75mm bore. |
| 33 | S&F PVC(SWR) pipe single socketed in any length with rubber ring joints laid in floor 75mm bore. |
| 34 | S&F in repair PVC(SWR) bends any radius to fit to 110mm bore pipe with access door. |
| 35 | S&F in repair PVC(SWR) bends any radius to fit 75mm bore pipe with access door. |
| 36 | S&F in repair PVC(SWR) branch piece, single (Single Y ) equal or unequal 75mm bore. |
| 37 | S&F in repair PVC(SWR) branch piece, single (Single Y ) equal or unequal 110mm bore. |
| 38 | S&F in repair PVC (SWR) junction single, (Single T ) equal or unequal 75mm bore. |
| 39 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames). |
| 40 | Ditto as above but exc 1.5 Sqm but n.exc 4 Sqm. |
| 41 | Taking down shutters of any description n.exc 1 Sqm each. |
| 42 | Ditto but exc 1 Sqm but n.exc 2 Sqm each |
| 43 | M&L for 2nd class Hw Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 44 | M&L for 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 45 | M&L 2nd class HW 30mm glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.24 (a); supplied and fitted to chowkats |
| 46 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. |
| 47 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 48 | Repairs to shutters without taking down of any description exceeding 1.0 Sqm and not exceeding 2 Sqm including resecuring or easing and adjusting in same opening. |
| 49 | S&F 4mm thick sheet glass one side frosted, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 50 | S&F 4mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 51 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples. |
| 52 | S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples. |
| 53 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 54 | S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick with particle board(stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 55 | Repair to aluminium doors of size n.exc 2 Sqm and making good and functional including changing of pivot,repairs to lock, handle, rubber beadings etc all as directed |
| 56 | Repair to aluminium window of any size, pattern and any number of shutter & making good and functional including changing of pivot, replacement of rollers, friction hinges repairs to lock, handle, rubber beadings etc all as directed |
| 57 | M&L PCC 1:2:4 type B-1,using 20mm graded stone aggregate for fixing holdfast including necessary form work complete all as specified and as directed. |
| 58 | S&F MS holdfast made out of FI 25x3mm complete all as specified and as directed. |
| 59 | S&F 200mm long aluminium anodised barrel towerbolt. |
| 60 | S&F in repair 200mm long aluminium anodised barrel towerbolt. |
| 61 | S&F in repair 100mm long aluminium anodised barrel towerbolt. |
| 62 | S&F in repair 300mm long aluminium anodised sliding bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
| 63 | S&F 150mm long aluminium anodised handle. |
| 64 | S&F in repair 150mm long aluminium anodised handle. |
| 65 | S&F in repair 100mm long aluminium anodised handle. |
| 66 | S&F 100mm stainless steel butt hinges,medium wt cold rolled. |
| 67 | S&F in repair 100mm stainless steel butt hinges,medium wt cold rolled. |
| 68 | S&F in repair 75mm stainless steel butt hinges,medium wt cold rolled. |
| 69 | S&F in repair continuous (Piano hinges 30 cm width of flaps) MS, brigh finish or electrogalvanised. |
| 70 | S& F in repair 300 mm mild steel, ordinary rat tail pattern springs including roller and plate complete. |
| 71 | S&F in repair mortice lock vertical type, size 75mm 2 levers brass. |
| 72 | S&F in repair 40mm dia, brass cupboard knobs fixed with nut, screw and washer of brass polished. |
| 73 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 140mm complete all as specified and as directed. |
| 74 | S&F in repair flushing cistern with syphon set complete internal for flush tank 10 Ltrs capacity push button for single layer for PVC flush complete all as specified and as directed. |
| 75 | Taking down cement plastered on brick/concrete wall and ceiling including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 76 | M&L for rendering 15mm thick on brick or concrete wall surfaces with cement mortar (1:4) and wpc @3% by weight finished even and smooth without using extra cement complete all as specified and as directed. |
| 77 | M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and as directed. |
| 78 | M&L for rendering 10mm thick on brick or concret wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 79 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 80 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 81 | M&L for preparation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 82 | M&L preperation of new decorated surfaces of ceiling (plastered or unplastered) including cornices and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 83 | M&L preparation of old surfaces of walls (plastered or unplastered) including cornices and applying one coat of cement base paint complete all as specified and as directed. |
| 84 | M&L preparation of old surfaces of walls (plastered or unplastered) including cornices and applying one coat of oil bound distemper complete all as specified and as directed. |
| 85 | M&L preperation of old surfaces of ceiling (plastered or unplastered) including cornices and applying one coat of oil bound distemper complete all as specified and as directed. |
| 86 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 87 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 88 | M&L preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 89 | M&L preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer. |
| 90 | Removal of vegetation /shurbs on inaccessible roofs or projections etc and spraying of acid of required qty complete from any location of building and making good disturbed surfaces with cement mortar 1:4 or cement concrete type C1 1:3:6, using 20mm graded aggregate including necessary scafolding complete all as specified and as directed. |
| 91 | Repairs to shutters without taking down of any description not exceeding 1.0 Sqm including resecuring or easing and adjusting in same opening. |
| 92 | S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed . |
| 93 | M&L 20 mm thic granite(of any type) work (table rubbed and polished) in cooking platforms, window cills, like in C:M (1:4) similar places over and including 15mm thick screed bed in cement mortar 1:4 including poiting in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition old stone slabs complete all as specified |
| 94 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete. |
| 95 | S&F in repairs, corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as psecified and as directed by Engr -in-charge. |
| 96 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern roof covering complete all as specified and as directed . |
| 97 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified. |
| 98 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 99 | S&F Roof trusses (framed) confirming to Fe 410W, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed by Engr in Charge. |
| 100 | S&F Aluminium powder coated sliding type window with 4mm thick plain sheet glass including provision of airtight heading and handling arrangements complete with using following section :-(i) Outer frame 50.80x25.40x1.5mm(ii) 3 Track frame 43.66x22x1.22mm(iii) Shutter frame31.80x14.50x1.20mm(iv) Shutter interlock 31.80x20.50x1.20mm |
| 101 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 102 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 103 | S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 104 | S&F in repairs 6 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work no of ply 5. |
| 105 | M&L for 5 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed . |
| 106 | M&L for 4 mm thick Figured glass, pin headtype fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed . |
| 107 | Taking down existing water proofing treatment from the roof of bldg including cement mortar removing debries and cleaning roof surface complete all as specified and as directed. |
| 108 | M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3. |
| 109 | Demolition of Cement concrete(unreinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 110 | M&L 40mm thcik PCC Type B0 1:2:4 (using 12.5mm graded aggregate) for cement concrete in roof kerbs or as in padding concrete finishing the cement concrete surface even and smooth without using extra cement complete all as specified |
| 111 | M&L for water proofing treatment by applying oil bound bituminous primer 0.20 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm, reinforced with non-woven polyster matt not less than 160 g/sqm, having softening point not less than 1400 C longitidunal tensile strength not less than 650 N/Sqcm tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2kg/Sqm finishing the surface with solar reflective bitmininous aluminium paint @ 100 g/sqm, complete all as specified and as directed by Engr-in-Charge and as per manufacturer's instructions. |
| 112 | S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed. |
| 113 | S&F in repair ball bearing runners 45 mm, 500 mm long telescopic ball bearing drawer channel full extension load capacity 50 kgs. |
| 114 | S&F in repair stainless steel auto closer counter sunk hinges complete all as directed and as directed. |
| 115 | S&F in repair 100mm long stainless steel handle complete all as directed and as directed. |
| 116 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 117 | M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate 25 mm thick as in leveling course to floors complete. |
| 118 | M&L for 100 mm thick PCC type B1 1:2:4 (using 20mm graded stone aggregate ) as in top surface of pavement and flooring etc. and surfacefinished even and smooth without using extra cement complete all as specified and as directed . |
| 119 | M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and as directed. |
| 120 | M&L for 75mm thick cement concrete type D2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 121 | S&F in repair sinks made of stainless steel 1 mm thick kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified. |
| 122 | Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, intels, etc.; and cutting chases for dampproofing course, etc., and making good, cutting exc 20 cm girth |
| 123 | S&F in repair angle stop valves, cast copper alloy chromiun plated fancy type screwed down for 15 mm bore pipe. |
| 124 | S&F in repair stop valves, cast copper alloy chromiun plated screwed down for 20 mm bore pipe. |
| 125 | S&F in repairs PTMT gratings with provision to receive the waste water pipe and fixed with white cement alround, 100 mm dia with minimum weight 25 gms. |
| 126 | Taking out or down steel tubing and connections incl cleaning for refixing or removal to store 15mm |
| 127 | Taking out or down steel tubing and connections incl cleaning for refixing or removal to store 20mm |
| 128 | S&F kitchen utensil stand stainless steel of size 60 x 90 x 25 cm complete all as specified and directed. |
| 129 | Taking out or down steel tubing and connections incl cleaning for refixing or removal to store 25/32mm |
| 130 | Supply and laying SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor complete 16mm outer dia |
| 131 | Supply and laying SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor complete 20mm outer dia |
| 132 | Supply and laying SDR 11 CPVC pipe and fitings on wall/ceilings or laying floor complete 25mm outer dia |
| 133 | S&F in repairs, PVC bathroom cabinet (white) of size 420 x 300 x 100mm (approx), with one single shutter and built in mirror in front of shutter complete all as specified and as directed. |
| 134 | M&L for scrubbing, cleaning etc thoroughly, HDPE service tank of 750 to 1000 ltr Capacity situated in different locations at satalite area, including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 mtrs, including writing the words \\" MILITARY ENGINEER SERVICES, TANK CAPACITY AND DATE OF CLEANING\\" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint , all as specified and directed. Note :- Each tank can be cleaned several times, each time measured and paid. |
| 135 | All as per Item No above but 500 Ltr capacity compleate all as specified and directed. |
| 136 | M&L for scrubbing, cleaning etc thoroughly,RCC OH service tank capacity above 15000 Ltr to 25,000 Ltr capacity situated in different locations at satalite area including removal of sludge, bleaching sediments, mud or any other deposits to a distance not exc 50 mtrs white washing of inner portion of tank, including writing the words \\" MILITARY ENGINEER SERVICES, TANK CAPACITY AND DATE OF CLEANING\\" in capital letter of suitable height matching with the existing marking at outer wall with synthetic enamel black/white paint , all as specified and directed. Note :- Each tank can be cleaned several times in a contract period and each time it will be measured and paid. |
| 137 | All as per Item No 136 above capacity 10,000 Ltr to 15,000 Ltr capacity complete all as specified and directed. |
| 138 | All as per Item No 136 above capacity below 10,000 Ltrs capacity complete all as specified and directed. Please Enable Macros to View BoQ information |
