Tender For Hiring Contracts For Industrial And Commercial Connectivity For Gail Gas Limited, Bengaluru Cgd Project On Annual Rate Contract Basis For A Period Of One Year, Bengaluru-Karnataka

TDR : 54892526

Tender Notice
BOQ

20 Days Left

Bengaluru , Karnataka

Tender Brief : Tender For Hiring Contracts For Industrial And Commercial Connectivity For Gail Gas Limited, Bengaluru Cgd Project On annual rate contract Basis For A Period Of One Year

Document Fees
Refer document

EMD
₹ 2000000.0 /-

Tender Value
Refer document

Submission Date
20-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GAIL Gas Limited, Noida Name of Work: Hiring contracts for Industrial and Commercial Connectivity for GAIL Gas Limited, Bengaluru CGD Project on ARC basis for a period of one year Tender Reference Number: GAILGAS/BLR/C&P/25-26/86NIC Tender Id: 2026_GAILG_273376_1 Do you want to quote for Bengaluru GA? Yes Name of the Bidder/ Bidding Firm / Company : 1 PRICE SCHEDULE1. This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. 2. Methodology for Selection of Contractor(s) shall be as mentioned Section-II of the Tender.3. Bidders are advised NOT to mention Rebate/Discount separately, either in the BOQ format or anywhere else in the offer. In case bidder(s) intend to offer any Rebate/Discount, they should include the same in the item rate(s) itself under the BOQ and indicate the discounted unit rate(s) only.In case, it is observed that any of the bidder(s) has/have mentioned Discount/Rebate separately, the same shall not be considered for evaluation. However, in the event of the bidder emerging as the lowest bidder, the Discount/Rebate offered by the bidder shall be considered for award of work and the same will be conclusive and binding on the bidder.4. In case, bidder has not quoted for particular Location, then bidder must not fill up the prices in BOQ. NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description(refer SCC & SOW of tender document for complete details) SOR Item Serial Number Quantity Units Estimated Rate (Rs.)(Encluding GST) ATotal amount for SOR Line Items (1+2+3) including 18% GST (in Rs.) Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Unit Rate excluding GST In Figures To be entered by the Bidder (In Rs. ) Rate fixed by buyer Amount of GST on Basic Amount (in Rs.) Total Amount (Rs.) (excluding GST) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total Amount (Rs.) (excluding GST) GST in Amount Total Amount [Inclusive of GST](Rs.) TOTAL TAXES It will be convert only If you choose Full Conversion, Until it will be treated as INR TOTAL AMOUNT In Words
2	Joint site visit of Industrial and Commercial Customers for connectivity
3	Preliminary Study of charged area and further connectivity planning etc.
4	Preparation of prelimanary action plan for connectivity.
5	Carrying out discussion with different agencies/ Industry/ commercial unit for getting pipeline connectivity including preperation of sketch/ drawing for possibile pipeline routes for gas conncetivity in consultation with PMC/ GAIL Gas. Job to be carried out as per detailed SCC & SOW. Job to be executed only after clearance of GAIL Gas Limited.
6	Monthly. After submitting required documents.
7	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order
8	Providing Supervisory Services of Highly Skilled Resource, Resource shall be equiped with two wheeler along with fuel (CNG Bike/Scooter) for day to day cordination with GAIL Gas's Representative and for Liasoning with State Authorities/Utilities and other Departments.
9	Monthly. After submitting required documents.
10	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order
11	Ground Connectivity Works
12	Laying of MDPE pipeline by any method in any type of soil strata upto 20m length from charged Pipeline to Customer premise including connection of Transistion Fitting at customer end.- Supply and installation of TF and construction of pedestral is in contrcator scope.- For pipeline laid more than 20m, payment for additonal length shall be covered in SOR no.3.1 in ruuning meters more than 20m.
13	PE 20mm dia
14	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
15	Testing of network, installation of Permanent Markers & Valve chambers.
16	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
17	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
18	PE 32mm dia
19	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
20	Testing of network, installation of Permanent Markers & Valve chambers.
21	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
22	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
23	PE 63mm dia
24	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
25	Testing of network, installation of Permanent Markers & Valve chambers.
26	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
27	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
28	PE 90mm dia.
29	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
30	Testing of network, installation of Permanent Markers & Valve chambers.
31	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
32	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
33	PE 125mm dia.
34	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
35	Testing of network, installation of Permanent Markers & Valve chambers.
36	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
37	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
38	Survey, Pit Excavtion in all types of soills/PCC/RCC/Paver block/Ashpalt/Whitetopping etc., charged pipeline identification, Hook up activities, Online tapping either by Saddle / Tee / extension by Coupler for connecting the Pipeline laid as per above SOR 2.1 including fittings, Backfilling. Restoration shall be paid through other SOR
39	Connectiviy for PE 20mm dia laid under 2.1.
40	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
41	Testing of network, installation of Permanent Markers & Valve chambers.
42	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
43	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
44	Connectiviy for PE 32mm dia laid under 2.1.
45	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
46	Testing of network, installation of Permanent Markers & Valve chambers.
47	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
48	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
49	Connectiviy for PE 63mm dia laid under 2.1.
50	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
51	Testing of network, installation of Permanent Markers & Valve chambers.
52	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
53	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
54	Connectiviy for PE 90mm dia laid under 2.1.
55	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
56	Testing of network, installation of Permanent Markers & Valve chambers.
57	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
58	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
59	Connectiviy for PE 125mm dia laid under 2.1.
60	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
61	Testing of network, installation of Permanent Markers & Valve chambers.
62	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
63	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
64	Liasioning and coordination works for carrying out connectivity work for SOR item 2.0Liaisoning with concerned land owning authorities- state authorities / owners / ( i,e BBMP/ BDA/KIADB/BMRCL/ KHB/GRAM PANCHAYAT/PWD/LOCAL ASSOCIATIONS & BODIES, BUILDER, RWA (resident welfare association)/society/individual land owners etc..) & also all other associated liaisoning work as required for smooth execution of pipeline laying and making the last mile connectivity works complete from the nearest available mainline works with any authorities such as BBMP / BDA / BWSSB, local area representatives, traffic police, police, BESCOM, BSNL, BWSSB, BMRCL etc. and any other utility companies /agencies such OFC operator etc . Repairing/replacement of all damaged utilities if any, and payment of any compensation (if claimed by Builder/RWA/Owner/other utility agencies) is in scope of the contractor.Payment charges towards demand note/ BG etc against the permission raised by the concerned authorities will be paid by GAIL Gas.
65	In- principal permission for laying of the pipeline from the concerned land-owning authority shall be obtained by Contractor
66	Payment for the length applied shall be paid after the completion of laying and testing.
67	Payment along with final bill.
68	PE PIPELINE
69	PE Pipe Laying in any type of surface like unprepared surface (Katcha surface)/ Normal Surface/ Hard surface/Rock surface etc using open cut/ Moling (without Casing)/ Moling (with Casing)/ Horizontal Directional Drilling technique (with and without casing pipe) methodology. For HDD in Rock surface payment shall be done as per SOR#3.2
70	Receipt. Loading. unloading. storing. reloading. tranportation. unloading. stringing and laying of PE100. SDR11 line pipes of all sizes including. proper stacking. identification.and supply of accessories of all sizes & thickness like PE Bends. Couplers. Endcaps. Tee. Reducer. CS / GI to PE Fittings (i.e. Transition Fittings of sizes 20 mm to 90 mm). Warning Mat etc. Handling. Stringing / uncoiling. aligning of the PE line pipe on the pipeline Right-of-Use / route. laying / installation of PE line pipe alongwith required accessories as mentioned above as per specification wherever required depending on site condition including execution of all works; Storeage of material in contractor's store. fabrication. access for construction procurement and supply of all materials. consumables. equipments. labour and other inputs.
71	In the case of free issue items. the scope also includes. receiving and loading from Owner's designated store. transportation. unloading and stacking of free issue items at Contractor's store. -Laying of all PE pipe (PE 100 SDR11). Including supply of HDPE casing pipe (in case of HDD (with case).Moling(with case) . Couplers. End caps etc. (Ref. of Particular job specification).Survey of under ground utilities. execution of the work as per specification. including excavation of pits moling with the hole size not exceeding 20% of the pipe dia. jointing and insertion of carrier pipe with casing. testing & commissioning and restoration of the pits to original condition. submission of As-Built Graph as per specifications and the instruction of Engineer-in-charge.
72	HDPE Casing details is as given below:-1. For 20mm PE pipe (min. 50mm, max. 50mm)2. For 32mm PE pipe (min. 50mm, max. 90mm)3. For 63mm PE pipe (min. 110mm, max. 160mm)4. For 90mm PE pipe (min. 200mm, max. 250mm)5. For 125mm PE pipe (min. 250mm, max. 315mm)
73	Carrying out all temporary. ancillary. auxiliary works required to make the PE pipeline ready for commissioning as per drawings. Specifications. scope of work indicated in PJS and other provisions of tender/ contract documents and instructions of Engineer-in-charge. including but not limited to carrying out the following works:Surveying of route and detours required at the time of execution. preparation of construction drawings showing survey details and submit same to Owner for review / approval.
74	Carrying out preliminary activities such as preperation of drawings wherever required for crossing etc.Preparation and getting approval of schedules. execution procedures. drawings/ sketches/ wherever required. making trial pits to determine the underground utilities/ services etc.. restoration of the abandoned trial pits to original condition.
75	Stacking and installation of construction markers. clearing. fencing. grubbing. cutting of trees. full filling all the requirements of various statutory/ environment authorities to the entire satisfaction of concerned authorities. grading of work area.
76	Barricading the work area as per local authorities norms & to the satisfaction of Owner/ Eingineer -in- charge. installation of safety signs.Barricading the pipeline construction area prior to execution of the works as per drawing enclosed with tender/ contract documents and to the entire satisfaction of owner / engineer- in -charge.
77	Laying using open trench without casing includes survey of under ground utilities (through trial pits). execution of work as per specification including Trenching to all depths by excavation in all types of soils including soft/ rocky strata and different type of pavement / footpath / roads etc. including rock breaking. chiselling or otherwise cutting etc. as required and storing excavated soil. reusable materials at designated area as directed by Engineer in charge and to a width to accommodate the pipeline as per the relevant standard/ specification etc.
78	The minimum depth of the top of pipeline shall be 1.0 m measured from top of pipeline to the top of undisturbed surface of the soil or as per Specification/ OISD- 226 & PNGRB latest guidelines whichever is higher.Dewatering of trenches / pits if required as per site condition. Repairing of all damaged utilities if any. and payment of any compensation (if claimed by owner / other utility agencies)Uncoiling / stringing & aligning of PE pipes. clamping. jointing of the pipe ends / fittings / valves by qualified personnel using approved electro-fusion techniques as per specification.Note:- Coordinates to be taken for implementation for GIS for Valve pit, Fusion welding location and MRS.
79	Installation / lowering the pipeline in trench to required depth as per PJS. Technical Specification & drawings. supply & placement of HDPE Yellow colour warning mat (refer PJS) over the pipeline along the complete route as per standard drawings. data sheets & technical specifications. padding around pipeline including supply of suitable padding material duly approved by EIC. Backfilling to its original condition with excavated earth / borrowed select soil/sand duly approved by EIC & its compaction & crowning. At certain specific area of ROU. trench shall be backfilled & compacted and shall be made ready for motorable and no seperate payment shall be admissible against this activity.All tiles / slabs / curb stones etc removed during excavation shall be placed properly.Restoration shall be carried as per separate SOR item mentioned elsewhere in the SOR or to be done by Owner / concerned authorities.
80	The scope of work against this item also include Electro-fusion jointing of valves. fittings wherever required and as directed by Engineer-in-charge.The scope of work against laying of 20 mm pipe also includes works like making of PCC pedastal of grade (1:2:4) and size ( (300mm(L)X200mm(W) XHeight (H)). (H>=300mm & will be as per site condition) ). supply and installation of GI Sleeve (Heavy (C-Class) as per IS-1239). filling of sand and installation of TF (along with supply).
81	Pneumatic testing. purging with nitrogen and commissioning as per specification and approved procedures providing all tools and tackles. nitrogen. instruments. manpower and other related accessories and as per the instructions of the Engineer-in-charge.
82	Final clean-up of right-of-use or area disturbed by contractor during their construction activities for laying of pipeline works and disposal of debris and surplus material to designated disposal areas and backfilling of trench and compaction of the same as per satisfaction of Owner and / or as directed by Engineer–in–charge.
83	Maintaining the completed pipelines and installation for any defect or failures during defect liability period (i.e. 12 months from date of completion of work).Handing over the completed works to Owner for their operation/ use. reconciliation of material area wise and obtaining \\"no objection certificate\\" from Owner/ PMC.Preparation and submission of Daily progress report. Laying Graphs / PE line cards on daily basis.
84	On completion of gas charging of pipelines. Preparation and submission of As-built drawings. crossings details. termination. utility graphs and deviation statements.In case. the minimum required depth is not possible due to site condition. necessary mitigation measures with minimum permissible top cover shall be carried out by the contractor in consultation with EIC as per PNGRB Guidelines. without any time and cost implecation to owner.
85	Submission of all documents required for contract closure in numbers as mentioned in contract.Any other activities not mentioned / covered explicitly above. but otherwise required for satisfactory completion / operation / safety / statutory / maintenance of the works shall also be covered under the scope of work and has to be completed by the Contractor within specified schedule at no extra cost to Owner. All the work shall be executed in accordance with the provision of contract.
86	20 mm PE 100 pipe
87	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
88	Testing of network, installation of Permanent Markers & Valve chambers.
89	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
90	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
91	32 mm PE 100 pipe
92	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
93	Testing of network, installation of Permanent Markers & Valve chambers.
94	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
95	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
96	63 mm PE 100 pipe
97	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
98	Testing of network, installation of Permanent Markers & Valve chambers.
99	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
100	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
101	90 mm PE 100 pipe
102	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
103	Testing of network, installation of Permanent Markers & Valve chambers.
104	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
105	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
106	125 mm PE 100 pipe
107	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
108	Testing of network, installation of Permanent Markers & Valve chambers.
109	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
110	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
111	NOTE i) The lengths of pipelines are tentative. ii) For restoration of asphalt / concrete roads. the item for construction of asphalt top / concrete top / Tiles/Stone slab/Paver Blocks/Curb Stones shall be paid separately as per the SOR 4
112	Laying of Pipeline by HDD in Rock Terrain
113	32 mm PE 100 pipe
114	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
115	Testing of network, installation of Permanent Markers & Valve chambers.
116	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
117	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
118	63 mm PE 100 pipe
119	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
120	Testing of network, installation of Permanent Markers & Valve chambers.
121	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
122	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
123	90 mm PE 100 pipe
124	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
125	Testing of network, installation of Permanent Markers & Valve chambers.
126	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
127	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
128	125mm PE 100 pipe
129	In continuous stretches of minimum 100 Mtrs. Including survey, online tapping either by Saddle/ Tee/extension by coupler, trench, less laying or total scope whichever is less after completion of trenching, lowering, electro-fusion jointing of pipeline, back-filling and compaction for the complete stretch as per the scope of work.
130	Testing of network, installation of Permanent Markers & Valve chambers.
131	Pre-Commissioning of the system with Nitrogen at positive pressure or Commissioning with gas charging of the PE pipeline (case decided by EIC) and material re-conciliation.
132	Submission of all documents, submission of NOC, Submission of As built drawings. Closure of contract Submission of final bill.
133	Restoration
134	Restoration of the roads. pavements. channels. footpaths. tiles. stones etc. to original condition including supply of the approved quality material required. as per local authorities norms. obtaining NOC from concerned local authorities / land owners / third party inspection agencies (if any) designated by owner and to the satisfaction of Engineer-in-charge.
135	Asphalt road: Restoration of bitumen Asphalt road after laying of pipeline as per the drawing no. MEC/23VT/01/11/D2/ST/LY/0211/R00/A3 , specifications and instruction of Engineer-In-Charge. Restoration of roads shall be done as per requirement of BBMP/ BDA/ KIADB/BMRCL/KHB/GRAM PANCHAYAT/PWD/LOCAL ASSOCIATIONS & BODIES, BUILDER, RWA and to get NOC from the concerned authorities. Restoration of the asphalt road cut portion for pipeline trench width shall be carried out by filling the bottom layer with good earth/Soil filling followed by 225mm thk. GSB & 250mm thk. WMM with top bituminous layers comprising of 50mm thk. DBM & 40mm thk. BC matching with the existing road top level. This item also includes disposal of surplus soil /debris with all lift & leads, cutting of Top layer of asphalt road by mechanized saw/cutters for maintaining straight line.
136	After Complete area wise restoration as per the standards (bidder may note that restoration work shall be carried out after successful testing and commissioning I gas charging in respective area).
137	After obtaining NOC from respective local authorities/third party agencies designated by land owing agencies.
138	After Completion of all works and closure of contract.
139	Restroration of the all kind of pathway: Restoration by using excavated material such as tiles/pavers/granite/red stone etc by providing PCC 1:4:8 of 50mm thickness below after compaction of the filled soil, fixing the Tiles/Paver blocks/Granite etc and matching it to the existing surface. Item includes providing of extra finished material if required.such as Tiles/Paver blocks/Granite etc matching to original pathways. The area restored shall be measured in Sqm.
140	After Complete area wise restoration as per the standards (bidder may note that restoration work shall be carried out after successful testing and commissioning I gas charging in respective area).
141	After obtaining NOC from respective local authorities/third party agencies designated by land owing agencies.
142	After Completion of all works and closure of contract.
143	Reinforced Concrete road/ Reinforced Concrete pavement: Restroration of reinforced concrete road and pavements shall be done by providing PCC 1:4:8 of 75 mm thick and RCC 1:2:4 of 100 mm thickness and providing 8 mm dia rod at 200 mm C/C. The cost of Shuttering, compacting the base surface etc.. are in the scope of this item. The area restored shall be measured in Sqm.
144	After Complete area wise restoration as per the standards (bidder may note that restoration work shall be carried out after successful testing and commissioning I gas charging in respective area).
145	After obtaining NOC from respective local authorities/third party agencies designated by land owing agencies.
146	After Completion of all works and closure of contract.
147	Installation of valve in pit including supply of valves
148	Supply of isolation valves (as per data sheet) and installtion of valves in the valve pits as per typical drawing and specification enclosed and instructions of Engineer-in-charge. Payment of valve pits shall be paid separately as per SOR.
149	PE Valve 32 mm dia
150	Upon supply of items including all Accessories and acceptance of supplied items at site.
151	Upon Complete installation of item's and all its associated work.
152	After submission of documents and closure of contract.
153	PE Valve 63 mm dia
154	Upon supply of items including all Accessories and acceptance of supplied items at site.
155	Upon Complete installation of item's and all its associated work.
156	After submission of documents and closure of contract.
157	PE Valve 90 mm dia
158	Upon supply of items including all Accessories and acceptance of supplied items at site.
159	Upon Complete installation of item's and all its associated work.
160	After submission of documents and closure of contract.
161	PE Valve 125 mm dia
162	Upon supply of items including all Accessories and acceptance of supplied items at site.
163	Upon Complete installation of item's and all its associated work.
164	After submission of documents and closure of contract.
165	Construction of Valve Pits as per the enclosed tender drawing and specification. The item includes supply of all the material including Pre-cast RCC cover. shuttering. reinforcement. labour. curing etc as per the drawings. specification and instruction of EIC.
166	Type-I having Internal size of Minimum 1000 x 1000mm
167	Upon supply and Complete installation of item’s and all its associated work.
168	After submission of documents and closure of contract.
169	Type-II having Internal size of Minimum 600 x 600mm
170	Upon supply and Complete installation of item’s and all its associated work.
171	After submission of documents and closure of contract.
172	Note: The tender drawing enclosed is only for reference purpose and contractor shall be required to prepare drawings (in line with reference tender drawing) for specific sizes of Valve pits and the same shall be approved by EIC.
173	Fabrication & Installation of Markers
174	RCC Route Markers
175	Supply, fabrication and installation of RCC route markers as per the attached drawing in technical volume, along the route including all associated civil works such as excavation and construction in all types of soils, construction and pedestals and grouting with concrete.
176	Upon supply of items including all Accessories and acceptance of supplied items at site.
177	Upon Complete installation of item's and all its associated work.
178	After submission of documents and closure of contract.
179	Pole Markers with Foundation
180	Supply, fabrication and installation of plate markers as per the attached drawings in technical volume including all associated civil works such as excavation and construction in all types of soils, construction and pedestals and grouting with concrete, cleaning, stencil let.
181	Upon supply of items including all Accessories and acceptance of supplied items at site.
182	Upon Complete installation of item's and all its associated work.
183	After submission of documents and closure of contract.
184	Warning Plate Markers
185	Supply, fabrication and installation of plate markers, including application of approved color and quality of primer and paint, stencil letter cutting of lettering, numbers, direction, etc. as per the attached drawing in technical volume to be installed near regulator.
186	Upon supply and Complete installation of item’s and all its associated work.
187	After submission of documents and closure of contract.
188	Excavation of Hard rock/surface
189	Excavation of trench or pits, wherever hard rock presence is exceeding 1.5 m in any direction of the trench and excavation of trench or pits in Malba/Multiple layers of asphalt/ brick / PCC/RCC etc and removable only by pneumatic chisel / drill as per the specifications and direction of EIC. The rates are payable over and above the Laying rates as per relevant SOR no. 3.1
190	Cutting of PCC/RCC surface with thickness more than 12\\" or Continuous asphalt multi-layer/ Malba/ Brick / Boulders more than 24\\".(Malba shall be considered as a strata where soil is in mixed form of debris/building rubbish or discarded pieces of bricks/stones )
191	After completion of the work in all respects.
192	After submission of documents and closure of contract.
193	Rock Cutting encountered while excavation of trenches for item 3.1 of SOR, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 meter. In case of rocky soil, the bedding shall be done with approved/ good quality packing sand, subject to the approval of the EIC, the size distribution of the sand / shall be the same as per soil. The packing sand shall be placed to a minimum thickness of 150mm around the pipe in case of rocky terrain.
194	After completion of the work in all respects.
195	After submission of documents and closure of contract.
196	Note: i) The quantities mentioned are indicative only. ii) For all the supply items mentioned above, procurement shall be made as per specification after due approval of engineer- in - charge.
197	Liaisoning with Land Owning Agencies for Permission
198	Liasioning works for carrying out connectivity for SOR item 3.0 Liaisoning with concerned land owning authorities- state authorities / owners / ( i,e BBMP/ BDA/ KIADB/BMRCL/KHB/ GRAM PANCHAYAT/ PWD/ LOCAL ASSOCIATIONS & BODIES, BUILDER, RWA (resident welfare association)/society/individual land owners etc..) & also all other associated liaisoning work as required for smooth execution of pipeline laying and making the last mile connectivity works complete from the nearest available mainline works with any authorities such as BBMP / BDA / BWSSB, local area representatives, traffic police, police, BESCOM, BSNL, BWSSB, BMRCL etc. and any other utility companies / agencies such OFC operator etc . Repairing/replacement of all damaged utilities if any, and payment of any compensation (if claimed by Builder/RWA/Owner/other utility agencies) is in scope of the contractor.
199	In- principal permission for laying of the pipeline from the concerned land-owning authority shall be obtained by Contractor
200	Payment for the length applied shall be paid after the completion of laying and testing.
201	Payment along with final bill.
202	Construction of RCC structure for protection of service line for drain/nallah Crossings
203	Construction of Non suspended slabs/pavement slabs including pedestal/ramp etc.using reinforced cement concrete of M-25 grade (Concrete shall be design mix/nominal mix with 20 mm & down size graded crushed stone aggregates) to protect the PE pipe laid. All necessary form work, finishing the top surface rough/smooth as required in any position, shape, level and thickness etc. shall be as specified and directed by EIC. The rates shall include grouting of pockets, supply of all material, tools, reinforcement steel etc.
204	Upon supply and Complete installation of item’s and all its associated work.
205	After submission of documents and closure of contract.
206	CIVIL WORKS
207	Earth Work
208	Upon supply and Complete installation of item’s and all its associated work.
209	After submission of documents and closure of contract.
210	Earth in excavation and filling to the grades and levels shown in the approved drawings in all kinds of conditions including for Road embakments, using approved quality good earth from designated borrow area, for all heights and depths including clearing and stripping (min. 150 mm) of the area marked for filling, taking spot levels, consolidating the exposed natural soil surface, excavating the earth from borrow area loading, transporting & unloading, spreading in layers not exceeding 150 mm thickness, breaking clods, watering (if reqd.), ramming and compacting by manual/ mechanical means to give minimum 92% of modified Proctor's density of earth, testing & dressing including disposal of all unserviceable material all complete as per specifications and directions of Engineer-in-charge.
211	(Rate to include cost of all labour, tools, tackles, equipment, hire chanrges, cost of borrow earth by way of royalties, right of way, cess etc., as applicable with all bye works and sundry works).
212	PCC 1:2:4
213	Upon supply and Complete installation of item’s and all its associated work.
214	After submission of documents and closure of contract.
215	1 Cement : 2 Coarse sand : 4 stone aggregate 20mm nominal size.
216	PCC 1:4:8
217	Upon supply and Complete installation of item’s and all its associated work.
218	After submission of documents and closure of contract.
219	1 Cement : 4 Coarse sand : 8 stone aggregate 40mm nominal size.
220	(Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials, shuttering, earthwork in excavation and backfilling using approved earth in all conditions etc. with all bye works and sundry works.)
221	Reinforced Cement Concrete
222	Upon supply and Complete installation of item’s and all its associated work.
223	After submission of documents and closure of contract.
224	Providing and laying reinforced cement of grade M-25 with 20mm and down grade crushed stone aggregate in all types of structures like foundations, pedestals, pedestal bases, pipe supports, sleepers, column, equipment foundation, Non suspended slabs/pavement slabs, ramps, cable trench inlcuding construction joints, bitumen painting on surface in contact with soil, supplying and fixing reinforcing steel, shuttering, inserts, finishes, grounting etc. at all depths and heights complete as per drawings, specifications and direction of the Engineer-in-charge.
225	Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all maerials such as minimum 43 grade cement including sulphate resistant cement for sub-structures, R/F steel, Inserts, bolts, conduits, bitumen, other minor constrcution materials, shuttering, stanging, earthwork in excavation and backfilling using serviceable earth in all conditions, shorting bailing and pumping out water, testing of concrete, curing etc. with all bye works and sundry works.
226	Concrete Pavement
227	Providing and laying reinforced cement concrete of (M-25 grade) with 20mm and down grade crushed stone aggregate in pavement, including preparation of base (i.e. compacted subgrade, 200 thk sand and 50 thk PCC M-10 grade), leaving pockets if necessary, making recess, projections, fixing inserts conduit pipes (GI, PVC, HDPE, etc.) laying in alternate panels, filling the gaps between the panels with bitumen etc., making slopes, finishing edges, leaving bars for pedestals & sleepers including providing sand fill isolation , shuttering, providing and fixing reinforcing steel, curing, chipping and modification works etc. as specified in any shape, thickness, position and finishing the top surface smooth as per requirement etc. all complete as per drawings, specifications and directions of the Engineer-in-charge.
228	Concrete Pavement- 150mm thick (Type-I)
229	Upon supply and Complete installation of item’s and all its associated work.
230	After submission of documents and closure of contract.
231	Brick Work
232	Upon supply and Complete installation of item’s and all its associated work.
233	After submission of documents and closure of contract.
234	Providing brick work with brick class designation M-7.5 of IS:1077 in cm1:4 (1 cement : 4 sand) in steps, walls, retaining walls and load bearing structures drains, or any shape with all lead, depths & height including curring, scaffolding, etc., as per specifications and drawings with all bye-works and direction of the Enfineer-in-charge.
235	(Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement, bricks, finishes, bitumen, other minor constrcution materials, shuttering, staging, masonry work, plastering, painting etc. with all bye-works and sundry works).
236	Note: The quantites of individual item can varied as per site requirement.The payment will be made as per actual certified measurement at site.
237	Laying of Brick layer/ Concrete
238	Providing single layer of Brick / Concrete / or impact resistant tape to entire width of trench above Warning Mat placed in trench over the laid pipeline as per OISD 226, standard drawing, specification and instruction of Owner. (Rate to include cost of all labour, tools, tackles, equipment, hire charges & supply of all materials, etc)
239	Brick Layer for width of PE pipeline trench as per drawing (75 mm thk.)
240	Upon supply and Complete installation of item’s and all its associated work.
241	After submission of documents and closure of contract.
242	Concrete for width of PE pipeline trench as per drawing (80 mm thk.)
243	Upon supply and Complete installation of item’s and all its associated work.
244	After submission of documents and closure of contract.
245	Demolition of PCC work below plinth level
246	Upon supply and Complete installation of item’s and all its associated work.
247	After submission of documents and closure of contract.
248	Demolishing plain cement concrete (PCC) work (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning, etc. , disposal of unserviceable material outside the boundary limits keeping the owner indemnified of any liabilities from statutory/ local bodies, all complete work as specified and directed.
249	Excavation for foundation works
250	Excavation as per plan, upto 3 meters and upto any lead in all conditions, backfilling using serviceable earth and disposal of surplus and unserviceable earth. Soil to be levelled and neatly dressed complete in all respect as per scope of work, technical specification and directions of EIC.
251	Upto 3.0 Mtrs
252	Upon supply and Complete installation of item’s and all its associated work.
253	After submission of documents and closure of contract.
254	Dismantling of RCC & cutting of reinforcement (Thickness above 3”)
255	Upon supply and Complete installation of item’s and all its associated work.
256	After submission of documents and closure of contract.
257	Structural Works
258	Supplying, fabricating & fixing steel structural cage fabricated from Angle conforming to IS:808 & fixing of GI weldmesh made from 3mm GI wire @ 75 mm bothways to structural steel frame by means of welding/bolting, including applying two coats of approved quality of synthetic enamel paint over a priming coat of in approved shade including supply of all raw materials, bolts, electrodes, transportation, including Hilti arrangement ,locking arrangement for fixing of posts etc complete as per enclosed drawing, technical specifications, scope of works and directions of the Engineer-In-Charge. Note:- Material shall be supplied and fabricated as per site condition and Contractor have to take quantity approval from EIC/OWNER prior to commencement of work and order placement.
259	Upon supply and Complete installation of item’s and all its associated work.
260	After submission of documents and closure of contract.
261	Providing and fixing chain link Fencing
262	Upon supply and Complete installation of item’s and all its associated work.
263	After submission of documents and closure of contract.
264	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50mmx50 mmx3.1mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per Specifiaction, drawing & the direction of Engineer-In-charge. The cost of structural steel and PCC shall be paid separately.
265	Upon supply and Complete installation of item’s and all its associated work.
266	After submission of documents and closure of contract.
267	Supplying, fabricating & fixing fencing gates fabricated from pipes conforming to IS:1161 and plates conforming to IS:2062 & fixing of GI weldmesh made from 3mm GI wire @ 75 mm bothways to structural steel frame by means of welding/bolting, painting with enamel paint in approved shade including supply of all raw materials, bolts, electrodes, transportation etc complete as per enclosed sketch, technical specifications, drawings and directions of the Engineer-In-Charge.2m Wide x 2.1m High
268	Upon supply and Complete installation of item’s and all its associated work.
269	After submission of documents and closure of contract.
270	Providing and fixing of barbed wire.
271	Upon supply and Complete installation of item’s and all its associated work.
272	After submission of documents and closure of contract.
273	MRS / Metering Skid/Wall Mounted MRS.
274	Installation of MRS / Metering Skid/ DRS on foundation
275	Receiving and taking over, handling, loading, transportation and unloading of MRS / Metering Skid from Owner's designated stockyards to site, installation at foundation and hooking up with PE pipe including all works as required to complete the job as per the drawings and specification, scope of work mentioned in tender doucment. The scope includes supply of transition fittings,GI Sleeve, other MDPE and CS fittings as required and various associated works to commission MRS / Metering Skid. (Note : - The installation included CS piping work included welding,testing,NDT etc.,however payment for the CS piping work along with accessories supply will be paid in SOR item 17 to 35 respectively.)
276	Note: 1) Amount towards civil work shall be payable as per related SOR items. 2) Rate to include cost of all labour, tools, tackles, equipment, hire charges.3) All fittings and consumables including Bolts, nuts, washer, U-clamps, gaskets etc. if required during installation shall be procured and supplied by the Contractor within the rate quoted. These items shall not be separately measured and paid.
277	MRS / Metering Skid <2000 SCMD
278	Upon Complete installation of items and its associated work
279	Testing of installations.
280	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
281	After submission of documents and closure of contract.
282	MRS / Metering Skid 2000-5000 SCMD
283	Upon Complete installation of items and its associated work
284	Testing of installations.
285	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
286	After submission of documents and closure of contract.
287	MRS / Metering Skid 5000-20000 SCMD
288	Upon Complete installation of items and its associated work
289	Testing of installations.
290	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
291	After submission of documents and closure of contract.
292	MRS / Metering Skid >20000 SCMD
293	Upon Complete installation of items and its associated work
294	Testing of installations.
295	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
296	After submission of documents and closure of contract.
297	DRS upto 5000 SCMH
298	Upon Complete installation of items and its associated work
299	Testing of installations.
300	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
301	After submission of documents and closure of contract.
302	Installation of Wall Mounted Metering System (Meter, Regulator & Accessory) locked in cage
303	Receiving and taking over, handling, loading, transportation and unloading of all items for Wall Mounted Metering System (Meter, Regulator & Accessory) from Owner's designated stockyards to site, installation on wall and hooking up with PE pipe including all works as required to complete the job as per the drawings and specification, scope of work mentioned in tender doucment.The scope includes supply of items required as per the drawing in scope of work (Details of drawings as PJS) viz. transition fittings, GI/Concrete Sleeves and other MDPE and CS fittings etc. as required and various associated works.(Only Meters and Regulators shall be provided as free issue) and all associated works (For CS pipe and other items refer sl. no. 17 to 35) to commission Wall Mounted Metering System. Note : Installation works included CS piping work, Testing etc.,however payment for the CS piping work along accessories will be paid in diiferent SOR item
304	Note: 1) Amount towards civil work shall be payable as per relevant SOR items. 2) Rate to include cost of all labour, tools, tackles, equipment, hire charges .3) All fittings (those are not mentioned in SOR item 17 to 35) and consumables including Bolts, nuts, washer, U-clamps, gaskets etc. if required during installation shall be procured and supplied by the Contractor within the rate quoted. These items shall not be separately measured and paid.4)The wall mounted Metering System to be kept in cage with locking facility, However payment for Structural work will be paid against respective SOR
305	The Typical Design of MRS/Metering System are as per \\"Standardized metering system Design, Selection & Installation philosophy for supply of PNG to Industrial and Commercial Customers of GAIL Gas.\\"Note: -The sizes mentioned in drawings are indicative & may vary as per actual requirment at site .
306	Wall Mounted Metering System < 500 SCMD
307	Upon Complete installation of items and its associated work
308	Testing of installations.
309	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
310	After submission of documents and closure of contract.
311	Wall mounted Metering System 500 to 2000 SCMD
312	Upon Complete installation of items and its associated work
313	Testing of installations.
314	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
315	After submission of documents and closure of contract.
316	Wall mounted Metering System >2000 SCMD
317	Upon Complete installation of items and its associated work
318	Testing of installations.
319	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
320	After submission of documents and closure of contract.
321	Note: i) The quantities mentioned are indicative only. ii) For all the supply items mentioned above, procurement shall be made as per specification after due approval of engineer- in - charge.
322	Installation of Wall Mounted Metering System (Pre-assemble)
323	Receiving and taking over, handling, loading, transportation and unloading of all items for Wall Mounted Metering System (Pre-assembled as per standard drawing Attached in PJS Drawing ) from Owner's designated stockyards to site, installation on wall and hooking up with PE pipe including all works as required to complete the job as per the drawings and specification, scope of work mentioned in tender doucment.The scope includes supply of transition fittings, Sleeves and other MDPE and CS fittings etc. as required and various associated works, however, the Metering System assembly ( As per drawing ) shall be provided as free issue by GAIL Gas. Installtion work done by Contractor along supply of consumables including Bolts, nuts, washer, U-clamps, gaskets etc. if required during installation shall be procured and supplied by the Contractor within the rate quoted.
324	Note: 1) Amount towards civil work shall be payable as per related in respective SOR 2) Rate to include cost of all labour, tools, tackles, equipment, hire charges .3) The wall mounted Metering System to be kept in cage with locking facility, However payment for Structural work will be paid as per respective SOR.
325	Installation of GI Pipe upto 2\\" size with isolation valve for commercial meter inlet connection from TF
326	Supply and installation of upto 2\\" GI pipe
327	Upon Complete installation of items and its associated work
328	Testing of installations.
329	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
330	After submission of documents and closure of contract.
331	Supply and installation of upto 2\\" Isolation valve
332	Upon Complete installation of items and its associated work
333	Testing of installations.
334	Pre-Commissioning with Nitrogen at positive pressure or Commissioning with gas charging including all related activities Cease decided by EIC.
335	After submission of documents and closure of contract.
336	Removal of MRS (all capacities) from existing consumer's premise,
337	Removal of MRS(all capacities) from existing consumer's premise for shifting to another site/store. The scope of work also includes excavation to retrive PE pipe line , disconnection of existing pipe lines (PE & Steel).
338	Removal and shifting of MRS/Metering Skid/wall mounted MRS/metering system from customer’s premises to another site/store, including store.
339	After Completion of all works and closure of contract.
340	Note:- Transportaion of removed metering skid to store shall be payble under SOR item no.15.2. However, if this skid is being shifted directly to new location for installation at new customer premises then transportation to be claimed from 14 as applicable.
341	Transportaion of removed metering skid to store
342	Removal and shifting of MRS/Metering Skid/wall mounted MRS/metering system from customer’s premises to another site/store, including store.
343	After Completion of all works and closure of contract.
344	Conversion of Commercial Appliances/industrial :
345	Conversions of all types of commercial appliances to NG based appliances. Supply & changing of the nozzles /jets and associated controls for Non-domestic appliances (imported appliances included) with proper tools and tackles. Cleaning and performing minor maintenance, greasing etc. of the appliance. Testing and showing the performance to the customer, signing of joint meter records (JMR) and instructing the customer on use & safety norms, complete as per specifications & to satisfaction of owner / Engineer in Charge and includes supply of reinforced rubber hose with requisite pressure rating.Supply of Appliance valve is also included.
346	Upon supply and Complete installation of item’s and all its associated work.
347	After submission of documents and closure of contract.
348	Installation of ASTM A106, Gr. B, Seamless, BE , NB, XS pipes of various dia
349	- Erection, welding & Installation of CS pipes(sizes 1\\" to 4\\") & fittings (all types) including all types of Valves (Ball/Check/GLOBE) for piping for connectivity to industrial/ commercial customer. 1. Scope include required welding, painting, supply of all required gaskets, studs bolts & nuts etc.2. The Scope includes Supply & fixing of approved MS angle clamps, Ceiling clamps & dowel plugs with screws, supply and insertion of insulation material i.e. PVC, PTFE sheet between pipe.3. Other Required other material like CS pipe, elbow , bends, flanges,valve,NRV etc covered under respective SOR shall be seperately payable. 4. Payment of radiography of joints (4\\" and below ) shall be paid seperately under SOR item for RADIOGRAPHY.5. Cleaning and flushing by water/ compressed air, testing of the systems including hydrostatic, pneumatic and any other type of testing as specified, draining, drying by compressed air/other methods approved by EIC/RCM/Owner6. The Scope includes Restoring the wall surface to original conditions. Clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue material to Owner's designated plac(s); completing all works in all respects as per the AFC drawing, specifications, standards and other provisions of Contract and instruction of Engineer-in-charge.
350	NOTE :1) SOR 17.0 executed only prior approval from EIC / OWNER.2) If Consumer is ready / agree complete the work after outlet of MRS/Metering skid outlet (after outlet valve) to commercial/industrial appliance valve connection Contractor have to take quantity (Corresponds to SOR 18.0 to 35.0) approval from EIC / OWNER prior to order placement.
351	ASTM A106, Gr. B, Seamless, PE , 1/2\\" NB, S160 , their fittings and installation of meter and regulator (as applicable)
352	On fabrication of piping.
353	On erection, alignment, welding complete to achieve mechanical completion.
354	On flushing, testing, draining, drying, etc..
355	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
356	ASTM A106, Gr. B, Seamless, PE , 1\\" NB, XS , their fittings and installation of meter and regulator (as applicable)
357	On fabrication of piping.
358	On erection, alignment, welding complete to achieve mechanical completion.
359	On flushing, testing, draining, drying, etc..
360	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
361	ASTM A106, Gr. B, Seamless, PE, 1.5\\" NB, XS , their fittings and installation of meter and regulator (as applicable)
362	On fabrication of piping.
363	On erection, alignment, welding complete to achieve mechanical completion.
364	On flushing, testing, draining, drying, etc..
365	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
366	ASTM A106, Gr. B (Charpy), Seamless, BE , 2\\" NB, XS , their fittings and installation of meter and regulator (as applicable)
367	On fabrication of piping.
368	On erection, alignment, welding complete to achieve mechanical completion.
369	On flushing, testing, draining, drying, etc..
370	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
371	ASTM A106, Gr. B (Charpy), Seamless, BE , 3\\" NB,XS , their fittings and installation of meter and regulator (as applicable)
372	On fabrication of piping.
373	On erection, alignment, welding complete to achieve mechanical completion.
374	On flushing, testing, draining, drying, etc..
375	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
376	ASTM A106, Gr. B (Charpy), Seamless, BE , 4\\" NB,XS , their fittings and installation of meter and regulator (as applicable)
377	On fabrication of piping.
378	On erection, alignment, welding complete to achieve mechanical completion.
379	On flushing, testing, draining, drying, etc..
380	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
381	Note:a). Supply & Installation of required size of brass fittings (which are not included in SOR item 18.0 to 33.0) in all type of meters (supplied by GAIL GAS LTD. ) shall be in scope of contractor.b). All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, Contractor shall have to do end preparation without any extra cost. c). Payment of radiography of joints (4\\" and below ) shall be paid seperately under SOR item for RADIOGRAPHY mentioned elsewhere in this SOR 35.0d). All type of piping works shall be carried out as per piping material specification (PMS).e). Complete Carbon Steel Piping Work with painting including all fittings, flanges and supply of all required gaskets, studs bolts & nuts etc.
382	Supply of CARBON STEEL PIPES as per Technical Specification and as directed by EIC
383	ASTM A106, Gr. B, Seamless, PE , 1/2\\" NB, S160
384	On placement of order on sub vendor
385	On receipt of material at site and acceptance thereof.
386	On erection/installation, alignment, welding, grouting, painting, testing
387	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
388	ASTM A106, Gr. B, Seamless, PE , 1\\" NB, XS
389	On placement of order on sub vendor
390	On receipt of material at site and acceptance thereof.
391	On erection/installation, alignment, welding, grouting, painting, testing
392	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
393	ASTM A106, Gr. B, Seamless, PE, 1.5\\" NB, XS
394	On placement of order on sub vendor
395	On receipt of material at site and acceptance thereof.
396	On erection/installation, alignment, welding, grouting, painting, testing
397	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
398	ASTM A106, Gr. B (Charpy), Seamless, BE , 2\\" NB, XS
399	On placement of order on sub vendor
400	On receipt of material at site and acceptance thereof.
401	On erection/installation, alignment, welding, grouting, painting, testing
402	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
403	ASTM A106, Gr. B (Charpy), Seamless, BE , 3\\" NB,XS
404	On placement of order on sub vendor
405	On receipt of material at site and acceptance thereof.
406	On erection/installation, alignment, welding, grouting, painting, testing
407	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
408	ASTM A106, Gr. B (Charpy), Seamless, BE , 4\\" NB,XS
409	On placement of order on sub vendor
410	On receipt of material at site and acceptance thereof.
411	On erection/installation, alignment, welding, grouting, painting, testing
412	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
413	Supply of Pressure Gauges as per Technical Specification and as directed by EIC
414	RANGE 0-100 MBAR - 4\\"- DIAL SIZE
415	On placement of order on sub vendor
416	On receipt of material at site and acceptance thereof.
417	On erection/installation, alignment, welding, grouting, painting, testing
418	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
419	RANGE 0-1 BAR - 4\\"- DIAL SIZE
420	On placement of order on sub vendor
421	On receipt of material at site and acceptance thereof.
422	On erection/installation, alignment, welding, grouting, painting, testing
423	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
424	RANGE 0-4 BAR - 4\\"- DIAL SIZE
425	On placement of order on sub vendor
426	On receipt of material at site and acceptance thereof.
427	On erection/installation, alignment, welding, grouting, painting, testing
428	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
429	RANGE 0-6 BAR - 4\\"- DIAL SIZE
430	On placement of order on sub vendor
431	On receipt of material at site and acceptance thereof.
432	On erection/installation, alignment, welding, grouting, painting, testing
433	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
434	RANGE 0-30 BAR - 4\\"- DIAL SIZE
435	On placement of order on sub vendor
436	On receipt of material at site and acceptance thereof.
437	On erection/installation, alignment, welding, grouting, painting, testing
438	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
439	Supply of Strainers
440	Supply of Conical Strainer
441	As per Technical Specification and as directed by EIC.Note: - Conical Stainer may be free issue by Gail Gas Ltd., Its Discretion of Gail Gas Ltd. to excute the SOR or Free Issue the material.
442	On placement of order on sub vendor
443	On receipt of material at site and acceptance thereof.
444	On erection/installation, alignment, welding, grouting, painting, testing
445	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
446	On placement of order on sub vendor
447	On receipt of material at site and acceptance thereof.
448	On erection/installation, alignment, welding, grouting, painting, testing
449	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
450	On placement of order on sub vendor
451	On receipt of material at site and acceptance thereof.
452	On erection/installation, alignment, welding, grouting, painting, testing
453	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
454	On placement of order on sub vendor
455	On receipt of material at site and acceptance thereof.
456	On erection/installation, alignment, welding, grouting, painting, testing
457	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
458	Supply of Y Type Strainer
459	On placement of order on sub vendor
460	On receipt of material at site and acceptance thereof.
461	On erection/installation, alignment, welding, grouting, painting, testing
462	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
463	Supply of Check valve/NRVAs per Technical Specification and as directed by EIC.
464	1 1/2\\", 150# FE,FB
465	On placement of order on sub vendor
466	On receipt of material at site and acceptance thereof.
467	On erection/installation, alignment, welding, grouting, painting, testing
468	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
469	2\\", 150# FE,FB
470	On placement of order on sub vendor
471	On receipt of material at site and acceptance thereof.
472	On erection/installation, alignment, welding, grouting, painting, testing
473	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
474	3\\", 150# FE,FB
475	On placement of order on sub vendor
476	On receipt of material at site and acceptance thereof.
477	On erection/installation, alignment, welding, grouting, painting, testing
478	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
479	4\\", 150# FE,FB
480	On placement of order on sub vendor
481	On receipt of material at site and acceptance thereof.
482	On erection/installation, alignment, welding, grouting, painting, testing
483	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
484	Supply of FLANGES Weld Neck(End Thickness to match pipe thickness)
485	1\\" , 150#, B-16.5 , A105 ,125 AARH,SW,RF
486	On placement of order on sub vendor
487	On receipt of material at site and acceptance thereof.
488	On erection/installation, alignment, welding, grouting, painting, testing
489	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
490	1.5\\" , 150#, B-16.5 , A105 ,125 AARH,SW,RF
491	On placement of order on sub vendor
492	On receipt of material at site and acceptance thereof.
493	On erection/installation, alignment, welding, grouting, painting, testing
494	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
495	2\\",150#, B-16.5, A105 (Charpy), 125 AARH, RF
496	On placement of order on sub vendor
497	On receipt of material at site and acceptance thereof.
498	On erection/installation, alignment, welding, grouting, painting, testing
499	On completion of all activities and their acceptance, submission of final documents, final bill and acceptance of these by owner thereafter for successful closure of work order.
500	3\\",150#, B-16.5, A105 (Charpy), 125 AARH, RF

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents
10	Click here to download tender document	Tender Documents
11	Click here to download tender document	Tender Documents

Also Visit

Tenders

Karnataka Tenders

Construction Tenders

Pipe Line Project Tenders

Gas Pipe Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Hiring Contracts For Industrial And Commercial Connectivity For Gail Gas Limited, Bengaluru Cgd Project On Annual Rate Contract Basis For A Period Of One Year, Bengaluru-Karnataka

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Hiring Contracts For Industrial And Commercial Connectivity For Gail Gas Limited, Bengaluru Cgd Project On Annual Rate Contract Basis For A Period Of One Year, Bengaluru-Karnataka

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us