Tender For Annual Maintenance Plan - I For The Year 2026-27 Of (Neripul Tali Bhujjal ) Neripul Bharoli Pulbhal Road Km 0/00 To 14/565 (Sh :- Providing & Laying Wbm G-Iii For Correction , And Renewal Coat By Providing Bitumenous Concrete Of 30 Mm Thic, Rajgarh-Himachal Pradesh
TDR : 54890056
Tender Notice
BOQ
1 Days Left
Rajgarh
Himachal Pradesh
Tender For Annual Maintenance Plan - I For The Year 2026-27 Of (Neripul Tali Bhujjal ) Neripul Bharoli Pulbhal Road Km 0/00 To 14/565 (Sh :- Providing & Laying Wbm G-Iii For Correction , And Renewal Coat By Providing Bitumenous Concrete Of 30 Mm Thic
Name of Work:- Annual Maintenance Plan - I for the year 2026-27 of (Neripul Tali Bhujjal ) Neripul Bharoli Pulbhal road km 0/00 to 14/565 (SH :- Providing & Laying WBM G-III for correction , and renewal coat by providing Bitumenous Concrete of 30 mm thickness in Km 0/00 to 2/00 ).
Sl. No.
Item Description
1
Earth Work
2
Maintenance of WBM road including filling up of pot holes ,ruts and rectifying corrugated surface ,damaged edges and ravelling as per technical specification clause 1906 (one thousand nine hundred six) upto entire satisfaction & direction of Engineer-in-Charge, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges. By mechanical means.
3
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg (zero point two five to zero point three kilogramme) per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (five zero three) and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.
4
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 Percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects.
5
Providing and laying bituminous concrete 30mm (Thirty millimetre thick) with 100-120 (one hundred to one hundred twenty )TPH batch type hot mix plant with producing an average output of 75 (Seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 (Five point four to five point six )per cent of mix and filler, transporting the hot mix to work site of INDIAN OIL CORPORATION Ltd. and M /S HINCOL or equelant, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 . all leads,Lifts and carriage of materials complete as per entire saisification of the Engineer in Charge.
6
Providing and laying hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms Area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC. as per H.P.PWD. specsification, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts including all incidental charges. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
