|
| 1 | Site Clerance including labour and matrials and including grass cutting/Dressing and carrage of matrials by Head load |
| 2 | Dismenteling CC or granolithic floor with all comp S.L.No-697 |
| 3 | C.C. Work in 1:56:12 in cement, fine sand and 40 mm Gauge Brick Ballast including labour and matrials, T/P with all com. Work SI No. 273 |
| 4 | RCC work for slab with cement approved coarse sand & 20mm gauge dala stone grit in the proportion of 1:15:3 5.1. No. 288 |
| 5 | MS work in R.C.C. work including labour and matrials, T/P with all com. Work St No.504 |
| 6 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of Ist quality conforming to IS: 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown |
| 7 | M-150 B/W in 1:4 in cement and coar sand mortar including labour and matrials. T/P with all com. Work St No.305 |
| 8 | P.C.C. Work in 1:2:4 in cement, Coarse sand and 20 mm GaugeStone grit including labour and matrials, T/P with all com. Work SI No. 279(B) |
| 9 | MS work in Grill, Gate including labour and matrials, T/P with all com. Work SI No.503 |
| 10 | Scraping of old painting and colour white wash with disposal of refusedas directing by engineer with distance 6 mtr. |
| 11 | 12mm thick Plaster work in 1:3 in cement and fine sand mortar including labour and matrials, T/P with all com. Work Sl No.583 |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth |
| 13 | Finishing walls with water proofing cement paint of required shade: 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) 13.44 |
| 14 | Painting of Iron Work in Large Areas in one Coat of ready mix paint primer and one coat approved paint etc all comp. SOR No. 658 |
| 15 | Prelaminated particle board with one side decorative and other side balancing Lamination, flat pressed 3 layer & graded medium density) Grade 1, Type II conforming to IS: 12823 (exterior grade) 25 mm thick. DSR 9.6.3 |
| 16 | Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. DSR 9.12 |
| 17 | Providing and fixing wash basin with C.L. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls |
| 18 | P/F water closet squatting pan (indian type W.C. pan) with 100mm sand cost iron Por S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle level )confirming to IS 7231, with all comp work etc with all comp S.No-17.1.1 |
| 19 | terrace Provinding & Placing on Polythynlene water storage tank with cover & suitable Locking arrangement etc all comp. work |
| 20 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR 17.31)2018 |
| 21 | S/F of Internal Electrification Work T/P with all com. |
| 22 | S/F of Water supply And Sanitarry fitting Work T/P with all com. |
| 23 | Add 18% GST Please Enable Macros to View BoQ information |
