|
| 1 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of60 meters (200 feet). |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth up to 30 cm measured at a heightof 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earth work in excavation by labour, manual means in foundations trench or drain (not exeeding 1.5m in width or 10sqm on plan) excavated soil as directed within a lead of 50m incl. dressing of sides and ramming of bottom lift upto 1.5m incl. getting out the all kind of soil. |
| 4 | P/L of G.S.B with road aggregate including spreading in uniform thickness ,hand packing ,rolling with 3-wheeled steel/vibratory roller 8-10 tones in stages to proper grade and camber,applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregates,watering and compacting to the required density. |
| 5 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 Cement : 4 coarse sand (zone-III): 8 graded stone aggregate 40 mm (nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 7 | Brick work with common burnt clay (non modular) bricks of class-150in foundation and plinth in: |
| 8 | Providing and laying damp-proof course 25mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Construction of Shed with appropriate quantity and Quality of M.S. tubular pipes , trusses , purlins and covering the above area with modular style G.I profile sheeting also includes the iron work used in foundation as per K.N.N approved rates . |
| 13 | Side Covering of Shed all around surrounding with appropreate quantity and Quality of M.S. tubular pipes , trusses , purlins and with modular style G.I profile sheeting also includes the iron work used in foundation as per K.N.N approved rates . |
| 14 | Brick wutk with cuimriur\ hurnt clay (non modular) brlcks of class -150in superstructure above plinth level up to floor Vlevel in all shaees and sizes Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 15 | Providing and Laying of 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 16 | Finishing walls with Putty approved brand and manufacture and of requiredshade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 17 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applid @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work.for two coat. |
| 18 | Providing and laying virtified tile s in different sizes (thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS :15622 , of approved make , in all colours and shade , laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigment etc. complete |
| 19 | Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. |
| 20 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mmangle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approvedsteel primer.Using M.S. angels 40x40x6 mm for diagonal braces |
| 21 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integra type foot rests |
| 22 | Providing and fixing white vitieuus china flat back oi wall coinei type lippud fiui›t urinal basin of 430x2G0x350 mm and 340x410x2G5 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 23 | Providing and fixing Chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threated fittings, including fixing the pipes with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. internal work - Exposed on wall 32mm nominal outer dia pipes |
| 24 | Providing and fixing C.P brass bib cock of approved quality confirming IS:8931: |
| 25 | PVC water storage tank syntrex or equivalent |
| 26 | Supply and installation of 1.5 hp submerciblepump incl etc all comp. |
| 27 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit ,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. One light point with 5 Amp. switch. Group C |
| 28 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 29 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 40 to 50 Watt. Confirming to IP 65 protection complete in all respect.CAT-AA |
| 30 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver setsuitable for 15 Watt. to 25 Watt. Confirming to IP 66 protection complete in all respect.CAT-AA |
| 31 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 4 mm thick ACM sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 32 | Structural steel work in single section,fixed with or without connecting plate,including cutting, hoisting, fixing inposition and applying a priming coat ofapproved steel primer all complete. |
| 33 | Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.Same as in item 2 above but on new wood surfaces. Please Enable Macros to View BoQ information |
