|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed. |
| 2 | Dismantling of Stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, apron etc complete all as specified and directed. |
| 3 | M&L for Demolition Cement concrete concrete (unreinforced concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 4 | M&L for Demolition Reinforced Cement concrete of any description andin any position not otherwise specifically provided for complete all as directed |
| 5 | Taking down plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc etc complete all as directed |
| 6 | Taking down chowkhats or frames with shutters and (without taking off shutters from frames) n.exc 1.5 sq. m each |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each |
| 8 | Taking up or down steel tubing and connections, including removal to store etc all as directed for 15mm bore |
| 9 | ditto all as item 08 above but for 20mm bore |
| 10 | dittio all as item 08 above but for 25mm bore |
| 11 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)complete all as directed. |
| 12 | Demolition of stones or brick masonry or block walling, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 13 | M & L for RCC M 25 Design mix using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge |
| 15 | M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | M&L for Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed. |
| 17 | M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 (01 cement : 04 coarse sand) all as specified & directed. |
| 18 | M &L Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal wall surfaces). |
| 19 | M&L for Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed all as specified. |
| 20 | M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 21 | M&L for Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 22 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 square metre but not exceeding 0.11 square metre, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B1 quality over cement screed 1:4, 15mm thick applied with cement slurry at the rate of 3 kg / square metre complete all as specified and as directed. |
| 23 | M&L for Non ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 24 | M&L for Non-skid ceramic coloured tiles (matt finish), coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dado etc . set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed. |
| 25 | M &L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm stone aggregate) as in levelling course all as specified and directed. |
| 26 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:4. 10mm thick complete all as specified and as directed. |
| 27 | S&F ColouredGlazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:4. 10mm thick complete all as specified and as directed. |
| 28 | M & L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 29 | M&L for Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:6 (1 cement : 6 coarse sand), cutting, rubbing, grinding and polishing all as specified. |
| 30 | M&L for Machine cut kota stone slab flooring 14-16 mm thick as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps etc, laid over and including 10 mm rendering layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing complete, all as specified. |
| 31 | M&L for green marble work 18 to 20 mm thick (table rubbed and polished) & circular cutting at one end in steps, jambs,pillars, window, cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of including 15 mm thick screed bed in cement mortar 1:6 complete. |
| 32 | S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 33 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed. |
| 34 | S&F for 18/19 mm thick Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixedwith screws to timber frame work complete all as directed. |
| 35 | M&L for prepartion of new surfaces of wood and wooden based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete |
| 36 | S&F Butt hinges, Medium weight, cold rolled mild steel, 100mm size fixed with screws all as specified |
| 37 | S & F Aluminium handles, cast type, anodisedhandle 150 mm cast type anodized all as specified |
| 38 | S & F Aluminium tower bolt 150 mm size complete all as specified and directed. |
| 39 | Supply, fabricate and fixing in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position all as specified and directed. Note for Serial Item Nos 33 to 35:- (i) Section No given above are of Make-Jindal and are for guide line. (ii) The measurements shall be taken actual at site, any wastage shall be included in the rates quoted. (iii) The above sections shall be from any of makes of JINDAL/ INDAL/ HINDAL/ WALCO. (iv) MAKE OF GLASS:ATUL/ MODI GUARD/ SAINT GOBAIN. |
| 40 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm thick MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed. |
| 41 | Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2020 complete all as specified. |
| 42 | S&F 75mm size type C21 Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised complete all as specified. |
| 43 | S&F aluminium handle 125 mm cast type anodized complete all as specified. |
| 44 | S & F aluminium anodized tower bolt 125mm size complete all as specified and directed. |
| 45 | M&L for Complete Removal of existing water proofing treatment over roof including PCC of any thickness description in any position including cleaning the surfaces with wire brushing, watering and removing debris up to 1500 mtr distance etc complete all as specified and directed. |
| 46 | Material and Labour PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course using integral water proofing compound as per manufacturers instructions as in roofs complete all as specified and directed. Note:- WPC shall be measured & paid seperately. |
| 47 | M&L for Rendering in cement mortar 10mm thick in of 1:3 ratio on concrete surfaces of roof finished even and smooth without using extra cement to recive water proofing membarane mixed with integral water proofing compound as per manufactures all as specified and directed. Note:- WPC shall be measured & paid seperately. |
| 48 | Supply only integral water proofing liquid complete all as specified and directed. (@200ml per bag of cement) |
| 49 | M&L for prepartion of the plastered surfaces by thoroughly removing all loose particles, dirt/ dust particles and applying a uniform coat of hot blown bitumen of grade VG-10 @ 1.20 kg/Sqm confirming to IS 702 over a coat of water based bituminous primer @ 0.40 ltr/ sqm and laying APP based polymeric membrane as per IS 16540-2017/ IS 16532-2017 with overlap of 100mm minimum weighing 3.6 kg/ sqm and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/ sqm) by forced application and finally finsihed the memberance surface by applying a coat of solar refelective aluminium paint @ 0.1 ltr / Sqm complete all as per manufacturer's instructions as specified and as directed. |
| 50 | S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed |
| 51 | S&F Unplasticised PVC pipes and fittings of 20mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed |
| 52 | S&F Unplasticised PVC pipes and fittings of 25mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed |
| 53 | M&L for Cutting chases or making holes in brick walls for concealed water tubing, making good to facings where required, cutting not exc 10 cm girth all as directed |
| 54 | S & F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as directed. |
| 55 | S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repairs, all as specified. |
| 56 | S & F in repairs PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all accessories all as directed. |
| 57 | S & F in repairs of 2-in-1 Health faucet (ABS Body) mild steelchromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 58 | S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm excluding supply of taps, but including waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and flt nuts , flange end embedded in red lead cement and other end fixed , chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand , making connections to waste and supply pipes and complete all as specified and directed |
| 59 | S & F in repair vitreous china urinal half stall urinal type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as directed. |
| 60 | S & F in repairVitreous China urinals, bowl type (back or corner wall type), size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)t complete all as directed. |
| 61 | S&F 10 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. complete all as directed. |
| 62 | S&F in repairs 15 mm dia Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified amd directed |
| 63 | S&F in repairs 15mm dia stop valve/Angle valve/concealed cock , chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for PVC/iron pipes or for unions and fixed of,complete all as specified and directed. |
| 64 | S&F in repairs pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts, scewed for union pipe and fixed to 15mm dia pipe. |
| 65 | S&F in repair 15mm dia Swan neck type chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed. (Prayag CAT No : 9914) |
| 66 | S&F in repair in CP two way bib tap of 15mm dia. screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete all as specified and as directed. |
| 67 | S&F in Repair for 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete, all as specified. |
| 68 | S&F in repair for Gun metal globe or gate valves (ISI-marked), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union of 20 mm bore and fixed in repairs, complete all as specified and as directed. |
| 69 | S&F in repair PVC bib taps PTMT (Symet) 15mm dia (Any Colour) screwed down for iron pipem or for brass ferrule complete all as specified and as directed. |
| 70 | S&F in repairs 15mm dia Pillar tap standard of PTMT any colour screwed for iron pipe (minimum weight 15 mm -110 gm) complete all as specified and as directed. |
| 71 | S&F in repairs 15mm dia stop valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm) complete all as specified and as directed. |
| 72 | S&F in repairs 15mm dia angle cock/concealed cockof PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm) complete all as specified and as directed. |
| 73 | S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe ( minimum weight 40 gm) complete all as specified and as directed. |
| 74 | S&F in repair 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl taking down old all as specified and directed |
| 75 | S&F in repair 1000 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl taking down old all as specified and directed |
| 76 | S&F Ball valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball screwed for iron pipe of 25 mm bore (Minimum weight 455 gms )and fixed complete all as specified and directed. |
| 77 | S & F in repairs 20mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 78 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor, of 110 mm dia complete all as specified and directed. |
| 79 | S&F PVC (SWR) bends 110mm dia of any radius with access door |
| 80 | S&F PVC (SWR) branch piece, single (Y) equal or unequal 110 mm bore with access door. |
| 81 | S&F 75 mm bore PVC ( SWR) pipes of single socketed in any length with rubber ring joints fixed to floor all as specified |
| 82 | S&F 75 mm bore. PVC (SWR) bends |
| 83 | S&F PVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed |
| 84 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed. |
| 85 | S & F PVC connections 15mm size with PTMT nuts of length 600 mm,complete all as specified and directed. |
| 86 | S & F in repairs 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 87 | S&F in repairs tubular towel rail brass chromium plated, 20mm dia,, D type, 60cm long between flanges complete all as specified & directed.(Make : Prayag / COMMANDER) |
| 88 | S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated fixed to wall all as specified and directed |
| 89 | S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 90 | S & F in repairs sinks with drainage board made of stainless steel sheet 1mm thick for kitchen fixed with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as directed. |
| 91 | S&F for 32 mm dia HDPE pipes of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, all as specified. |
| 92 | S & F in repairs plastic water closet seat cover, black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 93 | Disconnecting and cleaning of HDPE tank of capacity exc 250 liter and n. exc 500 liters cleaning and removing all scale and dirtfrom wall and floors by rubbing with brushes, cleaning with caustic soda etc etc complete and finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc and refxing same position to adistance not exceeding 50m and deposting complete all as specified. |
| 94 | Disconnecting and cleaning of HDPE tank of capacity exc 500 liter and n. exc 1000 liters cleaning and removing all scale and dirtfrom wall and floors by rubbing with brushes, cleaning with caustic soda etc etc complete and finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc and refxing same position to adistance not exceeding 50m and deposting complete all as specified. Please Enable Macros to View BoQ information |
