Tender For Construction & Commissioning 2 Nos Single Phase 150 Mm Dia Tubewell With Pumping Machinary At Various Villages Block Talera, Distt. Bundi., Bundi-Rajasthan
TDR : 54888188
Tender Notice
BOQ
9 Days Left
Bundi
Rajasthan
Tender For Construction & Commissioning 2 Nos Single Phase 150 Mm Dia Tubewell With Pumping Machinary At Various Villages Block Talera, Distt. Bundi.
Name of Work:- Construction & Commissioning 2 Nos Single phase 150 MM Dia Tubewell with pumping machinary at Various Villages Block Talera, Distt. Bundi.
Sl. No.
Item Description
1
Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe.
2
Nominal bore 150 mm dia.
3
Add 15% extra on above item for drilling depth beyond 100 mtr and upto 200 mtr from ground level, Rates shall be applicable for only extra depth beyond 100 mtr upto 200 mtr.
4
Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes
5
150 mm dia NB (Thickness of pipe 5.0mm & mass of tube 20.13 Kg/m)
6
Supply & installation of single phase ISI mark submersible motor pump set of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9823-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cable up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.
7
Up to 2.0 KW
8
Supply & fixing of Electric feeder panel (having projected canopy) for submersible pump set Single phase up to 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 gauge M.S. Sheet with powder coating, Panel size Height 600 mm Width 500 mm depth 250 mm with Stand (made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18'' and double door including in built locking system. The legs should be equal or bigger than the base size of panel having height of at least 200mm from ground level. The operation of panel should be suitable for on 240 Volt AC Supply.
9
Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
10
3 core 4.0 Sq.mm
11
Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set.
12
Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.
13
150 mm dia
14
Providing & Laying ISI mark HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia including HDPE/fitting and PVC rope conforming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc, Complete in all respect.
15
40 mm dia Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
