|
| 1 | Earth work in hard soil in exacavation of foundation trenches within 50 m. initial lead and 1.5 m.initial lift including all costs of labour materials required for the work etc complete and as per direction of Engineer-in-charge. |
| 2 | Filling sand in foundation and plinth watering, ramming, consolidating and dressing labours tools, taxes etc all complete as per specification and direction of E.I.C. |
| 3 | Cement concrete (1:4:8) with 4 cm. Down grade size crusher broken hard granite metal laying in 150/100mm thick ramming. compacting to proper thickness., watering, curing. |
| 4 | Brick work in cement mortar (1:6) in Foundation and Plinth having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. |
| 5 | Brick work in cement mortar (1:6) in super structure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. |
| 6 | Brick work in cement mortar (1:4) in superstructure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. |
| 7 | Providing and laying reinforced cement concrete of M-20 grade with 20 mm and down grade black hard granite (Crusherbroken) chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. |
| 8 | Chajja |
| 9 | Roof Slab |
| 10 | Roof Beams |
| 11 | Pllilnth Beams |
| 12 | Footings |
| 13 | Cutting, bending, binding and tying the grills Placing in position of steel reinforcement. |
| 14 | 16 mm thick cement Plaster (1:6) over brick work including racking out joints finishing smooth with proper plumb and line watering curing for seven days. |
| 15 | 6 mm thick cement Plaster (1:4) to ceiling including racking out joints finishing smooth with proper plumb and line watering curing etc. complete. |
| 16 | 12 mm thick cement Plaster (1:6) over brick work including racking out joints finishing smooth with proper plumb and line watering curing .ete complete. |
| 17 | Priming one coat with any approved primer on new work to give an even shade including scaffolding and cleaning the surface before application etc. complete. |
| 18 | Painting two coat with anti-fungal weather coat water proofing paints on outer plastered |
| 19 | Wall painting two coats of Disempering of approved shade over wall putty including scaffolding and cleaning the surface before application. |
| 20 | Supplying, fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 21 | Supplying, fitting and fixing of openable PVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 22 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 23 | Supply and fixing of MS Grills in Windows & ventilators |
| 24 | Painting two coats of enamel paint over a coat of priming complete. |
| 25 | Supplying,fitting & fixing of Vetrified (anti skid) tiles including cost of al materials, Labour etc.complete. |
| 26 | Providing and fixing ceramic tiles of approved size in dado & Skirting over cement plaster 1:3, 12 mm thick jointed with neat cement slurry including cost of all material labour T & P etc. complete |
| 27 | Internal P.H.Cutting hole on brick wall for taking G.1 orv P.V.C pile for W/S line and mending good to damages as per P.H specification and direction of EIC (250mm. Thick Brick wall, Hole size(12cmx12cmx25cm) |
| 28 | Cutting holes through the brick or laterite, masonary wall for taking sand cast iron (SCI) pipes or A.C pipes (250mm to 375mm thick wall) |
| 29 | Cutting groves in pacca floor and walls for taking G.I/PVC pipes |
| 30 | Providing and laying in trenches UPVC-ASTM-Standard (Schedule-80)pipe of the following nominal bore and pipe fittings including testing as per specification complete. (Earth work in trenches to be measured and paid for |
| 31 | 20mm dia Pipe |
| 32 | 25mm dia Pipe |
| 33 | 25mm dia brass / GM ball valve |
| 34 | Providing and laying in trenches SWR pipe & fittings of the following nominal bore and pipe fittings including testing as per specification complete. (Earth work in trenches to be measured and paid for separately) |
| 35 | 75mm OD P.V.C. SWR D/S Pipe (ISI type-A) rain water pipe on roof |
| 36 | 75 mm dia P.V.C. SWR Vent Cowl |
| 37 | 110 mm dia P.V.C. SWR Vent Cowl |
| 38 | 110mm dia P.V.C. Nahani Trap with out Jally |
| 39 | 75 x 75 x 75mm dia PVC SWR Tee |
| 40 | 110 x 110 x 110mm dia. PVC SWR Tee |
| 41 | 110mm dia P.V.C. SWR P Trap |
| 42 | 75 mm dia P.V.C. SWR plain bend 45 |
| 43 | 110 mm dia P.V.C. SWR plain bend 45' |
| 44 | 75mm diaP.V.C. SWR door bend 87.5\\" |
| 45 | 110mm diaP.V.C. SWR door bend 87.5 |
| 46 | 110mm dia PVC SWR coupler |
| 47 | 110mm dia P.V.C. SWR D/J with door |
| 48 | 110 mm dia P.V.C. SWR plain bend 87.5' |
| 49 | 110mm diaP.V.C. SWR.pipe clip |
| 50 | Fixing 100mm size 'P' or 'S' trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. |
| 51 | Supplying, fitting & fixing of following cp fittings as per PH Specification and direction of EIC |
| 52 | 15 mm CP 2 in 1 Bib cock. |
| 53 | 15mm dia c.p.angular stop cock |
| 54 | 15mm CP concealed stop cock |
| 55 | 15mm dia c.p. pillar cock |
| 56 | big flange |
| 57 | 40 mm dia waste Coupling (F/T) |
| 58 | 40mmx1150mm long PVC corrugated waste pipe |
| 59 | 15mmx600mm PVC connection pipe |
| 60 | Supplying, fitting & fixing of following proceline item as per PH Specification and direction of EIC. |
| 61 | 22\\"x 16\\" (550x400) W.H.B |
| 62 | Flat back standing Urinal (Medium) |
| 63 | Urinal Spreader |
| 64 | Fixing glazed earthenware squatting plate of size 600mmx350mm conforming to IS 2556: Part 6-1995 with intigral longitudinal flushing pipe including embeding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard grabnite metal etc all complete as per specification. |
| 65 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. (10 litre capacity - White) |
| 66 | 32mm flush bend |
| 67 | Mirror Cabinet (350mm x 450mm) |
| 68 | towel rail |
| 69 | C.P.soap holder/disc. |
| 70 | RCC Ring Tank(Soak way pit) 1.20 m dia x 1.5 mtr deep |
| 71 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. [excluding earth work] (per each) |
| 72 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge. |
| 73 | Supplying all materials, labour and T&P for fitting fixing of following types of P.H. Fittings etc. all complete. |
| 74 | 25mm dia pvc ball cock with rod |
| 75 | supplying all materials,labour, T&P for fitting & fixing U PVC S.W.R pipes(4kg/cm2) and fittings of the following outside diameter including jointing with approved solvent cement by non-heat application method testing as per specification with lead of all materials to site. |
| 76 | 110mm dia P.V.C clamp |
| 77 | 110mm dia P.V.C cowl |
| 78 | 110mm dia P.V.C socket |
| 79 | 110mm dia P.V.C. SWR D/J with door |
| 80 | 110mm diaP.V.C. SWR door bend 87.5' |
| 81 | 110 mm dia P.V.C. SWR plain bend 87.5' |
| 82 | 110mm diaP.V.C. SWR.pipe clip |
| 83 | Fixing 100mm size 'P' or 'S' trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. |
| 84 | Supplying of 1 HP mono block pump set with its accessories |
| 85 | Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge. |
| 86 | Filling in foundatin and plinth with sand watered and rammed including cost of sand & labour within 50m. initial lead & 1.5m. initial lift as per direction of the engineer–in–charge. |
| 87 | Providing Cement concrete for unreinforced cement concrete works of proportion (1:4:8) with 4cm. Size crusher broken hard Granite(CBHG) metal of approved quality and from approved quarry in foundation bed and floors including cost of all labour, materials( inclusive of cost , conveyance, royalities, taxes, loading and unloading) & equipments for handing, transportion, batching, mixing, placing in position vibrating , curing for- days complete as per specificationdrawing and direction of the Engineer- in - charge with all taxes, lead,T & P etc all complete |
| 88 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in foundation and plinth complete as per specificationdrawing and direction of the Engineer- in - charge with all taxes, lead,T & P etc all complete |
| 89 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in foundation and plinth complete as per specificationdrawing and direction of the Engineer- in - charge with all taxes, lead,T & P etc all complete |
| 90 | R.C.C. work of M20 having minimum compressive strength (working stress) 200kg./cm2 in 15cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size (1/2” to 3/4”) crusher broken hard black granite chips of 20mm size (not to exceed 25%) of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 91 | Security Room |
| 92 | Roof Beams |
| 93 | Roof Slab |
| 94 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification |
| 95 | Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete. |
| 96 | 12mm tjick cement plaster with cement moatar of mix (1:6) with screened and washed sharp sand etc as per direction of EIC |
| 97 | Providing weather coat with approved quality and shade over a coat of cement ash plastered surface with brush ncluding cleaning the surface watering curing cost of paint taxes etc as per direction of EIC |
| 98 | Digital wall tile (make johnson,kajaria) |
| 99 | Antiskid floor tile |
| 100 | Supplying fitting fixing of M.s grill gates ms gates in all floors |
| 101 | Supplying fitting and fixing of two track upvc sliding window of approved size 6mm thick glass of approved quality complete with frame etc |
| 102 | Providing and fixing 20mm thick granite stone flooring for staircase trade riser and similar locations where ever required horizontal and verical approved colour texture with moulding edge etc as per direction of eic |
| 103 | FRP dustbin (penguine) capacity 100ltr size 4' ht 65\\" dia material FRP model no-FGU-13 |
| 104 | Providig all materials labour tp for laying of following dia rigid UPVC pipes as per IS4985/2000 with ISI mark of pressure ratting 8kgf/cm2 including fixing of required size UPVC fittings like bend tee., elbow, MTA,FTA etc with required jointing material and laying intrecnces etc |
| 105 | Providing all materials labour tp for fiitting fixing of gear driven pop up sprinkler having operating pressure up to 3kgf/cm2 & flow rqdaius nt less than 12 m & popup spray head having operating pressure 1kgf/cm2 & low radius not less than 5.5m Th sprinkler fitted with required nos of fiittins as per the existing site condition, HUnter/rainbird/nelson |
| 106 | Supplying and fixing of 80mm thick cement concerete interlocking paver block of M-40grade of approved size design and colour made by block making machine with proper compcation etc as per direction of EIC |
| 107 | Mural painting of sahll be painted on surface in attractive colours |
| 108 | Twoseated arched swing |
| 109 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 110 | Removing the Dimantle &excavated materials from site by mechanical means up to 5km lead with loading and unloading complete as per yhe direction of EIC |
| 111 | provision of photo sighn board etc other unforseen item Please Enable Macros to View BoQ information |
