Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | SCHEDULE- A: CPWD DSR 2023 Items |
| 3 | SCHEDULE- B: NDSR Items Note: 1. The Rates are to be quoted exclusive of GST. 2. In case of any discrepancy/dispute in respect of DSR items, the item description, unit and rates of standard DSR shall be applicable. |
| 4 | Basic items Rate (labour/material ) |
| 5 | Sub-head no. 2 Earth work Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 6 | Sub-head no. 4 Concrete work Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Sub-head no. 5 Reinforcement cement concrete work Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Sub-head no. 6 Masonry Work Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Sub-head no.8 Cladding work Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm. Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Sub-head no. 9 Wood and PVC work Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 11 | Sub-head no. 10 Steel work Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc. |
| 12 | Sub-head no. 11 Flooring Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 13 | Sub-head no. 12 Roofing Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm Coupler 110x110x110 mm Single tee without door 110 mm bend Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall haveNRC value of 0.50 (Minimum), light reflection > 85%, non- combustible asper B.S. 476 part IV, 100% humidity resistance and also having thermalconductivity <0.043 w/mK. |
| 14 | Sub-head no. 13 Finishing 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 15 | Sub-head no. 14 Repairs to buildings Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 coarse sand) Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge. The elevational area of the scaffolding shall be measured for payment purpose.The payment will be made once irrespective of duration of scaffolding. Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per directions of Engineer-in-charge. |
| 16 | Sub-head no. 15 Dismantling and Demolishing Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 17 | Sub-head no. 16 Road Work Supplying and stacking at site. Good earth Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as perdirection of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. 80mm thick C.C. paver block of M-30 grade with approved colour, design & pattern. |
| 18 | Sub-head no. 17 Sanitary Installation Providing and fixing wash basin with C.I/M.S. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White vitreous china wash basin size 630x450mm with a pair of 15 mm CP brass pillar taps Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia Flexible pipe 32 mm dia |
| 19 | Sub-head no. 18 Water supply Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes 50 mm nominal outer dia Pipes Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore 50 mm dia nominal bore Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases andmaking good the wall : 20 mm dia nominal bore metre Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and base support for tanks. |
| 20 | Sub-head No.21 Aluminium Work Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimumthickness of polyester powder coating 50 micron) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5mm depth and 5 mm width |
| 21 | Sub-head no. 22 Water Proofing Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer (dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. |
| 22 | Sub-head no 26 New Technologies and Materials Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer- In-Charge. |
| 23 | Total of DSR-2023 items (Sl. No. 2 to 18) |
| 24 | Any other DSR 2023 items as per requirement |
| 25 | Total of DSR 2023 items and Any other DSR 2023 items (Inclusive of GST) (Sl. No. 19 + Sl. No. 20) |
| 26 | Multiplied by the Correction Factor of 0.973 (As per CPWD Guideline) |
| 27 | Grand Total DSR 2023 items (schedule-A) (Inclusive of GST) (Sl. No. 1 + Sl. No. 22) |
| 28 | Grand Total DSR 2023 items (schedule-A) (Exclusive of GST) Item Description |
| 29 | Providing Sensor PCB of make Parryware Roca or similar or superior including GST and excluding service charges. |
| 30 | Providing Solenoid Valve of make Parryware Roca or similar or superior including GST and excluding service charges |
| 31 | Providing Battery Box of make Parryware Roca or similar or superior including GST and excluding service charges. |
| 32 | Service Charges for fixing spare parts in urinal like sensor PCB, Solenoid valve, battery box etc charges applicable per urinal. |
| 33 | Extra for providing 15 mm water saver CP Brass pillar cock (Jaguar PRS-031 or equivalent) in place of ordinary CP Brass pillar cock against tender item elsewhere. |
| 34 | Providing and Fixing mineral fiber acoustic false ceiling. (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 35 | Providing and fixing bottom patch fittings all complete (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 36 | Providing and fixing bottom lock patch all complete (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 37 | Providing and fixing pivot plate all complete (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 38 | SS handles Dorma for double leaf door complete in all respect (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 39 | Cleaning including Pumping out water from blocked sewer lines or otherwise by suitable sewerage pump of 5 HP all work completed as per direction of Engineer in charge |
| 40 | Providing and fixing euro file mortice lock-240 with double pin cylinder having master arrangement and SS handles complete in all respect - 2hrs. Fire rated. (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 41 | Providing and fixing wall hung / Sensor Urinal, integral battery operated, infrared censor operated flush with pre flush 250 ml, post flush 350 ml and concealed water inlet. Complete in all respect as per satisfaction of Engineer-in-Charge. |
| 42 | Providing and fixing concealed Cistern make Hindware (CONCEALO, 80 mm, complete set with flush plate or equivalent) / Jaguar (ACS-WHT-2400FS single piece clean concealed cistern with floor mounting frame, installation kit and S type drain pipe connection set for wall hung WC with flush plate or equivalent) as approved by Engineer-in-Charge. |
| 43 | Providing and fixing toilet paper holder with lid stainless steel as per direction of Engineer-in-charge. Make Hindware, Anika or equivalent. |
| 44 | Waterproofing with Apcon bond 131 of apex make or equivalent fill the joints at various place eg. Cladding and tiles or between floor tiles and jaali. |
| 45 | Providing and laying 160 mm dia 6 kg pressure PVC pipe for drainage all works completed as directed by engineer-in-charge |
| 46 | Providing and fixing in position poly sulphide sealent upto 3cm*3cm thick in all locations including separation/expansion/seismic movement joints and preparation of surfaces and edges, applying appropriate primer, back stop, bond preventive material/tape, masking tape, applying the sealant and tooling the same to correct shape and dimensions, specifications and manufacturer's recommendation and as directed by Engineer-in-charge. |
| 47 | Supply of JCB |
| 48 | Cleaning of Tensile roof with water and suitable chemicals/detergent at different Metro Stations as per direction of Engineer-in-Charge |
| 49 | Providing and injection of poly urithrine BASF master inject 1315 Part A and Part B or Chrysopoly grout or equivalent, grouting as per approved method statement and as per direction of Engineer in-charge |
| 50 | Providing and injection of Epoxy, BASF, SIKA, FOSROC, NORMET or equivalent grouting as per approved method statement as per direction of Engineer-in-Charge |
| 51 | Supply and fixing of NRV nozzles, on concrete surface as per direction of Engineer-in-Charge |
| 52 | Providing and laying 30mm thick mirror polished Sadarhalli grey/cheema pink/ Jhalore belge granite stone work of upto and including size of 1200mmX600mm of approved colour pattern with 4mm grove all around at all levels for wall lining/columns/skirting(veener works) by mechanical arrangement with SS clamps/ brackets anchor bolts 6mm vertical SS pins of approved make and inserts as per drawings and specifications. The cost of making neccesary groves all around stone places, Chamfering of corner edge and polishing are included. |
| 53 | Providing and installing suspended ceiling system at all levels with interlocking grid of size 1200x6000mm / 600x600mm ceiling module of size (1250x600) consisting of demountable infill units (size 1200x600x1.2mm) having 50mm gap at every 1200mm, gap covered with 82mm wide channel having flanges to hold ceiling panels. The panels and channels shall be made from 1.2mm thick GI sheet, punched and bent to shape. The panels shall have perforated area 30-40%. The ceiling shall be powder coated (PPC, 80micron) on exposed and unexposed surface with approved color. The grid system shall include hangers and runners of size 50x50x3mm thick hot dip galvanized steel, fixed on soffit of slab with the help of stainless-steel expansion fasteners of size 10x75mm (Tam Anchor), The ceiling system to include panels, hanging system including the cost of providing opening and electrical fittings/fixtures, secondary supporting system for opening and below cable tray and duct, access to maintenance, all complete as per requirement of Engineer-in Charge. |
| 54 | Providing and fixing Armstrong vertical baffle ceiling made out of aluminum extrusion in aluminum alloy grade 6063. The baffle blade shall be in size of 100X25X3600mm in RAL shade with c/c spacing 150mm. The baffle blade shall be suspended using slotted curved U profile at on Centre spacing in multiples of 25 mm. Longer length of baffle to be connected by baffle joiner and the ends to be fixed with end caps. Installation of U grid: The U profile to be suspended at every 1200mm on center using 6mm threaded rod from the structural soffit using U profile hanger. U profile spliced to be used to join more than one U profile of length 3.75mtr. 1st U grid channel must be no more than 400 mm from the perimeter. Installation of Armstrong Baffles: Locate the slot for baffles hangers in slot of baffle section at 1200mm centers. Hanger are inserted into the slot, then rotated 90 degree and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U grid channel. Each hanger to be Secured into position by inserting the locking clip. Baffle blade to be connected at end with baffle joiner, which are inserted into the top and bottom slots of the baffle closed profile for alignment only. The bottom joiner to be located first and fastened on one side only. The top joiner to be fitted then and secured with grub screw on one side. Then the 2 baffle section shall be joined and the top joiner is screw fastened on the second baffle profile. End caps to be located by pushing the end cap tongues into baffle slots. linear baffle ceiling curve baffle ceiling |
| 55 | Providing and fixing grab bar 600mm as per approved make (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 56 | Providing and fixing CP Brass long body Bib Cock lSl marked and of 15mm nominal bore (weight not less than 810 gms) complete in all respect (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 57 | Providing and fixing 15mm nominal bore, CP Brass Bib Cock (short body) conforming to lS:8931 (having a minimum weight of 400 gms) complete as required. (Model and specifications similar to existing at site and as per direction of Engineer-in- Charge) |
| 58 | Providing and fixing heavy duty door closer (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 59 | Providing and fixing health faucet complete in all respect (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 60 | Providing and fixing of Tactile indicator made from SS-316 grade stainless steel with mirror finish. This Tactile should be rich / best quality. All the indicator shall be installed into correctly drilled holes and place using suitable adhesive. All the indicators shall be aligned properly. Note: - The rates include all materials, Labours, tools, plant and equipment. Nothing shall be paid extra. Warning Tactile indicator – Shall be installed on the walking surface in a raised grid pattern of ‘dots’ or studs. They shall be placed at center to center placing of 61mm, measured along one side of a square arrangement. Minimum 10 studs to be placed in direction perpendicular to the direction of travel. This shall be 20% of the total quantity. Size – 35mm dia. x 4.5mm ht Underside - 10mm dia stem. Directional Tactile indicator – They shall be installed on walking surface, consisting of series of raised bar, oriented in line with direction of travel as per approved drawing. Min 4 bars to be placed in direction perpendicular to distance of travel. This shall be 80% of the total quantity. Size – 35mm wide x 4.5mm high x 288mm long Underside – 3x15mm, |
| 61 | Providing and fixing Water Closet (European Type), Wall hung of make Hind ware (LARARIMLESS- CAT.NO. 20069, Size 53.5 x 38 x 37 cm, star white colour/ ESSENCE-Size 55 x 37.5 x 37. cm, CAT.NO. 92051, star white/ Crystal-size 60 x 36 x 40 cm, Cat. No. 20047, Star white or equivalent)/ Jaguar (Queens Cat No. QNSWHP 7951, With UF seat cover Hinges, Accessories sets complete or equivalent/ KUBIX Cat No. KX-WXT-35951 with UF seat cover hinges accessories complete)/ Parryware (QUBEX Cat. CH44H/HAVENA N / CASCAD N x T, cat. no. C0207 or equivalent) / CERA(Carnival 2030 CR EWC Wall hung P clean Rim 2306 CANDY soft close seat cover outlet gasket / in let gasket complete with white colour or equivalent) or any brand as approved by Engineer-in-Charge. |
| 62 | Providing, supplying, erecting and fixing in position 3mm thick corrugated clear Polycarbonate sheets of approved make texture and colour for Sky light. The corrugation Profile shall match with the profile of roof sheets, including capping and fixing to roof sheets and steel girts by same fasteners as used by roof sheeting, minimum end laps of 200 mm sealing of laps with silicon sealant, water tight complete in all respects as per direction of Engineer-in-Charge. (Payment shall be made on laid plan area of polycarbonate sheet excluding end caps between sheets.) |
| 63 | Providing and fixing 30 mm thick Honed Granite Stone on Stair case treads and landings including bull nosing, (rounding the nose and making groove in tread) of steps not exceeding 32 cm in width of any approved colour and shade (Jeerawal white/P white etc or any), size and pattern, (sample of granite stone shall be approved by Engineer-in-charge) backing filled with chemical adhesive of approved make (BAL Endura / Duo-Bond / Laticrete/ Bafer of diamond rated / Star) complete as per specifications and relevant architectural drawings. There should be minimum gap between stones, and the gap should be grouted with higher polymer epoxy grout of make (BAL Endura / Duo-Bond / Laticrete/ Bafer - mappai of diamond rated / Star), The Rates include all materials (Granite Stone, Chemical Adhesive, Epoxy grout and all necessary materials required to complete the job), labour, tools, plant and equipment.Nothing shall be paid extra. Deduction in rates of fixing of granite stone of 18 mm / 25 mm / 30 mm using with cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. in place of chemical adhesive and epoxy grout mentioned in above items. Note : The Rate of fixing of granite stone with chemical adhesive and epoxy grout shall be higher side. |
| 64 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 25 mm thick Granite stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed withpigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of any colour and shade (Jet Black/Cherry Red/Elite Brown/Tan Brown/Lakha Red/Cat eye/Jeerawal White/Pwhite etc). |
| 65 | Providing and fixing 15mm th. Calcium Silicate tiles only on existing Grid frame of approved make and shade (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 66 | Providing and fixing 12mm th. Calcium Silicate board only on existing frame including the paint finish. (Model and specifications similar to existing at site and as per direction of Engineer-in-Charge) |
| 67 | Providing and fixing Aluminum composite panels in all colours of aluco bond /alpolic or any other approved equivalent for external/internal wall cladding at all heights and elevations including necessary aluminum composite panel consisting of 3mm thermoplastic core of anti-oxidant LDEP sand witched between two skin of 0.5 mm thick alloy sheet thickness of 4mm. the surface shall be finished with PVDF base coating on top side and service coating on reverse side shall be with a polymer to ECCA of AMMA. The system shall be designed to withstand wind pressure of 200 Kg/sqm and shall be fixed to masonry/ RCC walls with necessary clamps, brackets and anchor fasteners. |
| 68 | Providing and laying Red carpet of approved quality fiber foam specified weight approx. @ 0.70 Kg per sqm and as per direction of Engineer-in-Charge |
| 69 | Providing and fixing 12mm thick toughened glass complete as per directions of Engineer-in-charge. |
| 70 | Providing and installing 2 sheet of 6mm thick toughened glass with nominal gap sealant joint. Glass shall be clear toughened and laminated with 1.52 mm thick polyvinyl butyral layer-all complete with cut out & holes as per directions of Engineer-in- charge. The rates include all materials necessary accessories, labor, tools and plants. Nothing shall be paid extra for this item. |
| 71 | Providing and fixing toilet mirror in 6 mm thick clear float glass with bevelled and polished at edge, fixed on wall with 6mm thick hard board backing fixed to wooden cleats with 8mm dia 38 mm long stainless steel stud complete as per directions of Engineer- in-charge. The rates include all materials, necessary accessories, labor, tools and plants. Nothing shall be paid for extra for this items. |
| 72 | Providing and fixing 6 mm thick lacquered glass of color and shade approved by Engineer in charge. The silicone/tape should not react with coating on glass. The lacquered glass must be made industrially; must be opaque. The rates include all required holes, any rinding, bevelling, polishing, necessary accessories, materials, labour, tools and plants. |
| 73 | Providing and fixing 3M(TM) frosted film glass lift shaft. The films have a transparent synthetic liner in a dusted crystal finish in translucent white ( 2 mil) or translucent frosted crystal finish (3.8 mil) in five colors-all complete as per directions of Engineer-in- charge. The rates include all materials, necessary accessories, labor, tools and plants. Nothing shall be paid extra for this items. |
| 74 | Providing supplying and fixing 6 mm clear toughened +1.52 pvb + 6mm clear toughened black painted with hole and cut out complete as per directions of Engineer-in-charge. The rates include all materials necessary hardware. |
| 75 | Providing supplying and fixing 6 mm reflective toughened +12 mm air gap+ 6mm clear toughened DGU glass with hole and cut out complete as per directions of Engineer-in-charge. The rates include all materials necessary hardware. |
| 76 | Ozone make glass to glass hinges with fixing complete including all necessary accessories complete as per directions of Engineer in-charge. |
| 77 | Ozone make floor machine(8400) with fixing complete including all necessary accessories complete as per directions of Engineer in-charge. |
| 78 | Providing and fixing 5 mm thick black reflective toughened glass. The weather silicone shall be filled between four side of glass corner etc. complete as per directions of Engineer-in-charge. |
| 79 | Extra for providing Ceramic Coating designed as per desired and approved colours as per RAL code colour, over glass double deposition of ink on vacuum table of size bigger than 2500x1500 for precision holding of glass including the cost of transportation loading and unloading etc and the coating shall be smooth /texture as per approved architectural drawing and specification in all respect as per instruction of Engineer-in-charge. |
| 80 | Programmes and functions (arrangement of chairs, stage, decorations etc) conducted by UPMRC on various occasions as per direction of Engineer-in-Charge Sofa for Two Seaters Centre Table with cover High Back chair with cover & bow Steel Chair with velvet pads with cover (velvet lagi steel kursi +cover) Dining Table with cover (khane wali maze + cover + border) Drum Takhat Mat Curtained Wall (tent cloth se wall parda)12*18 or 8*18 Tent for Halvai kitchen |
| 81 | Supply & Installation of heavy duty door mat of specified thickness 15-20 mm and as per direction of Engineer-in-Charge |
| 82 | Supply of Jaquar Bottle trap size 769L 300*190 or equivalent as per direction of Engineer-in-charge |
| 83 | Supply of Jaquar Waste Coupling 705L130 or equivalent as per direction of Engineer-in-charge |
| 84 | Supply of Jaquar Cistern Plate 352415 or equivalent as per direction of Engineer-in-charge |
| 85 | Supply of Jaquar Ball Cock or equivalent as per direction of Engineer-in-charge |
| 86 | Supply of Jaquar Health Faucet stand or equivalent as per direction of Engineer-in-charge |
| 87 | Supply of Jaquar Basin Mixer Knob/spindle head or equivalent as per direction of Engineer-in-charge |
| 88 | Supply of 5 inch Stainless steel floor jali as per direction of Engineer-in-charge |
| 89 | Repair of Chairs Visitor Chair Cloth Change with material and foam paste Chair seat ply change Chair back ply change Frame Welding Iron Frame Welding Chair Hydraulic Repair Chair Repair |
| 90 | Supply of 10mm multiwall polycarbonate sheet Total of Schedule-B (NDSR items) (Inclusive of GST) Total of Schedule-B (NDSR items) (Exclusive of GST) GRAND TOTAL (SCHEDULE A+ SCHEDULE B) (Inclusive of GST) GRAND TOTAL (SCHEDULE A+ SCHEDULE B) (Exclusive of GST) ANNEXURE-9A PROFORMA FOR STATEMENT OF MINOR DEVIATIONS (Refer Clause C 15.1 of ITT) The following are the particulars of minor deviations from the requirements of the Tender Document: Sr. No Clause Deviations Price adjustment for withdrawal of each deviation/s Note: |
| 91 | The Tenderer shall indicate price adjustment against each deviation in Annexure- 13A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer. |
| 92 | Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents. |
| 93 | If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Annexure, it will have no effect. Signature of authorized signatory on behalf of Tenderer Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
