|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, all as specified and as directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required superficial area exc 150 sqcm but not exc 400 sqcm complete all as specified and as directed. |
| 4 | Taking down chowkats with shutters (without taking off shutters from frames) area of opening exc 1.5 Sqm but not exc 4 sqm each complete all as specified and as directed. |
| 5 | Dismantling of cast iron drain pipes, of 100mm internal dia fixed to wall or laid under floors complete all as specified and as directed. |
| 6 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required superficial area not exc 150 sqcm complete all as specified and as directed. |
| 7 | Material and labour for applying two coats of brush bond of M/S Fosroc or equivalent all sides and bottom of sunken slab and providing 10 mm thick cement mortar 1:3 with water proofing liquid. Mix the part A and B of the polymer modified cementitious coating mechanically using an electrically operated drilling machine fitted with paddle. apply the same in two over the prepared surface one after the other dries up with a minimum interval of 4 hours between the coats. Providing pressure grouting in suspected areas of vertical and horizontal joints. The rate shall include all materials, machinery, labour etc. complete all as specified and as directed. Note: 10 Years Guarantee certificate to be submitted by contractor. |
| 8 | Material and labour for cement concrete, 1:5:10, type E-2, using 40mm graded stone aggregate as in filling under sunken floors complete all as specified and as directed. |
| 9 | Material and labour for 40 mm thick PCC 1:2:4, type B1, using 20 mm graded stone aggregate as padding concrete in Sunken floor, finished even and smooth without using extra cement complete all as specified and as directed. |
| 10 | Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4, all as specified and as directed. |
| 11 | Material and labour for rendering/ backing coat 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces to receive wall tiles, all as specified and as directed. |
| 12 | Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. keeping 3mm wide tile joint set in neat cement slurry set and jointed in neat cement slurry and pointed in white or coloured epoxy joint filler MYKLAT KRETE SP 100 (Part A, B & C) or equivalent make to match the shade including filling around floor trap to arrest seepage leakage complete all as specified and as directed. |
| 13 | Material and labour for Glazed ceramic tiles in vertical surface 350x250x7mm/ 450X350X7mm thick set and keeping 3mm wide jointed in neat cement slurry and pointed in white or coloured epoxy joint filler MYKLAT KRETE SP 100 (Part A, B & C) or equivalent make complete all as specified and as directed. |
| 14 | Taking down door shutters of any description exc1 sqm and not exc 2 sqm each and re-fixing in same opening, all as specified and as directed. |
| 15 | Demolition of stone slabs and tiles of any description or thickness, laid bedded & pointed in any mortar in floors, aprons, kitchen slabs etc. all as specified and as directed. |
| 16 | Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like on 15mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, all as specified and as directed. |
| 17 | Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, all as specified and as directed. |
| 18 | Material and labour for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, 1:6 type C-1 1:3:6 (using 20mm graded stone aggregate) complete, in walls, all as specified and as directed. |
| 19 | Material and labour for 10mm thick rendering (1:6) and making surface even and smooth without using extra cement all as specified and as directed |
| 20 | Material and labour for preparing newly plastered surfaces of wall & applying two coats distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer complete, all as specified and as directed. |
| 21 | Supply and fixing in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing in the slab and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete, all as specified and as directed. |
| 22 | Supply and fix 40mm dia Waste coupling of PTMT (half or full threaded), all as specified and as directed. |
| 23 | Supply and fixing in repairs vitreous China wash basin, white, flat back, size 550x400mm or nearest available size as approved including waste coupling, chain, plug and brackets complete, all as specified and as directed. |
| 24 | Supply and fixing in repairs 15mm bore fancy type Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms), all as specified and as directed. |
| 25 | Supply and fixing in repairs 15mm bore long body tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-120gms), all as specified and as directed. |
| 26 | Supply and fixing in repairs 15mm bore fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-120gms), all as specified and as directed. |
| 27 | Supply and fixing in repairs 15mm bore fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, all as specified and as directed. |
| 28 | Supply and fixing in repairs 15mm bore chromium plated fancy type angle stop valve with wall flange complete, all as specified and as directed. |
| 29 | Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, all as specified and as directed. |
| 30 | Supply and fixing in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, all as specified and as directed. |
| 31 | Cutting channels, grooves or rebates not exc 15cm girth, and trimming surface, with or without reinforcement complete in all respect, all as specified and as directed. |
| 32 | Supply and fix 40mm Un-plasticised PVC pipes of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc.,complete all as specified and as directed. |
| 33 | Supply and fix Grating square 150 mm size with waste hole of PTMT (Minimum weight 100gms), all as specified and as directed. |
| 34 | Supply and fixing in repairs 75mm PVC (SWR) floor trap, with CP grating including jointing with solvent cement complete in all respect all as specified and as directed. |
| 35 | Supply and fix 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified., including taking down old steel tubing of 20mm dia, all as specified and as directed. |
| 36 | Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with Stainless Steel step clamps of suitable size with nuts and bolts etc. as per the requirement at site and fixed to walls/ laid in floors all as specified and as directed. |
| 37 | Supply and fix 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal & provided with access door complete, all as specified and as directed. |
| 38 | Supply and fix 110mm bore PVC (SWR) L bends any radius and provided with access door complete all as specified and as directed. |
| 39 | Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 40 | Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length as per the requirement at site and fixed to walls/ laid in floors all as specified and as directed. |
| 41 | Supply and fix 75mm bore PVC (SWR) junction single, (Single Y) equal or unequal and provided with access door complete all as specified and as directed. |
| 42 | Supply and fix 75mm bore PVC (SWR) L bends any radius and provided with access door complete all as specified and as directed. |
| 43 | Supply and fix 75mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 44 | Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white including 'P' or 'S' trap 100mm dia plastic water closet seat, black or white, closed pattern with flat bottom, seat cover and mild steel chromium plated or aluminised hinging device.(including fixing bolts but excluding flushing cistern and flush pipe), all as specified and as directed. |
| 45 | Supply and fixing in repairs 10 litres capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe, all as specified and as directed. |
| 46 | Supply and fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm, all as specified and as directed. |
| 47 | Supply and fix Fibre Glass Reinforced plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete all as specified and as directed. |
| 48 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified and as directed.. |
| 49 | Supply and fix butt hinges 100mm , medium weight, cold rolled and mild steel and fixed, all as specified and as directed. |
| 50 | Supply and fix 100mm aluminium handles, cast type, anodised, all as specified and as directed. |
| 51 | Supply and fix 150mm aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and as directed. |
| 52 | Supply and fixing in repairs brass chromium plated shower rose 125 mm dia with 190 mm long arms, swivel joints including fixing to steel/ CPVC pipe or union, all as specified and as directed. Make : Jaquar Cat Part No 495 & 483 or equivalent as approved by GE. Please Enable Macros to View BoQ information |
