|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 3 | S&F Glazed ceramic tiles coloured in vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 4 | M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc in cement mortar 1:6 complete all as specified and directed. |
| 5 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed. |
| 6 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed. |
| 7 | S & F 16-18 mm thick Granite (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and mica in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 8 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 9 | M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes etc in cement mortar 1:6 complete all as specified and directed. |
| 10 | Taking down cement or cement lime plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick on surface other than fair faces of brick work or concrete surfaces or on stone masonry surfaces or on one side of lathing in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 1-2 mm thick wall care putty complete all as specified and directed. |
| 13 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement complete all as specified and directed. |
| 14 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 15 | M&L for Complete removal of existing treatment on surface of wall and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 1-2 mm thick wall care putty complete all as specified and directed. |
| 16 | M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed. |
| 17 | M&L for preparation of old painted wooden surfaces exc. 10 cm width and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 18 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge. |
| 19 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge. |
| 20 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 21 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 22 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 23 | S&F in replacement of 15mm bore angle valve with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified and directed. |
| 24 | S&F in replacement of 15mm Bib Tap long nose with wall flange, chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and as directed. |
| 25 | S&F in replacement of Hat pegs, Aluminium solid body, 125mm to 175mm complete all as specified & directed. |
| 26 | S&F in replacement of 15 mm bore brass, chromium plated, sink mixer (wall mounted with 170 mm long swivel spout and wall flange, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe. (Make: Cat No : F2008501 of Cera or equivalent make) |
| 27 | M&L in replacement of for 75mm dia PVC floor trap, with grating including jointing with solvent cement, complete all as specified and directed. |
| 28 | S&F in replacement of for 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 29 | S&F in replacement of for 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 30 | S&F in replacement of for 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. |
| 31 | S&F in replacement of for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 32 | S&F in replacement of sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 33 | S&F in replacement of plate rack of size (24\\"X36\\"X10\\") including fixing of screws complete all as specified and directed. (Cat No P-336 of Make : Prayag or equivalent) |
| 34 | Demolition of reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 35 | M&L for RCC (Nominal Mix) type B1, 1:2:4, using (20 mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 36 | S & F Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab and hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed. |
| 37 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc and flat fair finished surfaces, complete all as specified and directed. |
| 38 | S&F Providing Kitchen/cupboard cabinet with shutter complete in required sizes made out of 18 mm thick one side decorative lamination & other side white balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters and panels made out of 18 mm thick one side decorative laminated PVC sheet all brackets 5.5 mm screws etc. All the edges shall be covered with 2 mm thick PVC edge bonding tape of 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge complete all as specified and directed. |
| 39 | All same as per Item No 38 here-in-above, but both sides white lamination complete all as specified and directed. |
| 40 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\\"x20\\"x4\\" ccomplete all as specified and directed. |
| 41 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\\"x20\\"x6\\" complete all as specified and directed. |
| 42 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\\"x20\\"x8\\" complete all as specified and directed. |
| 43 | S&F stainless steel modern cup and saucer basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\\"x20\\"x4\\" complete all as specified and directed. |
| 44 | S&F stainless steel modern perforated cutlery basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\\"x20\\"x4\\" complete all as described and as directed. |
| 45 | S&F stainless steel modern thali basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18\\"x20\\"x8\\" complete all as specified and directed. |
| 46 | S&F 60cm long stainless steel telescopic channels for sliding modular kitchen racks complete all as specified and directed. Make: Godrej or equivalent make as approved by Engineer-in-charge. |
| 47 | S&F stainless steel L hinges complete all as specified and directed. |
| 48 | S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws complete all as specified and directed. |
| 49 | S&F magnetic catcher complete all as specified and directed. |
| 50 | Demolition of brickwork/stone boulders, masonry built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone works & precast concrete surfaces all as specified and directed. |
| 51 | M&L brick work with sub class 'B' bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed. |
| 52 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 53 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking in credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed |
| 54 | Taking down un-serviceable DB of any size and capacity including MCB etc. and removing materials to store for keeping in safe custody or for taking in credit and making good disturbed surfaces of walls, floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. |
| 55 | Taking down un-serviceable sub main wiring with copper/aluminium conductor, PVC insulated unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire complete all as specified and directed. |
| 56 | M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuit) with multistranded copper conductor 1.5 sqmm nominal cross sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts Grade, ISI-694 marked with valid CML No. in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with, including steel box of required module for fixing of modular switches, sockets and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for one way switch One light/fan/bell point controlled by the one way switch complete all as specified and directed. Note:- surface conduit shall be laid in ceiling portion only. |
| 57 | All as per Item No 56 above but for one 3 pin socket outlet 5 amps on the same board with other switches complete all as specified and directed |
| 58 | All as per Item No 56 above but for one 3 pin socket outlet 5 amps on the independent board complete all as specified and directed |
| 59 | All as per Item no. 56 above but for 15 Αmps 5/6 pin socket point on independent board with 4 sqmm PVC insulated FRLS multi-stranded copper conductor with 4 Sqmm PVC insulated FRLS multistranded copper conductor as earth wire complete all as specified and directed. |
| 60 | Supply and Fixing Modular switch 1 way 6A,1 module complete all as specified and directed. |
| 61 | Supply and Fixing Modular switch 1 way 16A,1 module complete all as specified and directed. |
| 62 | Supply and Fixing Modular socket, 6A-2/3 pin combined 2 module complete all as specified and directed. |
| 63 | Supply and Fixing Modular socket, 6A/16A-2/3 pin combined 2 module complete all as specified and directed. |
| 64 | Supply and Fixing Modular White cover plate with frame ,4 module complete all as specified and directed. |
| 65 | All as per Item no.64 but 3 module complete all as specified and directed. |
| 66 | All as per Item no.64 but 6 module complete all as specified and directed. |
| 67 | All as per Item no.64 but 8 module complete all as specified and directed. |
| 68 | S&F Submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire af RM 1100V grade FRLS PVC insulated muti stranded copper conductor, single core cable conforming to IS 694 drawn through concealed conduit and connected to common earth dolly complete all as specified and directed. Note : Three runs of 4 Sqmm shall be measured as one length for the purpose of measurement. |
| 69 | Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 70 | Supply and fixing of pride plus inverter LED batten 20 Watt 6500K 230 Volt with square profile and polycarbonate channel Lithium ion battery with charging time 8 hours - 10 hours and back up time upto 4 hours complete all as specified and directed by Eng-in-charge.(Make: Cat part no. LHEXACP7FN1W020 of make havells or equivalent in crompton/Bajaj/Wipro) |
| 71 | Supply and fixing LED light fitting 1x 20W 220V AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and connecting up with twin core twisted flexible copper conductor cable with twin core conductor suitable to taking down old fittings complete all as specified and directed. |
| 72 | Supply and fixing Ceiling rose, surface bakelite, 65 x 50 mm three terminals, 230 Volts complete all as specified and directed. |
| 73 | Supply and fixing Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar SPN 8 way 240 V for fixing MCBs complete all as specified and directed. |
| 74 | Supply and Fixing MCB SPN B Curve 10KA 40 Amps complete all as specified and directed. |
| 75 | Supply and Fixing MCB SP B Curve 10KA 5 to 32 Amps complete all as specified and directed. |
| 76 | Supply and fixing Blanking plate for filling gap of MCB complete all specified and directed. |
| 77 | Supply and fixing Blanking plate for filling gap of switches any type complete as specified and directed. |
| 78 | Supply and fixing Lamp holder, insulated body with back plate, 230 Volts for batten fittings including taking down old one complete all as specified and directed. |
| 79 | Supply and fixing single Pole and neutral enclosure with a two pin and earth plug and socket modular type with one single pole MCB 20 Amps complete all as specified and directed. |
| 80 | M&L Earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground preferably vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanized iron wire 4 mm dia as earthing lead by means of nut bolts and washers of galvaized iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galavanized iron protected by 15 mm dia (medium grade) GI tubing , funnel, wire mesh, 20 mm bore GI tubing (light grade) watering pipe, including concrete pipe in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50 mm reinforced with 8mm dia TMT bars @15 cm C/C in both ways and 10 mm dia MS handle (01 No. ) of suitable size, charcoal and salt in alternative layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part 1 and testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
