|
| 1 | Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and directed. |
| 2 | Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n.exc.1.5m complete all as specified and directed. |
| 3 | Rolling and consolidating formation surfaces in cutting including watering as necessary, filling in the depressions with approved earth which occur during the process, with 8 to 12 tonne power roller, consolidating to required gradient and camber complete all as specified and as directed. |
| 4 | M&L for Soling (or sub base) 200mm thick (spread thickness), in two layers of 100mm thickness each, with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated with 8 to 10 tonne power roller to required gradient and camber complete all as specified and as directed. |
| 5 | M & L for 150mm thick WMM in two layer of each 75mm (compacted thickness), with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed. |
| 6 | Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.complete all as specified and as directed. |
| 7 | M&L for 100mm thick Plain Cement Concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in Sub base of flooring complete all as specified and directed. |
| 8 | M&L for Cement concrete work in pavement / hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.Note : The rate include the cost of formwork up to 250mm thick concrete. |
| 9 | M&L for finishing concrete roads, pavements by brooming complete all as specified and directed. |
| 10 | Forming 20mm thick expansion joints for full depth filled with perforated bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and directed. |
| 11 | Forming construction(Dummy) joints 65mm deep x 10mm wide filled with perforated bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and directed. |
| 12 | Earthwork excavation in all kind of soil by mechanicl means (Hydraulic excavator) over areas (exceeding 30cm in depth, 1.50m in width as well as 10 square metre on plan) but n.exc 1.5m depth, including getting out and disposal of excavated earth lead upto 50m and lift upto 1.50m complete all as specified and directed. |
| 13 | M&L for moorum / red bajri filling in floors or pavings, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering etc complete all as specified and directed. |
| 14 | M&L for broken stone or boulders in hardcore of gauge n. exc. 63mm, deposited , spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 15 | M&L for precast cement concrete block masonry with hollow blocks, exc. 10 cm in width and setting in CM 1:4, type C1 1:3:6 (20mm graded aggregates) complete all as specified and directed. |
| 16 | M&L for 15mm thick for rendering fair faces of brick work or Concrete surface in CM (1:4) finished even and smooth without using extra cement including mixing with water proofing compound complete all as specified and as directed. |
| 17 | M&L for Preparation plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 18 | M&L for PCC 50 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floors,pavings etc and finishing cement conerete surface even and smooth using extra cement complete all as specified and directed. |
| 19 | Excavation in post holes each n.exc. 0.5 Cum getting out in loose soil including returning, filling in and ramming each or broken rubble mixed with earth around in layers exc. 25 cm and watering and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and directed. |
| 20 | M&L for Plain Cement Concrete as in foundations filling mass concrete PCC 1:3: 6 type C2 (using 40mm graded stone aggregate) complete all as specified and as directed. |
| 21 | M&L for Plain Cement Concrete in foundations fillings and mass concrete PCC 1:2:4 type D2 (using 40mm graded stone aggregate) complete all as specified and as directed. |
| 22 | M&L for Steel work as in tubular trusses, Purlin,Post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 23 | M&L for MS Plates (Plain or chequered) channels, sqaure cut or notched (ordinary and counter sunk) forming holes without any attachment complete all as specified and as directed. |
| 24 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 25 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as ridge in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 26 | M&L for bands, straps,supports or stays for rainwater, ventilating pipes,including bolts, if required;hook(stay),heavy, for large gates: hook and pintle hinges: large hasps and staples: chains hand made sliding bolt , clamps, hold fast: wall ties: hooks for hanging fans: plain angle cleats for securing purlins to wood trusses or rafters two way & three way straps , plate washers and similar small articles confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 27 | M&L for painting to steel surfaces of any description over to 10 cm width or girth not other wise described and painting in two coats of synthetic enamel paint over one coat of Red oxide primer including preparation of new steel surfaces complete all as specified and as directed. |
| 28 | S&F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75 mm dia for connecting valley gutter complete all as specified and as directed. |
| 29 | S&F PVC (SWR) Bends of 75 MM dia complete all as specified and as directed. |
| 30 | S&F PVC (SWR) reducers of 75 MM dia complete all as specified and as directed. Please Enable Macros to View BoQ information |
