|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF) Gorakhpur Name of Work: SPECIAL REPAIR TO 04 x TOILET/BATHROOMS OF BLDG NO P-8, OLD MT LINE AND PROV OF 01 (ONE) x SHED WASHING POINT FOR OR COOK HOUSE AT GRD COMPLEX GORAKHPUR MIL UNDER GE(AF) GORAKHPUR Contract No.: GE(AF)/GKP/E-107 OF 2025-26 File No. 9430/E8 Serial Page No.15 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises . |
| 3 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick joint free tiles set and jointed in neat cement slury and pointed in white or colour cement to match over and including 10mm thick screed bed in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 4 | S&F joint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15 mm thick screed bed in cm 1:6 etc complete. |
| 5 | Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed. |
| 6 | M&L Rendering 5mm thick in CM 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified as directed. |
| 7 | M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed. |
| 8 | M&L preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer with roller complete all as specified as directed. |
| 9 | M&L preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of distemper oil emultion complete all as specified as directed. |
| 10 | M & L for Preparation of old decoreted surfaces of wall including complete removal of existing treatment and applying two coat of cement base paint all as specified as directed. |
| 11 | Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking of shutter from frame) all as specified and remooving from site. |
| 12 | Taking down chowkats or frame exe 1.5sqm and n.exe 4 sqm with shutter (with out taking of shutter from frame) all as specified and remooving from site. |
| 13 | S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as directed. |
| 14 | S&F factorymade solid pannel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with neat moulded plan colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on eithor side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet bedding and jointed together with solvenet cement, supply and fixing in the frame at site as per specification as specified. |
| 15 | S & F powder coated anodised aluminium (sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 1.5 mm thick, side & top track frame size 92 X 29.5 X 1.5 mm thick and shutter aluminium anodised 39 X 20 X 1.5 mm thick incl necessary aluminium fittings like jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass in panels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture complete all as specified and directed. |
| 16 | S&F butt hinges medium weight stainless steel 100mm complete all as directed. |
| 17 | S&F 150mm aluminium anodised of extruded section barrel tower bolts complete all as directed. |
| 18 | S&F 150mm long alumiunium handles cast type anodised complete all as directed. |
| 19 | S & F in Repair Wall mixer 3-in- system with provn for both hand shower and Over head shower complete with 115 mm long bend pipe, connection legs and flange ( with out hand and overhead shower).( Jaquar CON-CHR-281KN ) complete all as directed. |
| 20 | S&F in repair Health faucet with 1 meter long easy flex tube in chrome finish and wall hook with NRV(back flow preventer JAQUAR Cat part No-ALD-CHR-579) complete all as specified as directed. |
| 21 | S&F in repair push button soap dispensers Make-Jaqure (SDR-WHT-DJ0010F) complete all as specified as directed. |
| 22 | S&F in repair PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm complete all as directed. |
| 23 | S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm long complete all as directed. |
| 24 | S&F in repairs for 15 mm bore pillar taps CP fancy type screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all specified and directed. |
| 25 | S&F in repair vitreous china wash basin white Angle back size 400mmx 400mm including brackets, brass chromium plated waste fittings and PVC waste pipe including cutting for and pinning in ends of bracket & waste pipe fixed in repairs. complete all as specified as directed. |
| 26 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed. |
| 27 | S&F in repairs 15 mm bore PVC connection 600 mm long with brass nuts and washers on both ends all as in repairs specified and directed. |
| 28 | S&F in repair chromium plated shower rose fixing with 15mm bore pipe min 40 grms including arm 15 mm size 195mm long with bend min wt 40 gms complete all as specified. |
| 29 | S & F in repair for Brass chromium plate towel rail 600mm long complete all as specified and directed. |
| 30 | S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed. |
| 31 | Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. |
| 32 | S&F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed. |
| 33 | S&F in repair stop valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 34 | S&F in repair Gun-metal, globe 20 mm or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 35 | S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed. |
| 36 | S&F steel water tubing `medium grade’ galvanized 15 mm bore with all medium grade fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive including taking down of water tubing complete all as specified & directed. |
| 37 | S&F steel water tubing `medium grade’ galvanized 20 mm bore with all medium grade fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixed complete to walls and ceiling concealed and joints fixed with adhesive including taking down of water tubing complete all as specified & directed. |
| 38 | S&F in repairs vitreous China squatting pan, \\"Orrissa\\" pattern, size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in cement concrete bedding1 : 2 : 4, Type B-1, using 20 mm graded crushed stone aggregate minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes including making good floor complete all as specified and directed. |
| 39 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder |
| 40 | S&F in repair Toilet paper holder MSCP complete all as spd.(Make- Jaquare) Cat No- AKB - 35751 or equivalent. |
| 41 | S & F 250mm long mild steel sliding door bolts, bolt & clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 42 | S&F 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like 20 mm cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite. |
| 43 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 44 | S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches as in floors, all as specified & directed . |
| 45 | S&F for 110mm bore PVC (SWR) bends provided with access door all as specified & directed . |
| 46 | S&F for 110mm bore PVC (SWR) shoue provided with access door all as specified & directed . |
| 47 | S&F in repair PVC (SWR) gully trap 125/110 mm,setting and jointing with solventcement |
| 48 | M&L in repair 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement. |
| 49 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 50 | S&F 75mm PVC (SWR) bends anyradius |
| 51 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed. |
| 52 | Material and labour for treating the sunken floor with preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with funny bags to remove all loose dirt etc, applying consisting of the following operation:-(a) 10mm thick plaster/screed bed in cement mortar 1:3 complete mixed with liquid water proofing compound as per manufactures instructions complete all as specified & directed (Note - WPC shall be measured and paid separately).(b) Cleaning floor surface by wire brush brooming & removing dust & shall be painted with a coat of bituminous primer conforming to IS : 3384-1986 @ 0.3 Ltr per Sqm uniformily complete all as specified & directed. (c) After primer the entire roof surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to 702-1988 @ 1.2 Kg per sqm over primer.(d) Over hot bitumen laying polymeric water proofing membrance conisting of 90 to 100 micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture's technical instruction & sealed complete all as specified & directed.(e) Again the entire floor surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to IS 702 @ 1.2 Kg per sqm. |
| 53 | S&F 40 mm tube galvanised iron light grade cut to required size as per site requirement to be placed in sunken portion of toilet/bathroom and taking out old pipe. |
| 54 | S&F in repairs CP Grating doom 100 mm dia with waste hole complete all as specified as directed. |
| 55 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. |
| 56 | Demolition of brick tiles flat or edges laid bedded and pointed in any type of mortar complete all as specified and directed. |
| 57 | Dismantling/Demolition /striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris complite all asspecified and directed. |
| 58 | M&L for 40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth .complete as specified and directed. |
| 59 | M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3, using Liquid Water Proofing Compound as per manufacturer's instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately) |
| 60 | M&L for Water proofing treatment on \\"approachable / accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete(i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated.(ii) Laying APP (Atactic polypropylene Polymer Modified preffabricated membrane) waterr proofing membrane of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps.(iii) Applying two coats of bituminious based bitumen primer @ 0.3kg/sqm and spreading corse sand on primer to obatined rought sufrace which facililate make a bond between membrane and screed bed complete all as specified and as directed. |
| 61 | M&L for 300mm x 300mm x 7-9mm thick size roof cool tile to reduce room temperaature, slip resistance, ocean blue in colour laid in cement mortar 1:6 and pointing in CM 1:3 over 15mm thick screed bed complete all as specified and directed. |
| 62 | M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tank type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed. |
| 63 | S & F factory made Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specification all as specified and directed. |
| 64 | M&L for PCC 1:3:6 type C1 as in hold fast blocksand filling in pressed steel frame and fasning of hold fast incl. necessary form work all as specified and directed. |
| 65 | S&F 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kilm seasoned and chemically pressure treated all as specified and directed. |
| 66 | Dismantling wrought iron or mild steel work of any description not otherwise provided forwindows grill etc all as specified and directed. |
| 67 | S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed. |
| 68 | M/L preparing new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat off red oxide primer complete all as directed |
| 69 | Surface dressing n exc 15 cm deep and getting out of any type of soil complete all as specified and directed. |
| 70 | Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any soft/loose soil complete all as specified and directed. |
| 71 | Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any type of soil (for manholes and sewage lines, drain etc.) complete all as specified and directed. |
| 72 | Returning filling in including spreading watering and well raming in layer . Exc 25 cm each in loose/soft soil complete all as specified and directed. |
| 73 | M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed |
| 74 | Removing excavated soil to a distance exc 250 m but n.exc 500 m and deposited where directed at a level n exc 1.5 above the starting point complete all as specified and directed. |
| 75 | M&L for hard core, broken stone/boulders to gauge n exc 63 mm complete all as specified and directed. |
| 76 | M&L for PCC 1:4:8 type D-2 (using 40mm stone aggregate) as in foundation etc complete all as specified and directed. |
| 77 | M&L 25 mm thick PCC type B1- 1:2:4 (using 20 mm graded agg) in sub base complete all as specified and directed. |
| 78 | M&L machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified. |
| 79 | Ditto but as in riser of steps, skirting, dado and pillar but prepolished laid over 15mm tick cement plaster in CM 1:4…ditto as above |
| 80 | M&L cement concrete in foundation filling and mass concrete type C2 1:3:6 (using 40 mm graded aggr) all as specified. |
| 81 | S&F rolled mild steel work as in roof trusses ( beam, tee, angle iron etc) complete all as specified. |
| 82 | S & F Rolled mild steel plates as in guesset plates, base plates etc complete all as spd. |
| 83 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 84 | S&F mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut ,not exceeding 5cm long and diameter of neck 5 to 10mm complete all as specified and directed by Engineer-In-Charge. |
| 85 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 86 | Material and labour for point wiring of one light/ fan/ bell point controlled by one switch with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed. |
| 87 | Ditto as above but for one 3 pin switch socket outlet point 5 Amps on independent board….ditto as above… |
| 88 | All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.….ditto as above… |
| 89 | S&F Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 90 | M&L Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge. |
| 91 | M&L Modular Socket outlet Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer in charge. |
| 92 | M&L for Modular Switch piano, flush type single pole, one way 16 Amp all as specified and directed.. |
| 93 | S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.. |
| 94 | Supply and fixing in repair LED lights fitting 1x 36W, 6500K, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells Cat No LHEXAPP7IN1W036 or equivalent in Bajaj/ Philips. |
| 95 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Havells Cat No LHEXAZP7PN1W010 or equivalent in Bajaj/Philips |
| 96 | Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 97 | Supply and fixing in replacement GI Pipe bend to shape 0.75 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall complete all as specified and directed. |
| 98 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring,etc., and making good, cutting notexc 10 cm girt |
| 99 | Supply and fixing in repair of factory made epoxy powder coated distribution board TPN, 4 Pole, 4 ways Double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asian Or eqvt make of Havells/Legrand |
| 100 | Supply and fixing in repair of factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make :Indo asian Or eqvt make of Havells/Legrand |
| 101 | Supply and fixing in repair MCB single pole 240 volt 'B' curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one. |
| 102 | Supply and fixing in repair MCB single pole & neutral 240 volt 'C' curve 10 KA 25 to 32 Amps complete all as specified and directed . |
| 103 | Supplying and fixing in repair MCCBs 415V, 4 Pole, 125 Ampere, 16 KA breaking capacity. |
| 104 | Supply only modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as specified and directed. |
| 105 | Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc all as directed. |
| 106 | M&L for concealed sub main wiring with 4 Nos single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable (FRLS) and 2 No single core PVC insulated-unsheathed 6.0 sqmm stranded copper conductor cable (FRLS) for earth continuity, drawn in & including suitable PVC conduit pipe with all fittings ISI mark of Ivory/Grey/white colour medium grade fixed in wall or on ceiling complete all as specified and directed. Note: (i) Length of 3 No 6.0 sqmm conductor cable, 1 No 6.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length. |
| 107 | M&L for concealed sub main wiring using two single core PVC insulated, unseathed stranded copper conductor cable of size 4.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit). |
| 108 | M&L for cutting holes into or through brick walls built in in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete for installation of Exhaust fans of dia not exceeding 450mm and make good to match the existing complete all |
| 109 | Supply and fix exhaust fan made of steel body complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No including dismantling of old exhaust fan and depositing to MES AGE E/M store complete all as specified and directed. |
| 110 | Supply and fix in repair water heater storage vertical type, puff insulation type of 25 ltrs capactiy, BEE Star rated-5, with glass line inner shell with necessary fixing arrangement and including writing MES No including dismantling of old water heater and depositing to MES AGE E/M store complete all as specified and directed. |
| 111 | M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways,with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SI Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
