|
| 1 | Providing and fixing of GREEN NET as per the requirement of the standard size and as per direction of Engineer-in-charge. |
| 2 | Normal 2D WALL Painting with good quality paint as per engg.in charge (Including of GST ) also including preparation of surface and BASE ETC. |
| 3 | WRITING WORK with WALL good quality paint as per engg.in charge (Including of GST ) also including preparation of surface and BASE ETC. |
| 4 | 3D WALL Painting with good quality paint as per engg.in charge (Including of GST ) also including preparation of surface and BASE ETC. |
| 5 | Providing and fixing 40mm thick red stone slab over drains including Pointing in cement mortar 1:3 (1 cement : 3 sand) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 7 | 12 mm cement plaster of mix :1:4 (1 cement: 4 sand) |
| 8 | 15 mm cement plaster on rough side of single or half brick wall of mix.1:4 (1 cement: 4 sand) |
| 9 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works. |
| 10 | Brick work will well burnt open bhatta bricks crushing strength not less than 25kg/cm² and water absoption not more than 20% in above plinth level upto floor two level in cm 1:6 including the cost of scaffholding etc. |
| 11 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.Mild steel and Medium Tensile steel bars. |
| 12 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate. |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.75mm diameter |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rainwater pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.110mm diameter |
| 15 | Distempering with 1st quality acrylic distemper (ready mixed) ofapproved manufacturer, of required shade and colour complete, as permanufacturer's specification.Two or more coats on new work |
| 16 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 17 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work Please Enable Macros to View BoQ information |
