|
| 1 | Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sidesand bed stacking the excavatted soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Providing and laying cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth. |
| 3 | Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- |
| 4 | Foundation and plinth. |
| 5 | Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 6 | Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- |
| 7 | suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level. |
| 8 | Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to give fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and |
| 9 | Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like. |
| 10 | Flat surfaces such as soffits of suspended floors, roofs landings and the like: floors etc. up to 200 mm in thickness. |
| 11 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level. |
| 12 | Providing and Fixing precast concrete man hole cover and frame, conforming to IS-12593-Part-I 1888 and IS 12592-Part-II,1991560mm diameter , Heavy duty. |
| 13 | Providing and fixing cast iron / sand cast iron spun spigot ventilating pipe 100 mm dia. |
| 14 | Providing,Laying,Jointing and Testing in trenches GMS tubes screwed and socketed, (Light Class) ISI Marked conformining to IS :1239 (latest with up to date ammendments) of approved make of JSV including tube fitting such as bends, tees, air valves,unions and collars etc. as per direction and to the entire satisfaction of the Engineer-In -Charge. (Earth work in trenches to be measured and paid for separately ). |
| 15 | 40 mm dia |
| 16 | 50mm dia Please Enable Macros to View BoQ information |
