|
| 1 | Excavation in earth work and disposal of excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed in Pick-Jumper work. |
| 2 | Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 40mm nominal size) excluding cost of centring & shuttering in foundation and plinth. |
| 3 | Providing and laying cement concrete work 1:1.5.3 (Icement 1.5sand: 3 graded stone aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in: |
| 4 | in walls (any thickness but not less than 0.10 metre thickness Jincluding attached pillnsters, plinth and string course, ote. from ton of foundation un to floor two level. |
| 5 | Cement concrete flooring 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement. (40mm thick) |
| 6 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling |
| 7 | Flat surfaces such as soffits of suspended floors, roofs, landings & the like. (Floors upto 200mm th.) |
| 8 | Vertieval surface such as wall (any thickness) partition and the like including attached pillasters, buttresses plinth and string and the like with in all leads and lifts as per the direction of the Engineer-in-charge outer side inner side. |
| 9 | Providing and laying cement concrete work 1:2:4 (1) cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in. |
| 10 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor two level. |
| 11 | Foundation and Pilinth |
| 12 | Providing mild steel/tor steel reinforcement for RCC work 10 including bending, binding and placing in position complete upto floor two level. |
| 13 | laying in trenches, galvanized mild steel tubes (light grade), tube fittings (earth work in trenches to be measured & paid for separately). |
| 14 | 25mm nominal bore |
| 15 | Providing and fixing Gun metal full way wheel valve. |
| 16 | 25mm nominal bore |
| 17 | 15mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.Cement Mortar 1:3 (1 cement: 3 sand |
| 18 | Providing and laying in trenches ,high density polyethylene pipes .(conforming to IS :4984-2016) complete with fitting ,(earth work in trenches to be measured & Paidfor separaty ) 20 mm dia nominal Dia ) |
| 19 | HDPE Pipe 25 mm Dia PE-80 PN-16 |
| 20 | Providing and Fixing 65 mm dia stand post. |
| 21 | Providing and Fixing brass bib tap 15 mm dia (superior or heavy type) Please Enable Macros to View BoQ information |
