Tender For Restoration Of Rain Damges To Water Supply Scheme Thalla In Gp Aura Tehsil Bharmour Distt Chamba (Sh-C/O 10000 Lit Cap At Reinforced Cement Concrete Storage Tank Near Naag Mandir)
Tender Value
3.76 Lakhs
Estimated cost
Bid Submission
04 Apr 2026
0 days left
EMD
7521
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharmour → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damges To Water Supply Scheme Thalla In Gp Aura Tehsil Bharmour Distt Chamba (Sh-C/O 10000 Lit Cap At Reinforced Cement Concrete Storage Tank Near Naag Mandir)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work and disposal of excavated earth upto a lead of 20 meters in and lift upto 1.50 meter disposed earth to be levelled nearly dressed in pic jumper work with in all leads and lifts as per the direction of Engineer-in-charge |
| 2 | Providing and laying cement concrete 1:3:6(1: cement :3 sand :6 graded crushed stone agg. of 40mm. Nominal size) and curing complete excluding the cost of form work in foundation and plinth with in all leads and lifts as per direction of the Engineer-in-charge. |
| 3 | Providing and laying cement concrete work 1:1.5:3 (1cement 1.5sand: 3 graded stone aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in: |
| 4 | Foundation , footings, bases of columns etc. and mass concrete.in all leads and lifts and as per the direction of the Engineer-in –Charge. |
| 5 | Wall ( any thickness but not less than 0.10 mtr. Thickness) including attached pilasters buttersses, plinth and string courses etc, from top of foundation upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge. |
| 6 | Providing form work with steel plates 3.15mm. thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centering shuttering strutting and propping etc, with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu reinforced concrete and plain concrete work in :- |
| 7 | Flat surfaces such as soffits of suspended floor, roofs landing and the like floors etc.upto 200mm in thickness.upto all thickness including all leads and lifts as per direction of the Engineer-in-charge. |
| 8 | Verticval surface such as wall (any thickness) partition and the like including attached pillasters, buttresses plinth and string and the like with in all leads and lifts as per the direction of the Engineer-in-charge. |
| 9 | Providing and laying cement concrete 1:2:4(1: cement :2 sand :4 graded crushed stone agg. of 20mm. Nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :- |
| 10 | Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge. |
| 11 | Providing mild steel/tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge. |
| 12 | White washing with lime on undecorated wall surfaces( two coats) to give an even shade i/c throughly brooming the surface to remove all dust dirt & other foreign matter as per direction of Engineer-in-charge |
| 13 | Pro from work with steel plates 3.15 mm manhole cover 600x600 mm with locking arrangment (Drawing attached. |
| 14 | Providing laying jointing in tranches glavainzed mild steel tubes including the cost of Tee Bend Union socket & elbow etc. complete in all respect (earth work in tranches to be measured and paid for separtely including complete fitting and paid for separtely including complete fitting and as per the direction of the Engineer-in-charge |
| 15 | 50mm nominal bore |
| 16 | Providing and fixing sand cast/iron spun spigot and socket soil waste and ventilating pipe (100 mm nominal size)Lead caulked) points to be measured and paid for separtely within all leads and lifts as per direction of Engineer-in-charge |
| 17 | Providing and fixing cast iron cowl 100mm nominal size with in all leads and lifts as per the direction of the Engineer-in-charge. |
| 18 | providing and fixing cast iron sluice vavle (IS 14846;2000 |
| 19 | 50mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Mar 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedApr 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender