|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil |
| 2 | Random rubble dry stone Kharanja under floor. |
| 3 | Supplying and Filling in plinth with river sand under floorsincluding watering ramming consolidating and dressingcomplete including cost of sand |
| 4 | Sand filling |
| 5 | Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. |
| 6 | Filling available excavated earth (excluding rock) in trenches,plinth side of foundation etc. in layers not exceeding 20 cm. indepth, consolidating each deposited layer by ramming andwatering including lead up to 50 meter and with all lift. |
| 7 | Clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of girth upto 30 cm measuredat a height of 1 m above ground level and removal of rubbishupto a distance of 50 m outside the periphery of the areacleared. |
| 8 | Granular Sub-base with Well Graded Material (Table 400-1) |
| 9 | Plant Mix Method |
| 10 | Providing laying spreading and compacting specified graded sand,gravel (crushedstone asperTable400-1,400-2oranyothercoursematerialasperdesignmix,asperCBRinsubbasecourseincludingpremixingthematerialatOMCinwetmixplant,carriageofmixedmaterialspreadinginuniformlayerswithmotorgraderF.Eloaderonapreparedbaseandcompactingwithvibratoryrollertoachievedesireddensity(asperI.S.2720)includingallmaterial,labor,machinery,lightingguarding,barricadingandmaintenanceofdiversioncomplete.[MoRTH specification : Clause 401]. By mechanical means. |
| 11 | For Grading-I Material |
| 12 | Providing and Laying in position cement concrete including curing,compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 13 | M10 grade Nominal mix 1:3:6 (1Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 14 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 15 | Columns, pillars, posts and struts etc. Column |
| 16 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 17 | Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. All works upto floor V floor M20 grade Design Mix by using cement as per codal provision. . |
| 18 | Add extra for providing richer mixes respectively at all floor levels Providing M-30 grade concrete by using cement as per codal provision instead of M-20 grade design mix. |
| 19 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406. |
| 20 | By Mechanical Means with all lead |
| 21 | Construction of un-reinforced , plain cement concrete pavement M30 (Grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per Clause 602.2.2 , coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design including pumping of R.M.C. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using Fixed Form Paver and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Dowel Bars will be paid seprately). |
| 22 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. |
| 23 | Thermo-mechanically Treated bars (Conforming of relevent IS code) for Puliya & toilet block |
| 24 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks |
| 25 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 26 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : |
| 27 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 28 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 |
| 29 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 30 | P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. |
| 31 | size 600 mm X 600 mm |
| 32 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). For toilet block |
| 33 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. |
| 34 | Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) |
| 35 | Up to 1500 Cm2 Tiles |
| 36 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finish : |
| 37 | 20mm thick. |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 39 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete |
| 40 | New Plastered Surface (three or more coats), |
| 41 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: |
| 42 | Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. |
| 43 | Supply & fixing of M-20 grade precast cement concrete Kerb or Dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earth work, pointing & jointing with cement mortar 1:4 of size |
| 44 | (20 x 25) x 30 cm |
| 45 | Supplying, erecting and fixing in position specified precast RCCbench made of RCC grade M-30 consisting of 2 Nos. “L” shapedbase support of thickness 100 mm back height 1000mm, front height450 mm, base width 420mm and 5 Nos. RCC planks of size of1500x100 x 50 mm and 1 Nos RCC planks of 150x200x50mmincluding joining all parts with galvanised nuts and bolts of suitablesize. All bolts to be sealed after assembly with nice finish andappearance and level complete in all respect as per direction ofengineer in charge. Every bench should have a manufacture‘s logoof appropriate size Engraved at suitable place. |
| 46 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 47 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), |
| 48 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: |
| 49 | Size 580x440mm. [ C- In Bathrooms |
| 50 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. |
| 51 | Size 600 x 450mm x 4 mm thick |
| 52 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor [ In Hall ] |
| 53 | P & F Bib Cock (IS : 8931 Mark), Superior quality ofapproved make: |
| 54 | C.P. Brass bib cock,15mm nominal bore. |
| 55 | P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook ofapproved make and heavy as per direction of Enginner-in-Charge |
| 56 | P & F water closet Seat Covers with brass hinges complete : |
| 57 | Solid PVC (IS 2548 marked) grade-I Black for EWC. |
| 58 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : |
| 59 | Size 610 mm x 510 mm |
| 60 | P & F 15 mm. Dia Connection Pipe of approved quality/make |
| 61 | PVC pipe with C.P. Brass nuts upto length, 450mm |
| 62 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: |
| 63 | PVC with PVC bend and superior internal fittings as per IS : 7231 . |
| 64 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
| 65 | C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 66 | P & F Towel Rail or Ring of approved quality/make: |
| 67 | C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). |
| 68 | P & F C.P. Brass flush Valve with C.P. flush bend of approved make. |
| 69 | Lever type with Elbow 32 mm dia |
| 70 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: |
| 71 | Brass 400 gm. 15mm nominal bore. |
| 72 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge |
| 73 | Long body Bib Cock 15 mm nominal size |
| 74 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : |
| 75 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : |
| 76 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: |
| 77 | 500 (-do-) |
| 78 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 79 | Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) |
| 81 | 20mm nominal size |
| 82 | 25 mm nominal size |
| 83 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. |
| 84 | PVC 110MM pipe |
| 85 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 86 | Coupler (socket)110MM Dia |
| 87 | Plain Tee 110MM Dia |
| 88 | Bend 45- 110MM Dia |
| 89 | Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames) |
| 90 | Using M.S. angles 40 x 40 x 6mm for diagonal braces. |
| 91 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). [In Bathroom] |
| 92 | Laying of lawns including ploughing leveling breaking ofclods manuring and removal of stones etc. (cost of manure orextra good earth to be paid separately )maintenance of lawnfoe 30 days or more till the grass forms a thick lawns free fromweeds and fit for moving in the duration of planting if lawndie some where the contractor will replant it at his own cost |
| 93 | in rows 5 cm apart in either direction |
| 94 | nwc dk la/kkj.k dk;Z &yxh gqbZ nwc dk la/kkj.k dk;Z esa [kjirokj fudkyuk] fu;fer flapkbZ djuk] [kkn Mkyuk ,oa e’khu ds }kjk fu;fer dVkbZ djuk rkfd nwc vPNh rjg ls fodflr gks ldsA |
| 95 | Hedges of various varieties |
| 96 | Golden durantain P.B(5”X6”) - 6”-1‟ |
| 97 | Maintenance of Hedge, Climbers, Shrubs at parks including watering, trimming, preparation of thawala, manure and complete work. |
| 98 | Sweeping / cleaning of gardens roads lawns paths and disposal of all rubbish |
| 99 | Supply & Plantation of selected specimen plants including mortality replacement, loading - unloading transportation and maintenance for 30 days after planting the plants (as per scope of work for Horticulture) |
| 100 | 1. Preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. |
| 101 | 2. Supply of dry manure (Farm yard manure organic) |
| 102 | 3. Supply of Insecticides. |
| 103 | 4. Digging of pits size 60x60x60 cms. Including removal of stones, Manuring application of insecticides & watering at least 15 liter per plant after planting. |
| 104 | 5. Watering to plants. |
| 105 | 6. Maintenance of plants by the contractor including pits, preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintenance contractor has to replace same height plant at his own cost. |
| 106 | Cycus revolata 3'-4' Dia |
| 107 | Cycus circinalis 4'-5' Dia |
| 108 | Furcraea gigantia 3'-4' Dia |
| 109 | Juniprus chinensis 5'-6' height |
| 110 | Phoenix roebilinii 2'-3' ht dia 3'-4' |
| 111 | Phoenix roebilinii 5'-6' height |
| 112 | Phoenix dactylifera 12'-15' height |
| 113 | Roystonea venezuelana 10'-12' height |
| 114 | Latania loddigesii 5'-6' height |
| 115 | Bismarckia nobilis 5'-6' height |
| 116 | Washintonia filifera 5'-6' height |
| 117 | Wodyetia bifurcata 10'-15' height (Foxtail Palm) |
| 118 | Arica Palm 10'-15' height |
| 119 | Rhapis Palm 4'-5' height |
| 120 | Green vulgaris Palm 10'-15' height |
| 121 | Ficus prestige 3'-4' height |
| 122 | Ficus king bush 3'-4' height |
| 123 | Ficus nuda 4'-5' height |
| 124 | Ficus Panda topiary dia 3'-4' height |
| 125 | Ficus Black Prince 3'-4' topiary height |
| 126 | Ficus Starlight 4'-5' height |
| 127 | Ficus benjamina 12'-15' height |
| 128 | Plumeria Alba 10'-12' height |
| 129 | Plumeria Singapore 4'-5' height |
| 130 | Ficus Nitida Topiary 7'-8' height |
| 131 | Trimnelia 12'-15' height |
| 132 | Bougainvellea Topiary 3'-4' height |
| 133 | Schefflera actinophylla 10'-12' height (Umbrella tree) |
| 134 | Mangifera indica 8'-10' height (Mango tree) |
| 135 | Bayan Tree 12'-15' height (Bargad) |
| 136 | Polyalthia longifolia 10'-12' height (Ashok) |
| 137 | Calophyllum inophyllum 10'-12' height(Sultan Champa) |
| 138 | Liriodendron 10'-12' height (Tulip Tree) |
| 139 | Magnolia champaca 5'-6' height (Golden Champa) |
| 140 | Melaleuca bracteata 5'-6' height Topiary (Bottle Brush) |
| 141 | Juniperus chinensis 5'-6' height |
| 142 | Thuja compacta 5'-6' height (Mor Pankhi) |
| 143 | Double Swing : Double Swing is suitable for 4 to 14 years Children and frame is made of NB pipes which should be following specifications :Area : 3.0 mtr x 2.50mtr.Safe play area : 4.0 mtr x 3.50 mtr.Height : 2.40 mtr. (on ground level)Leg support : 40mm NB pipes Top bar : 50mm NB pipe Seat : 9mm thick reinforced rubber (Non skid chequired top, bearing : Housing special casting heavy duty bail bearing, suspension : 7mm dia Electro Galvanized chain |
| 144 | Single See Saw : The Single See Saw suitable for 4 to 8 years children and made of MS pipes which should be following specification : Area Required : 1.50 mtr.x 3.0 mtr.Height : 0.90 mtr. Main Pipe : 50 NB pipePlank : 40 NB pipeHandle : 20 NB pipe Seats : MsS sheet (5mm thick) FRP |
| 145 | Wave Slide : The sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. (Binani or equivalent make) with a smooth surface consist of 3 sliding mould of 2.00 ft. (approx). The platform made out of 10 gauge MS sheet and shall be supported on 33mm OD 14 gauge. The ladder shall be 60cm wide (approx) and will be made of 25mm NP pipe with 15mm dual steps. The slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. (approx) |
| 146 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 147 | 5 step fan regulator 2 Module 360 dgree rotating |
| 148 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 149 | Short point (up to 3 mtr.) |
| 150 | Medium point (up to 6 mtr.) |
| 151 | Long point (up to 10 mtr.) |
| 152 | Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture.system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate /Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this |
| 153 | 1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing |
| 154 | Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , referAnnexure \\"A\\" attached with this BSR . |
| 155 | Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure \\"A\\" attacheded with thisBSR. |
| 156 | 15 Watt |
| 157 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with thisBSR . |
| 158 | 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) |
| 159 | SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 160 | 1.0 HP, 1-Ø, (10-120)Mtr, (30-12) LPM |
| 161 | Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 162 | 300 mm sweep(900/1400 RPM) Please Enable Macros to View BoQ information |
