|
| 1 | Supply of following Decentralized materials Provide by Contractor at the works site as per RESSPO norms. |
| 2 | X-arms holding clamps with bolts & nuts for PCC Pole |
| 3 | M.S clamp for T-off channel with bolts & nuts for ST/PCC Pole |
| 4 | Stone pad, 300x300x75 mm |
| 5 | F-bracket with bolts & nuts for PCC Pole |
| 6 | E-bracket with bolts & nuts |
| 7 | PG clamps |
| 8 | Number Plate for ST Pole |
| 9 | All. Paint |
| 10 | Red Oxide Paint |
| 11 | All. Binding wire 6 mm |
| 12 | Danger Board with clamps & bolts for ST/PCC Pole |
| 13 | Barbed wire GI |
| 14 | HDPE Pipe 140 mm |
| 15 | Clamps with nuts & bolts for Top/Dropper Channel for ST/PCC Pole |
| 16 | Cross bracing clamp with bolts & nuts for ST/PCC Pole |
| 17 | Stay clamp with nut & bolts for ST/PCC Pole |
| 18 | Stay Insulator |
| 19 | Cartage of following materials from ESC, Mirzapur to work site including loading & unloading charge. |
| 20 | ST Poles 11 mtr long |
| 21 | PCC Poles 8.5 mtr long |
| 22 | All Line materials with ACSR Weasel Conductor |
| 23 | 11 KV XLPE Cable size 3x185 mm2 |
| 24 | Erection |
| 25 | Erection of single support ST/PCC Pole for construction of 11 KV lineincluding digging of pit, fitting of all accessories, back filling of earth & others required work as per RESSPO norms. |
| 26 | Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by theconstractor on his own his own cost). |
| 27 | Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on hisown his own cost). |
| 28 | Earthing of Poles as per RESSPO norms. |
| 29 | Stringing & sagging of 3 phase 11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering as perRESSPO norms. |
| 30 | Erection of Sectional Double Pole Structure of ST/PCC pole including digging of pit, fitting of all accessories, earthing of Pole, back filling of earth, grouting of each pole & stay sets as per RESSPO norms (cement sand & brick ballast wil be supplied by the constractor on his own his own cost). |
| 31 | Drill/Cut of stone in hilly area. |
| 32 | Laying of U/G / O/H 11 KV XLPE cable size 3x185 mm2 as per RESSPOnorms. |
| 33 | Laying of U/G 140 mm HDPE Pipe as per RESSPO norms. |
| 34 | Filling of O/D 11 KV cable jointing kit size 3x185 mm2 as per RESSPOnorms. |
| 35 | Drilling under the Railway Track by HDD Machine as per RESSPO norms. |
| 36 | Dismantal charge of old 11 KV line. |
| 37 | Cartage of received back materials from work site to ESC, Mirzapurincluding loading & unloading charge. Installation of 11 KV Pilfer proof metering cubicle inside meter room, by fixing rag bolts after checking alignment with trench & conneting incomming & outgoing cable in the CT chamber Please Enable Macros to View BoQ information |
