Tender For Under The Electricity Secondary Works Division-Gorakhpur For The Construction Work Of New 33/11 Kv S/S Katarari (2X5 Mva), Construction Of New 33 Kv Line Katarari For New Proposed Substation From 132/33 Kv Substation Bhatwaliya And The Con, Deoria-Uttar Pradesh

TDR : 54883483

Tender Notice
BOQ

7 Days Left

Deoria , Uttar Pradesh

Tender Brief : Tender For Under The Electricity Secondary Works Division-Gorakhpur For The Construction Work Of New 33/11 Kv S/S Katarari (2X5 Mva), Construction Of New 33 Kv Line Katarari For New Proposed Substation From 132/33 Kv Substation Bhatwaliya And The Con

Document Fees
₹ 3540 /-

EMD
₹ 100000.0 /-

Tender Value
Refer document

Submission Date
07-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Part A (Materials Provided by contractor) Katarari S/S
2	33 KV Ploymer Pin insulators
3	PG Clamp Dog to Dog Conductor
4	PG Clamp Panther to Dog Conductor
5	Cable Jointing Kit 3×300 mm outdoor
6	Cable Jointing Kit 3×300 mm indoor
7	Cable Jointing Kit 3×185 mm outdoor
8	Cable Jointing Kit 3×185 mm indoor
9	MS Dropper Channel
10	11 KV Top Channel
11	G I Pipe 6'' Dia
12	11 KV Disc Insulator B&S Polymeric Type
13	11 KV Disc Fitting
14	PG Clamp weasel to weasel
15	Number Plate with clamp and Nut & Bolt
16	Danger Board with clamp and Nut & Bolt
17	Barbered Wire
18	Nut Bolt and washer all sizes
19	Stay set complete
20	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
21	Holding Clamp for GI Pipe
22	Holding Clamp for cable
23	Holding Clamp for Top, Droper
24	Lug for ACSR Dog Conductor
25	L.T.P.V.C. Cable 3½×70 mm2
26	Terminal Gantry
27	Bus Bar complete with structure and required all materials(acsr panther conductor,insulator and pg clamps etc)
28	Cable Stand with MS Channel
29	L Type Structure for Neutral Stand
30	24 Volt Battery & Battery Charger/Inverter with cabinet
31	Armoured Cu. Control Cable 2×2.5 mm2
32	Armoured Cu. Control Cable 4×2.5 mm2
33	11 KV T.P. M.O. Switch with fixing clamps
34	11 KV Fuse set with fixing clamps.
35	T&P of Substation switchgears(Hand Gloves-05 Set,Safety Helmets-5 Set, Safety Belts-4 Set, Tool Kit Box-1No,Pliers-05 Nos, Meggar-1 No, Multimeter-1 No,earth chain,Ladder,Discharge Rod up to 33 kv-3 No.)
36	Rubber Mat
37	Fire Fighting equipments including 02 no 10 kg,02 Nos. 4.5 Kg. CO2 Fire Extinguisher potable type and 02 Nos. machenical Foam type Fire Extinguisher potable type
38	Fire Bucket with sand and stand
39	Substation Furniture (4–fiber Chairs,2-wooden chair,1- revolving chair, 2–Table with drawer, 2–Bench, 1–Chauki, 2–Stool)
40	Sundry items
41	Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Deoria to work site
42	ACSR Dog Conductor
43	11 KV XLPE Cable3×300 mm2
44	11 KV XLPE Cable3×185 mm2
45	ST Pole 11 M long
46	PCC Pole 8.5 M Long
47	33 KV line Isolator
48	Structure for line Isolator
49	33 KV Bus Isolator
50	Structure for Bus Isolator
51	33 KV post insulators
52	Structure for Post Insulator
53	33 KV C.T
54	C.T Structure
55	33 KV PT(Outdoor)
56	PT Structure
57	33 KV Fuse Set
58	Fuse Set Structure
59	33 KV Lightning Arrestors
60	LA Structure
61	33 KV VCB 800A, 750 MVA with Structure
62	33 KV Control Panel for Single T/F
63	33KV Control Pannel for single feeder
64	5 MVA Transformer 33/11 KV
65	90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr.
66	11 KV VCB (Incoming) 600/300/5A 350 MVA
67	11 KV VCB (Out going) 200/100/5A 350 MVA
68	11 KV Bus Coupler
69	63 KVA 11/0.4 KV Transformer
70	Erection, grouting,painting of following fabricated structures as per RESSPO Drawing.
71	33 KV Bus bar Gantry
72	33 KV Terminal Gantry
73	33 KV Isolator structure
74	33 KV L.A. structure
75	33 KV Post insulator structure
76	33 KV fuse set structure
77	33KV C.T. structure
78	33KV P.T. structure
79	33 KV VCB Structure
80	Insttalation, mounting and fitting of equipment on erected structures as per RESSPO Drawing.
81	33 KV Line isolator complete
82	33 KV Bus isolator complete
83	33 KV L.A.
84	33 KV Post insulator complete
85	33 KV fuse set
86	33KV C.T.
87	33KV P.T.
88	33 KV VCB
89	Construction of power transformer plinth for 05 MVA transformer of size 3.5 x 3.5 x 0.5 mtr or as per site requirement. including cost of all material as per requirement. (As per UPPCL Drawing)
90	Transformer body earthing complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
91	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
92	Indoor Equipment earthing (11 kv pannels) including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) both delta earthing will be connected with 32mm round bar (As per UPPCL Drawing)
93	Separate earthing of Indoor Equipment (33 kv control pannel) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
94	Special earthing of LA including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
95	Providing and Making of Outdor Earthing (Eartmat) as per UPPCL Norms.
96	Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement. (As per UPPCL Drawing)
97	Rising of cable on DP with GI Pipe 6\\" dia 3mtr long for cable safety.
98	Providing and erection of Special pipe earthing for cable protection.
99	Stringing of Terminal gantry and Making all Jumpers with provided all required material.complete work.
100	Stringing of 33 KV Bus Bar and Making all Jumpers in Switchyard with provided all required material .complete work
101	Providing & grouting of Neutral stand with all required materials.
102	Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
103	Writing name on S/S Building 11 KV Switchgear panels & all equipments insatalled in control room & switchyard.
104	Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor.
105	Installation and connection of 63 KVA T/F with all accessories
106	Fitting & Fixing of TPMO and Fuse set on erected 11 KV D/P.
107	Making of control cable trench with cover and hanger by providing all required materials. as per site requirement.
108	Laying from switchyard to control room for 33 KV panel, CT, VCB, 5 MVA t/F by digging trench and making connection complete. (As per site requirement laying of cable though cable trench if available with covering brick and sand.
109	2 x 2.5 mm2
110	4 x 2.5 mm2
111	Providing and writing of Sub-Station Name & Arrow shine Board Complete.
112	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
113	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar.
114	Construction of SSO's approached road 1.5 Mtr. wide in Switchyard by laying dry sand and interlocking bricks The work include proper plastering top & side of road and leveling & dressing of earth beneath the brick work on edge.
115	Laying of LT cable 3.5x70 sqmm
116	Outdoor switch yard & approch road colony lighting with Provide 06 no. street light pole,150 watt LED light and all required materials
117	Installation of 33 KV control panel for “VCB” with complete earthing and connection of battery and battery charger/inverter in control room and making all protection equipment connection.
118	installation & Concreting of Stay set complete
119	Filling of sand in cable trench in the Switch Gear Room.
120	Installation of 24 V Battery & Battery Charge/ Inverter with cabinet
121	Erection, grouting, muffing and painting of 2 Nos. ST Poles 11m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
122	Erection, grouting of 2 Nos. PCC Poles 8.5 m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
123	Construction of Fire Wall between Transformers with all required material.
124	Providing of Misc. Items i.e. all type register ,Single Line Diagram ,Shut Down/Breakdown Name Board, Writing name on Substation Building,name of feedar & switchgear (As per UPPCL Drawing)
125	Testing & commissioning charges of Substation.
126	Part A (Materials Provided by contractor) 33 KV line Katarari
127	33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through
128	33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor
129	33KV “V” Type Cross Arm
130	Clamp for 33 KV \\"V\\" type Cross arm & side arm with bolts and nuts
131	Providing 6” dia.MS G.I. pipe 3m long
132	F-bracket for 33 KV
133	Danger Plate with clamp and Nut & Bolt
134	G I Barbed Wire
135	Nut Bolt and washer all sizes
136	‘E’ Bracket for 33 KV
137	Top Channel 125x65 mm, 3200 mm long
138	Ms channel/Dropper
139	Holding clamp for top & dropper
140	PG Clamp Dog to Dog
141	Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp
142	Holding Clamp for GI Pipe & cable
143	Lug for ACSR Dog Conductor
144	Stay Clamp
145	Stay Rod 20x1800mm
146	Stay Wire 7/8 SWG
147	MS Guarding Angle With Clamp
148	GI Wire 6 SWG
149	GI Wire 8 SWG
150	Earthing Rod 20x2500
151	33KV Polymer pin insulator
152	Disc Fitting 33KV
153	Disc Insulator 33KV
154	Al. Paint
155	Red Oxide Paint
156	PART – B- WORKShifting,loading and carriage of following materials on private truck at store centre Deoria & Un-loading of the same with proper stacking at work site .
157	P.C.C. Pole 9M long
158	S.T. Pole – 11 Mtr. Long
159	33 KV ‘XLPE’ Cable 3x300mm²
160	ACSR ‘Dog’ Conductor
161	Digging & laying of 33 KV Cable with sand & brick and back filling/HDD Method by drilling machine as per site requirement.
162	Laying of 33KV ‘XLPE’ cable in air and Loop
163	Cable jointing charges of 33 KV XLPE Cable Outdoor & St.TH
164	GI Pipe Earthing Complete for Cable jointing Kit with materials
165	Erection of Double pole structure on 9 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Droper Chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
166	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for single circuit ( 'V' type cross arm 100 x 50 x 6 mm/Side Arm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.
167	Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
168	Erection of four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
169	Erection of Double pole structure on 9 mtr PCC Pole for Cable Rising including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Droper Chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
170	Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
171	Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
172	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.
173	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
174	Part A (Materials Provided by contractor) 04 No. 11 KV line
175	F-bracket for 11 KV
176	Top Channel 100x50x6 mm, 2400 mm long
177	Holding Clamp for Top Channel & Ms channel/Dropper
178	Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
179	Number Plate with clamp and Nut & Bolt
180	Danger Plate with clamp and Nut & Bolt
181	G I Barbed Wire
182	Nut Bolt and washer all sizes
183	PG Clamp
184	Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp
185	11 KV E Bracket
186	11 KV T-off Channel
187	T-off Channel holding clamp with Bolts and Nuts
188	MS Guarding Angle With 4 no. Clamp
189	GI Wire 6 SWG
190	Gi Wire 8 SWG
191	Stay Rod
192	Stay wire 7/8swg
193	Stay Clamp
194	Al. Paint
195	Red Oxide Paint
196	11 KV \\"V\\" tyoe cross arm 65x65x6 mm, M S Angle
197	Polymeric 11KV Pin Insulator
198	Disc Fitting for T&C 45 KN
199	Disc Insulator T&C 45 KN
200	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
201	11KV Cable 3x185sq.mm J/kit
202	Ms Channel/Dropper
203	GI Pipe 6” Dia
204	Holding clamp for GI Pipe and Cable
205	PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Deoria to work site
206	8.5 Mtr PCC Pole
207	11 Mtr STP SP55 Pole
208	ACSR Weasel Conductor
209	11 KV 3x185 XLPE Cable
210	Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
211	Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
212	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
213	Erection of Double pole structure on 11Mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel with clamps, danger board with clamp, barbed wire earthing, etc. complete).
214	Erection of End double pole structure for cable riser on 8.5 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
215	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
216	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
217	Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
218	Digging & laying of 11 KV Cable (Double ckt) in trench with sand & brick and back filling
219	Laying of 11 KV Cable in Air & Looping work Complete
220	Making of J/kit
221	Special pipe earthing
222	Making of Sectional T-off Pole with all fitting complete work.
223	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Power Generation and Transmission Tenders

Sub Station Work Tenders

Substation Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Under The Electricity Secondary Works Division-Gorakhpur For The Construction Work Of New 33/11 Kv S/S Katarari (2X5 Mva), Construction Of New 33 Kv Line Katarari For New Proposed Substation From 132/33 Kv Substation Bhatwaliya And The Con, Deoria-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Part A (Materials Provided by contractor) Katarari S/S
2	33 KV Ploymer Pin insulators
3	PG Clamp Dog to Dog Conductor
4	PG Clamp Panther to Dog Conductor
5	Cable Jointing Kit 3×300 mm outdoor
6	Cable Jointing Kit 3×300 mm indoor
7	Cable Jointing Kit 3×185 mm outdoor
8	Cable Jointing Kit 3×185 mm indoor
9	MS Dropper Channel
10	11 KV Top Channel
11	G I Pipe 6'' Dia
12	11 KV Disc Insulator B&S Polymeric Type
13	11 KV Disc Fitting
14	PG Clamp weasel to weasel
15	Number Plate with clamp and Nut & Bolt
16	Danger Board with clamp and Nut & Bolt
17	Barbered Wire
18	Nut Bolt and washer all sizes
19	Stay set complete
20	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
21	Holding Clamp for GI Pipe
22	Holding Clamp for cable
23	Holding Clamp for Top, Droper
24	Lug for ACSR Dog Conductor
25	L.T.P.V.C. Cable 3½×70 mm2
26	Terminal Gantry
27	Bus Bar complete with structure and required all materials(acsr panther conductor,insulator and pg clamps etc)
28	Cable Stand with MS Channel
29	L Type Structure for Neutral Stand
30	24 Volt Battery & Battery Charger/Inverter with cabinet
31	Armoured Cu. Control Cable 2×2.5 mm2
32	Armoured Cu. Control Cable 4×2.5 mm2
33	11 KV T.P. M.O. Switch with fixing clamps
34	11 KV Fuse set with fixing clamps.
35	T&P of Substation switchgears(Hand Gloves-05 Set,Safety Helmets-5 Set, Safety Belts-4 Set, Tool Kit Box-1No,Pliers-05 Nos, Meggar-1 No, Multimeter-1 No,earth chain,Ladder,Discharge Rod up to 33 kv-3 No.)
36	Rubber Mat
37	Fire Fighting equipments including 02 no 10 kg,02 Nos. 4.5 Kg. CO2 Fire Extinguisher potable type and 02 Nos. machenical Foam type Fire Extinguisher potable type
38	Fire Bucket with sand and stand
39	Substation Furniture (4–fiber Chairs,2-wooden chair,1- revolving chair, 2–Table with drawer, 2–Bench, 1–Chauki, 2–Stool)
40	Sundry items
41	Part -B – WORKShifting, Loading Carriage & Unloading of following materials from store centre Deoria to work site
42	ACSR Dog Conductor
43	11 KV XLPE Cable3×300 mm2
44	11 KV XLPE Cable3×185 mm2
45	ST Pole 11 M long
46	PCC Pole 8.5 M Long
47	33 KV line Isolator
48	Structure for line Isolator
49	33 KV Bus Isolator
50	Structure for Bus Isolator
51	33 KV post insulators
52	Structure for Post Insulator
53	33 KV C.T
54	C.T Structure
55	33 KV PT(Outdoor)
56	PT Structure
57	33 KV Fuse Set
58	Fuse Set Structure
59	33 KV Lightning Arrestors
60	LA Structure
61	33 KV VCB 800A, 750 MVA with Structure
62	33 KV Control Panel for Single T/F
63	33KV Control Pannel for single feeder
64	5 MVA Transformer 33/11 KV
65	90 Lbs. Rail pieces for T/F Wt. 44.6 Kg/Mtr.
66	11 KV VCB (Incoming) 600/300/5A 350 MVA
67	11 KV VCB (Out going) 200/100/5A 350 MVA
68	11 KV Bus Coupler
69	63 KVA 11/0.4 KV Transformer
70	Erection, grouting,painting of following fabricated structures as per RESSPO Drawing.
71	33 KV Bus bar Gantry
72	33 KV Terminal Gantry
73	33 KV Isolator structure
74	33 KV L.A. structure
75	33 KV Post insulator structure
76	33 KV fuse set structure
77	33KV C.T. structure
78	33KV P.T. structure
79	33 KV VCB Structure
80	Insttalation, mounting and fitting of equipment on erected structures as per RESSPO Drawing.
81	33 KV Line isolator complete
82	33 KV Bus isolator complete
83	33 KV L.A.
84	33 KV Post insulator complete
85	33 KV fuse set
86	33KV C.T.
87	33KV P.T.
88	33 KV VCB
89	Construction of power transformer plinth for 05 MVA transformer of size 3.5 x 3.5 x 0.5 mtr or as per site requirement. including cost of all material as per requirement. (As per UPPCL Drawing)
90	Transformer body earthing complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
91	Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) (As per UPPCL Drawing)
92	Indoor Equipment earthing (11 kv pannels) including cost of G.I. strip, G.I. pipe 1.5” dia 60’ long and other earthing materials. (delta type) both delta earthing will be connected with 32mm round bar (As per UPPCL Drawing)
93	Separate earthing of Indoor Equipment (33 kv control pannel) including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
94	Special earthing of LA including cost of G.I. strip, G.I. pipe 1.5” dia 40’ long and other earthing materials. (delta type)
95	Providing and Making of Outdor Earthing (Eartmat) as per UPPCL Norms.
96	Laying of 11 KV “XLPE” cable 3 x 185/300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable or laying in cable trench and covering with brick and sand as per site requirement. (As per UPPCL Drawing)
97	Rising of cable on DP with GI Pipe 6\\" dia 3mtr long for cable safety.
98	Providing and erection of Special pipe earthing for cable protection.
99	Stringing of Terminal gantry and Making all Jumpers with provided all required material.complete work.
100	Stringing of 33 KV Bus Bar and Making all Jumpers in Switchyard with provided all required material .complete work
101	Providing & grouting of Neutral stand with all required materials.
102	Providing & Grouting of cable stand and fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
103	Writing name on S/S Building 11 KV Switchgear panels & all equipments insatalled in control room & switchyard.
104	Jointing charges of 11 KV “XLPE” C/J kit 3 x185/300 mm2 indoor/outdoor.
105	Installation and connection of 63 KVA T/F with all accessories
106	Fitting & Fixing of TPMO and Fuse set on erected 11 KV D/P.
107	Making of control cable trench with cover and hanger by providing all required materials. as per site requirement.
108	Laying from switchyard to control room for 33 KV panel, CT, VCB, 5 MVA t/F by digging trench and making connection complete. (As per site requirement laying of cable though cable trench if available with covering brick and sand.
109	2 x 2.5 mm2
110	4 x 2.5 mm2
111	Providing and writing of Sub-Station Name & Arrow shine Board Complete.
112	Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
113	Electrical connection of 11 KV switchgear panel and fitting of Bus Bar.
114	Construction of SSO's approached road 1.5 Mtr. wide in Switchyard by laying dry sand and interlocking bricks The work include proper plastering top & side of road and leveling & dressing of earth beneath the brick work on edge.
115	Laying of LT cable 3.5x70 sqmm
116	Outdoor switch yard & approch road colony lighting with Provide 06 no. street light pole,150 watt LED light and all required materials
117	Installation of 33 KV control panel for “VCB” with complete earthing and connection of battery and battery charger/inverter in control room and making all protection equipment connection.
118	installation & Concreting of Stay set complete
119	Filling of sand in cable trench in the Switch Gear Room.
120	Installation of 24 V Battery & Battery Charge/ Inverter with cabinet
121	Erection, grouting, muffing and painting of 2 Nos. ST Poles 11m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
122	Erection, grouting of 2 Nos. PCC Poles 8.5 m long for making DP Structure including fabrication & fixing of M.S. Channel, M.S. Angle, TPMO, Fuse Set, disc Insulators etc. The work includes supply and fixing of necessary clamps with nuts, bolts and washers. The work also includes grouting of Double pole support in C.C. 1:4:8 (cement, sand & brick ballast) in block of size (0.45m x 0.45 x 1/6 length of the pole) including earthing of Double pole with M.S. earthing rod complete in all respect.
123	Construction of Fire Wall between Transformers with all required material.
124	Providing of Misc. Items i.e. all type register ,Single Line Diagram ,Shut Down/Breakdown Name Board, Writing name on Substation Building,name of feedar & switchgear (As per UPPCL Drawing)
125	Testing & commissioning charges of Substation.
126	Part A (Materials Provided by contractor) 33 KV line Katarari
127	33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through
128	33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor
129	33KV “V” Type Cross Arm
130	Clamp for 33 KV \\"V\\" type Cross arm & side arm with bolts and nuts
131	Providing 6” dia.MS G.I. pipe 3m long
132	F-bracket for 33 KV
133	Danger Plate with clamp and Nut & Bolt
134	G I Barbed Wire
135	Nut Bolt and washer all sizes
136	‘E’ Bracket for 33 KV
137	Top Channel 125x65 mm, 3200 mm long
138	Ms channel/Dropper
139	Holding clamp for top & dropper
140	PG Clamp Dog to Dog
141	Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp
142	Holding Clamp for GI Pipe & cable
143	Lug for ACSR Dog Conductor
144	Stay Clamp
145	Stay Rod 20x1800mm
146	Stay Wire 7/8 SWG
147	MS Guarding Angle With Clamp
148	GI Wire 6 SWG
149	GI Wire 8 SWG
150	Earthing Rod 20x2500
151	33KV Polymer pin insulator
152	Disc Fitting 33KV
153	Disc Insulator 33KV
154	Al. Paint
155	Red Oxide Paint
156	PART – B- WORKShifting,loading and carriage of following materials on private truck at store centre Deoria & Un-loading of the same with proper stacking at work site .
157	P.C.C. Pole 9M long
158	S.T. Pole – 11 Mtr. Long
159	33 KV ‘XLPE’ Cable 3x300mm²
160	ACSR ‘Dog’ Conductor
161	Digging & laying of 33 KV Cable with sand & brick and back filling/HDD Method by drilling machine as per site requirement.
162	Laying of 33KV ‘XLPE’ cable in air and Loop
163	Cable jointing charges of 33 KV XLPE Cable Outdoor & St.TH
164	GI Pipe Earthing Complete for Cable jointing Kit with materials
165	Erection of Double pole structure on 9 mtr PCC Pole for One side O/H and One side Cable Rising including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Droper Chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
166	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for single circuit ( 'V' type cross arm 100 x 50 x 6 mm/Side Arm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO.
167	Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
168	Erection of four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete as per RESSPO) .
169	Erection of Double pole structure on 9 mtr PCC Pole for Cable Rising including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (Droper Chanel with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete) .
170	Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
171	Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
172	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.
173	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
174	Part A (Materials Provided by contractor) 04 No. 11 KV line
175	F-bracket for 11 KV
176	Top Channel 100x50x6 mm, 2400 mm long
177	Holding Clamp for Top Channel & Ms channel/Dropper
178	Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts
179	Number Plate with clamp and Nut & Bolt
180	Danger Plate with clamp and Nut & Bolt
181	G I Barbed Wire
182	Nut Bolt and washer all sizes
183	PG Clamp
184	Bracing set 4.3 x 4.3 Mtr Angle Iron 65x65x6 mm with holding clamp
185	11 KV E Bracket
186	11 KV T-off Channel
187	T-off Channel holding clamp with Bolts and Nuts
188	MS Guarding Angle With 4 no. Clamp
189	GI Wire 6 SWG
190	Gi Wire 8 SWG
191	Stay Rod
192	Stay wire 7/8swg
193	Stay Clamp
194	Al. Paint
195	Red Oxide Paint
196	11 KV \\"V\\" tyoe cross arm 65x65x6 mm, M S Angle
197	Polymeric 11KV Pin Insulator
198	Disc Fitting for T&C 45 KN
199	Disc Insulator T&C 45 KN
200	Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc
201	11KV Cable 3x185sq.mm J/kit
202	Ms Channel/Dropper
203	GI Pipe 6” Dia
204	Holding clamp for GI Pipe and Cable
205	PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Deoria to work site
206	8.5 Mtr PCC Pole
207	11 Mtr STP SP55 Pole
208	ACSR Weasel Conductor
209	11 KV 3x185 XLPE Cable
210	Erection of Single pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for Single circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, barbed wire earthing, etc. complete).
211	Erection of Double pole structure on 8.5 Mtr PCC Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
212	Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above , grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories for double circuit ( 'V' type cross arm 100 x 50 x 6 mm, M.S. Channel (7.9 Kg./M) clamps with bolt and nut, composite polymer pin, insulator, danger board with clamp, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete).
213	Erection of Double pole structure on 11Mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel with clamps, danger board with clamp, barbed wire earthing, etc. complete).
214	Erection of End double pole structure for cable riser on 8.5 mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles , grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories ((M.S. angle iron 65 x 65 x 6 mm bracing with clamps, 100x50mmX2240 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete)) .
215	Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.
216	Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.
217	Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.
218	Digging & laying of 11 KV Cable (Double ckt) in trench with sand & brick and back filling
219	Laying of 11 KV Cable in Air & Looping work Complete
220	Making of J/kit
221	Special pipe earthing
222	Making of Sectional T-off Pole with all fitting complete work.
223	Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place. (Including existing line) Please Enable Macros to View BoQ information

Tender For Under The Electricity Secondary Works Division-Gorakhpur For The Construction Work Of New 33/11 Kv S/S Katarari (2X5 Mva), Construction Of New 33 Kv Line Katarari For New Proposed Substation From 132/33 Kv Substation Bhatwaliya And The Con, Deoria-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us