|
| 1 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.50 m deep for laying of water pipe lines/taking out pipe lines and getting out in soft/loose of soil including forming bottom surface to required level and slope complete all as specified and directed. |
| 2 | Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 2.5 cm soil complete all as specified and directed. |
| 3 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 4 | M&L for rewinding of Non Clog Sewage pumping & dewatering vertical submersible Pump set of capacity 1000-2000 LPM with PVC coated copper winding wire as per existing gauge insulation material, after stripping of existing worn out winding, complete with and including all connected accessories (sand guard, cable packing ring, cable gland ring, bearing, adopter piece, or any spares required for effective working of pump etc) complete, reassembling the same complete all as specified and directed by Engineer In Charge. |
| 5 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pipes of 200 mm dia pressure pipes for water delivery with spigot & socket end, class 'K-9' conforming to IS:8329/2000 (latest version) - suitable for (push on) rubber gasket jointing with inside cement mortar lining with portland slag cement as per IS 455 ;1989 and external metallic zinc coating as per annex A of IS 8329 with finishing layer of bitumin coating as per annex C, duly ISI marked in any length including testing and commissioning complete all as specified and directed. |
| 6 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pipes of 150 mm dia pressure pipes for water delivery with spigot & socket end, class 'K-9' conforming to IS:8329/2000 (latest version) - suitable for (push on) rubber gasket jointing with inside cement mortar lining with portland slag cement as per IS 455 ;1989 and external metallic zinc coating as per annex A of IS 8329 with finishing layer of bitumin coating as per annex C, duly ISI marked in any length including testing and commissioning complete all as specified and directed. |
| 7 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pipes of 100 mm dia pressure pipes for water delivery with spigot & socket end, class 'K-9' conforming to IS:8329/2000 (latest version) - suitable for (push on) rubber gasket jointing with inside cement mortar lining with portland slag cement as per IS 455 ;1989 and external metallic zinc coating as per annex A of IS 8329 withfinishing layer of bitumin coating as per annex C, duly ISI marked in any length including testing and commissioning complete all as specified and directed. |
| 8 | Supplying and laying in trenches centrifugally cast (spun) ductile iron pipes of 80 mm dia pressure pipes for water delivery with spigot & socket end, class 'K-9' conforming to IS:8329/2000 (latest version) - suitable for (push on) rubber gasket jointing with inside cement mortar lining with portland slag cement as per IS 455 ;1989 and external metallic zinc coating as per annex A of IS 8329 withfinishing layer of bitumin coating as per annex C, duly ISI marked in any length including testing and commissioning complete all as specified and directed. |
| 9 | Supply only total residual chlorine test kit CHLOROSCOPE MODEL-C alongwith OT Solution complete all as specified and directed. |
| 10 | Supply, laying and jointing in repairs heavy duty CI/DI Bends (any type, radius and angle ), Tapers any type,( straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, Y junction, Double branch, Cross (all sockets or socket and spigot or all flanged or one end flanged and other ends spigot /socketed), Collars, Caps and Plugs, MJ collar coupling etc complete and conforming to IS : and upto 200 mm bore, complete all as specified and directed. |
| 11 | Supply laying, testing GI tubing 80 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. |
| 12 | Supply laying, testing GI tubing 50 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. |
| 13 | Supply laying, testing GI tubing 40 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. |
| 14 | Supply, laying, testing GI tubing 25 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. Please Enable Macros to View BoQ information |
| 15 | Supply, laying, testing GI tubing 25 mm dia bore medium grade conforming to IS : 1239 with all fittings laid in trenches complete all as specified and directed. Please Enable Macros to View BoQ information |
