|
| 1 | Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion from concrete, brick work, masonry etc., and making good disturbed in natural ground complete all as specified and as directed. |
| 2 | Demolition of plain cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed. |
| 4 | Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. |
| 5 | Rough excavation not exceeding 1.5 m deep and getting out complete all as specified and as directed. |
| 6 | Removing the excavation material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point in soil and rock complete all as specified and as directed. |
| 7 | M&L 75 mm thick hardcore of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 8 | M&L for cement concrete 1:2:4, Type C2, (using 20mm graded stone aggregate), Cement concrete in foundations, filling and mass concrete for interlocking paverblock complete all as specified and as directed. |
| 9 | M & L for PCC 1:3:6 , Type B1 (20mm gradd stone aggregate) as in fixing of RCC/PCC post or similar type of works etc complete all as specified and directed. |
| 10 | M & L for Pre-cast PCC (1:3:6) type C1 (using 20 mm graded aggregate) solid block masonry with solid blocks, exc. 10 cm in width and setting Cm 1:6 complete all as specified and directed. |
| 11 | S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-500D complete all as specified and as directed. |
| 12 | Fixing only chain link fencing including, line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire etc. including dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 13 | Supply only chain link fencing of any size or type complete all as specified and as directed. |
| 14 | M & L Flat/angle iron iron fixed to posts to hold the chain link fencing complete all as specified and directed. |
| 15 | S &F MS 16 to 20mm dia screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other ends each screwed end to be fitted with washers and one hexagonal or square nut exc 15 cm n.exc 22.5 cm long complete all as specified and directed. |
| 16 | M & L 10 mm dia round bars as holding bars for chain link fencing fixed at top and bottem, including linking one to another horigontal bar complete all as specified and directed. |
| 17 | M&L for preparation of new surfaces of steel n. exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 18 | S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining, fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provisioning of galvanised mild steel wire, staples of steel pins etc all as specified and directed. |
| 19 | M&L for cement concrete 1:4:8, Type D2, (using 40mm graded stone aggregate), 75 mm thick in sub-base concrete to pavement complete all as specified and as directed. |
| 20 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 21 | M&L 100 mm thick cement concrete type B-2, 1:2:4 (using 40 mm graded aggregate) as in flooring using extra cement for finishing complete all as specified and as directed. |
| 22 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound using grade 'A' complete all as specified and as directed. |
| 23 | M&L for external plastering 5mm thick in CM 1:4 over 10 mm thick in cm 1:6 on fair faces of brick or concrete, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 24 | M&L for 3 coats of white wash including preparation of new surfaces complete all as specified and as directed. |
| 25 | M&L for 3 coats of white wash including preparation of old surfaces complete all as specified and as directed. Please Enable Macros to View BoQ information |
