|
| 1 | Schedule 'A' |
| 2 | M&L for cement concrete work in pavement Quality Concrete /hard standing of flexural strenght 40 kg/Sqcm in field using 400 Kg of cement per cubic metre,thickness of concrete 20 cm including formwork all as specified and directed. |
| 3 | M&L for Polythene film, black, 50micron laid in floors complete all as specified and directed. |
| 4 | M &L for Forming 20mm thick expansion joints filled with preformed bitumenous filler and top 30mm primed and sealed with sealing compound, grade 'B', 200 mm thickness complete all as specified and directed. |
| 5 | M&L for Forming construction (Dummy) joint for 65mm deep x 10mm wide, filled with sealing compound, Grade-'B', complete all as specified and directed. |
| 6 | M&L for Finishing surfaces of concrete roads, pavements, by brooming. Complete all as specified and directed. |
| 7 | Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete artilcles and precast concrete block walling etc. Complete all as specified and directed. |
| 8 | Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 9 | M&L for Squared rubble walling with Porbandar stone masonary in CM 1:6 brought to courses, complete all as specified & directed by Engr-in-charge. |
| 10 | All as per above item No 8.00,but except stone, Complete all as specified and directed. |
| 11 | M & L for Rendering 10mm thick on fair faces of Porbandar stone masonary surface in CM 1:4 all as specified & directed by Engr-in-charge. |
| 12 | M & L for two coats of cement paint over chalk whitening primer over preparing surfaces plastered or unplastered complete all as specified & directed by Engr-in-charge. |
| 13 | M&L for Preparation of old plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed by Engineer in Charge . |
| 14 | Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete including removing debries ouside MD land all as specified and directed. |
| 15 | M&L for cement concrete 1:4 :8 type D-2 (40mm graded agg) in foundation filling and mass concrete.complete all as specifed and as directed by Engineer in Charge. |
| 16 | M&L for sand filling under paver blocks for cushion Complete all as specified and directed. |
| 17 | M&L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment to match, Complete all as specified and directed. |
| 18 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, finished with grey cement and pigment, complete all as directed. |
| 19 | All as per above item No 17.00 Except Interlocking tiles including filling with sand cushioning ( where ever required ) including levelled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge ( Note :- Sand and PCC shall be paid and measured Separtely ) |
| 20 | S&F in repair aluminium composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panels consists of 3mm thermoplastic core of anti oxidant /ldpe sandwiched between two skin of 0.5mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PVDF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC wall / framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mm x 25mm with 1mm thickness 600mmx600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicon sealant for groove filling, backer rods etc complete all as per manufacturers instructions and all as specified and directed by Engr-in-Charge. Note- The ACP should be installed by authorised company/agent. Make of ACP : - ALUPEX/ALUDECORAL/ALSTRONG/TIM |
| 21 | M&L for Providing and applying minimum 2.0mm thick road / pavement marking strips (retro reflective) n exc 10cm wide of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P cleaning the old marking strip and pavement surface of all dirt, seals, oil grease and foreign material etc complete as per direction of Engineer-in-Charge and accordance with applicable specifications. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premisess complete all as specified and as directed |
| 23 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with CM 1:4 , 15mm tk cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed by Engr-in-charge. |
| 24 | M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over CM 1:3 , 10 mm tk cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed by Engr-in-charge. |
| 25 | Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified and directed. |
| 26 | M&L for Mild steel CRS TMT bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia. complete all as specified. |
| 27 | M & L for Cover slab for drain in 1:2:4,Type B1 (20mm graded aggregate) set in cement mortar 1:6 complete all as directed by the Engr-in-Charge Please Enable Macros to View BoQ information |
