|
| 1 | Schedule 'A' |
| 2 | Repairs to Chair dining JCOs/OR (FD-279, 228, FD/MAP/II/05) |
| 3 | Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:- |
| 4 | Rear leg made of size 30x55x890mm IInd class Hard wood |
| 5 | Front leg made of size 30 x 55 x 460 mm IInd class Hard wood |
| 6 | Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood |
| 7 | Seat stiffener duly holed for canning made out of IInd class Hardwood of size 440x65x30mm |
| 8 | S&F of PVC Shoe |
| 9 | Removing of UNSV /Broken PVC seat of chair dining JCO/Ors and providing new seat 4mm thick with 4x10mm thick Ribs moulded alongwith seat in single piece & screwed with frame Make AMKO. All as specified in drg and as directed by Engr-in charge. |
| 10 | S&F of supporter under PVC seat made of size 30 x 65 x 356 mm 2nd class Hardwood all as specified by Engr-in-Charge. |
| 11 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In-Charge. |
| 12 | Repairs to Chair dining offrs (FD/MAP/II/04) |
| 13 | Removing the following U/S components chair dining and providing new components of size and shape shown in Drg Polishing all exposed parts of chair dining after repairs / replacement of Parts.:- |
| 14 | Rear leg made of size 35x50x 950 mm IInd class Hard wood |
| 15 | Front leg made of size 35 x 50 x 450 mm IInd class Hard wood |
| 16 | Stiffener made out of 20 x 25 x 440 mm 2nd class Hardwood |
| 17 | S&F of PVC Shoe |
| 18 | Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 450x450x75mm thick |
| 19 | Removing of old existing cushion's and replacing with new cushions of size 450x450x75mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified. |
| 20 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In-Charge. |
| 21 | Repairs to Table bed side (FD/E6/MAP/15®) |
| 22 | Removing U/S top and S&F new top made of 19mm thick pre laminated particle board of BWR gde confirming to IS:303 all as shown in drg and directed by Engr-in- Charge |
| 23 | Removing of U/s handle mm long and S&F new handle 100mm long powder coated non ferrous metal alloy all as per drg and as specified. |
| 24 | Removing the u/s Telescopic Channel &S&F new Telescopic Channel duly powder coated and 1.6mm thick |
| 25 | S&F of PVC Shoe |
| 26 | Repairs to Table centre (size 900x450mm ) (FD-274) |
| 27 | Removing the following existing U/S components of Table centre and providing new components of size and shape shown in Drg and polishing all exposed parts of Table centre after repairs / replacement of parts . |
| 28 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 29 | Legs made of IInd class Hard wood |
| 30 | Top battern stiffener short made of IInd class Hard wood |
| 31 | Top batten stiffener long made of IInd class Hard wood |
| 32 | Repairs to PEG TABLE (FD-277, FD-384) |
| 33 | Removing the following existing U/s components of table Peg and providing new components of size and shape shown in drg and polishing all exposed surface of item after repairs / replacement of part:- |
| 34 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 35 | Legs made of IInd class Hard wood |
| 36 | S&F new GI 'L' shaped bracket of size 25mm x 25mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 37 | Repairs to chair writing: (FD - 280) |
| 38 | Removing the following unserviceable components of chair writing and providing new components of size and shape shown in Drg and polishing all exposed parts of chair writing after repairs / replacement of Parts.:- |
| 39 | Rear leg made of IInd class Hard wood of size 890x55x30mm |
| 40 | Front leg made of IInd class Hard wood of size 675x55x30mm |
| 41 | Stiffener made of IInd class Hardwood of size 535x65x30mm |
| 42 | Arm rest made of IInd class Hardwood of size 500x60x25mm |
| 43 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-In_Charge. |
| 44 | Repairs to Chair Easy (FD-229 ,201,17) |
| 45 | Removing the following U/S components chair easy and providing new components of size and shape shown in Drg and Polishing all exposed parts of chair easy after repairs / replacement of Parts.:- |
| 46 | Rear leg made out of 50 x25 x 890mm size IInd class Hard wood. |
| 47 | Front leg made of size 50x25 x 545 mm IInd class Hard wood. |
| 48 | Batten rail under seat frame made out of 50 x 25 mm IInd class Hard wood |
| 49 | Hand rest / arm rest made out of 610x65x25 mm IInd class Hard wood all as specified |
| 50 | Repairs to Teapoy, 600 mm X 450 mm X 540 mm: (FD– 382, 278) |
| 51 | Removing the following U/S components of Teapoy and providing new components of size and shape shown in Drg and polishing all exposed parts of Teapoy after repairs / replacement of parts:- |
| 52 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 53 | Legs made of IInd class Hard wood |
| 54 | Top batten stiffener short made of IInd class Hard wood |
| 55 | Top batten stiffener long made of IInd class Hard wood |
| 56 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 57 | Repairs to table writing,: (FD - 275, 249) |
| 58 | S & F of following u/s components and polishing after repairs :- |
| 59 | Top 18 mm thick PFT (Post Forming Top) pre laminated particle board exterior grade, Lamination (teak Shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 60 | Removing u/s legs , supply and fix new legs of 1st class Hard wood as per existing pattern |
| 61 | Removing u/s drawer and replacing with new drawer made with 12 mm plywood BWR Gde as per existing pattern |
| 62 | Replacement of doors with 18 mm pre -laminated board on one side nature Teak face of Make ACTION TESA with 4 mm thick teak wood beading and piano hinges screwed and new knob all as shown in drg |
| 63 | Dismantling the old unserviceable lock and S&F new brass lock 6 lever make: Harison/Godrej as the existing one, complete all as specified and shown on drawing. |
| 64 | Removing the u/s Telescopic Channel & S&F new Telescopic Channel duly powder coated and 1.6mm thick |
| 65 | Removing the u/s knob & S&F new knobs of aluminium anodized dark brown in shade as per existing one, complete all as specified and shown on drawing. |
| 66 | Repairs to table dining 6/8 persons: (FD - 239,273,376, 165) |
| 67 | Removing the US table top supply and fix new top,6 persons of size 1500x900mm of 18 mm thick pre laminated particle board top one side natural Teak face of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE duly provided with 4 mm thick teak wood edging all around |
| 68 | Removing the US table top supply and fix new top,8 persons of size 1800x900mm of 18 mm thick pre laminated particle board top one side natural Teak face duly of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE provided with 4 mm thick teak wood edging all around |
| 69 | Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood) |
| 70 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 71 | Repairs to table dining 4 persons: (FD/MAP-II/03) |
| 72 | Removing the US table top supply and fix new top of size 1200x900mm of 18 mm thick pre laminated particle board top one side natural Teak face of Make:ACTION TESA / ARCHIDPLY / ASSOCIATE duly provided with 4 mm thick teak wood edging all around |
| 73 | Removing the u/s legs supply and fix new legs of size 60 x 60 x 750 mm of 1st class Hard wood (Teakwood) |
| 74 | S&F new GI 'L' shaped bracket of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-In-Charge. |
| 75 | Repairs to TABLE DRESSING GENTS (FD/E6/MAP/16) |
| 76 | M&L after removing the existing U/s parts from Table dressing Gents, repairing including S&F new parts of Table dressing gents and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing gents with one coat of spirit polish after preparation of surface |
| 77 | Mirror shall be of 5.5 mm thick, Backed by 12mm thick BWR Gde plywood as per IS:303, coved by decoraive mould. |
| 78 | Removing broken /UNSV glass shelves and S&F new Glass shelves of 8mm thick all as per drg |
| 79 | Removing broken / UNSV Glass Holder and S&F new Glass Holder all as specified and shown in Drg. |
| 80 | Removing broken / UNSV Magnet Catch and S&F new Magnet Catch all as specified and shown in Drg. |
| 81 | Upholstering of Sofa Set Five Seater/Sofa Chairs: (FD-281, 373,258) |
| 82 | Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 250 per meter size of cushion 560x520x100mm thick |
| 83 | Replacement of old cushions of Sofa Set Five Seater/Sofa Chairs with newones: (FD-281, 373,258) |
| 84 | Removing of old existing cushion's and replacing with new cushions of size 560 x 520x100mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified. |
| 85 | Repairs to TABLE DRESSING LADIES WITH STOOL (FD/MAP-II/07) |
| 86 | M&L after removing the existing U/s parts from Table dressing ladies repairing including S&F new parts of Table dressing ladies and all as specified and shown in Drg and directed by Engr-in-charge and polishing to table dressing ladies with one coat of spirit polish after preparation of surface |
| 87 | Mirror shall be of 5.5 mm thick, Make ' MODIGUARD ' duly Teak wood 6 mm thick frame and 6 mm thick plywood BWR Gde 6 mm thick on back side of the frame |
| 88 | Top 18 mm thick pre laminated particle board one side Teak finish and one side veneered of Make Action Tesa with 4mm thick Teak wood edging around. |
| 89 | Removing broken Handles, S&F new 75mm long D shaped stainless steel handle as specified. |
| 90 | Removing of existing old UNSV tapestry cloth from cushion and S&F New tapestry cloth duly provided by Zip. Cost of tapestry cloth should be not less than Rs 350 per meter size of cushion 440x350x75mm thick |
| 91 | Removing of old existing cushion's and replacing with new cushions of size 440 x 350x75mm thick 32 mm density of Make : Sleep well /Kurlon/MM Foam approved by GE and covering with existing old tapestry cloth all as specified. |
| 92 | Removing the u/s Telescopic Channel &S&F new Telescopic Channel duly powder coated and 1.6mm thick |
| 93 | Removing broken / UNSV Magnet Catch and S&F new Magnet Catch all as specified and shown in Drg. |
| 94 | HAT STAND WITH MIRROR. (FD-233) |
| 95 | Looking Mirror : M&L for removal of old unserviceable mirror and S&F Looking mirror of size 460x300mmx5mm of approved quality make Modi/ATUL duly fixed in the wooden frame made of teak wood and 6mm thick commercial ply wood finished with french polish of glossy shining to be provided shape and size all as specified by Engr-in-Charge. |
| 96 | Dismantling the old unserviceable Aluminum pegs and S&F new Aluminum pegs to shape and size as the existing one, complete all as specified and shown own drawing. |
| 97 | Dismantling the old UNSV wooden frame S&F new wooden frame made of teak wood shape and size all as specified by Engr-in-Charge |
| 98 | POLISHING TO WOODEN FURNITURE |
| 99 | (i) Material and Labour for scrapping the existing polished surface with proper/suitable sand paper, filling up the crevices and holes with proper wax to make surface even and smooth, preparation of surface and applying One coat of french polish to the following items complete all as specified and as directed.(ii) Work will be executed in BSO's store accn as well as where the furniture exists in different user unit in OTM/Md Accn of Navy at Porbandar & Okha under the jurisdiction of GE Navy Porbandar |
| 100 | Material and Labour for french polishing one or more coats on surfaces of any description, surfaces over 10cm width or girth including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and as directed by Engineer - in - Charge. |
| 101 | Chair dining Offrs (FD/E6/MAP/10(R) ) |
| 102 | Chair easy (FD - 17(M), 229) |
| 103 | Chair dining (FD – 16,228,279) |
| 104 | Chair writing (FD - 20(M), 280) |
| 105 | Peg table (FD - 25(M), 236,384) |
| 106 | Table dining 6 persons (FD - 376, FD - 273) |
| 107 | Table dining 4 persons (FD/MAP-II/03) |
| 108 | Table writing (FD-33(M), 249, 275) |
| 109 | Table 3'x2' w/o drawer (FD-42(M),FD-284) |
| 110 | Table 3'x2' with drawer (FD-41(M), FD-283) |
| 111 | Teapoy (FD - 278, 232) |
| 112 | Table centre (FD - 29(M), 274) |
| 113 | Sofa set 5 seater (FD - 373,281, 258) |
| 114 | REPAIRS TO ALMIRAH LARGE STEEL AND ALMIRAH LARGE STEEL (1/2 H, 1/2 S) (FD-67(M), FD-1031, FD/E6/MAP/18) |
| 115 | Removing worn out legs and S&F new legs made out of 20 gauge MS sheet as per exsting pattern all as specified and directed. |
| 116 | Removing of unsv shelves and S & F new shelves made out of 20 guage MS sheet as per exsting pattern all as specified and directed. |
| 117 | Removing existing broken MS bracket and S&F New MS bracket for fixing shelves as per existing pattern |
| 118 | Removing the U/S locks and S&F new locks with duplicate key ISI marked Make : Godrej |
| 119 | Removing the UNSV broken handle from almirah and S&F new handle to shutter made up of steel chromium plated all as shown in drg and specified |
| 120 | Removing the U/S broken locking device from almirah large steel and S&F new locking device all as specified and shown in Drg |
| 121 | REPAIRS TO ALMIRAH MED STEEL (FD-67(M), FD-1032) |
| 122 | Removing existing brackets and S&F new bracket for fixing shelves as per existing |
| 123 | Removing worn out legs and S&F new legs made out of 20 gauge MS sheet |
| 124 | Removing worn out shelves and S&F new shelf made out of 20 guage MS Sheet as per existing pattern as shown in drg. |
| 125 | Removing the U/S locks and S&F new locks with duplicate key ISI marked Make : Godrej |
| 126 | Removing the UNSV broken handle from almirah and S&F new handle to shutter. New handle shall be of steel chromium plated shown on drg. Make Sunbeam, best quality as approved by GE |
| 127 | REPAIRS TO LOCKER BEDSIDE STEEL (FD-1029) |
| 128 | Removing existing U/S socket of CP rod and S&F new socket for Hanging rod 20 mm |
| 129 | Removing U/S hasp & staple and S&F new haps & staple of 75 mm x 40 mm x 3 mm, all as specified and shown in drg. |
| 130 | Removing unserviceable CP handle and S&F new CP handle 100 mm long for locker steel all as specified and shown in drg |
| 131 | Removing worn out 75 mm long butt hinges and S&F new hinges CP duly rivetted with screws |
| 132 | Removing U/S legs and S&F new leg of U shape channel 100 mm height & 60 mm wide ends plugged with 1 mm thick mild steel sheet, duly welded at both |
| 133 | Removing U/S CP pipe and S&F 20 mm dia CP steel conduct pipe of 1.6 mm thickness |
| 134 | REPAIRS TO TABLE OFFICE CLERK STEEL: (FD-84(M), FD - 1004) |
| 135 | M& L removal of unserviceable top of table in any position & S & F new table top PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade , lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 136 | Removing the u/s drawers / shelves and re fixing duly welded by providing new MS sheet 20 gauge |
| 137 | Welding the frame by providing new MS conduit pipe 25 x 25 mm square 16 gauge wherever necessary |
| 138 | Removing the u/s locks of table supply and fix new lock for drawer with duplicate keys as per existing pattern Godrej/Harrison/Link make |
| 139 | Removing old u/s hard rubber toes and supply and fix new hard rubber toes best quality. |
| 140 | REPAIRS TO Charpoy Folding IP with Hard Top (FD-388 ®) |
| 141 | M&L for removal of old existing unsv plywood, S&F 8 mm thick commercial plywood ISI marked, BWR Grade (Make Archid/ Century/Duro) in two pieces fixed with suitable screw steel all as specified and derected |
| 142 | S&F PVC Shoe |
| 143 | Repairs to Bed Hard 6' x 3' (FD/E6/MAP/8R) |
| 144 | Dismantling of old and unserviceable plywood top from Bed Hard and S&F of new ply top of 12 mm plywood commerical (BWR) make Archid/Duro/Century, all as per size and design shown on drawing and as per existing Bed Hard. |
| 145 | Removing of old and unserviceable head board from Bed Hard S&F of new head Board on Bed Hard. Head board shall be made out of prfelaminated particle board 18 mm thick one side teak finished. Make Novapan/Bhutan teak wood beadidng 4 mm thick all around. All as per size and design shown on drawing and as per existing Beds. |
| 146 | Removing of old and unserviceable foot board from Bed Hard S&F of new foot Board on Bed Hard. Foot board shall be made out of prfelaminated particle board 18 mm thick one side teak finished. Make Novapan/Bhutan teak wood beadidng 4 mm thick all around. All as per size and design shown on drawing and as per existing Beds. |
| 147 | S&F PVC Shoe |
| 148 | REPAIRS TO CHARPOY WITH HARD TOP (DRG NO FD/MAP-II/01) (FD/MAP-II/01) |
| 149 | Removing of old and unserviceable Plytop from Charpoy with hard top and S&F of new 12 mm thick plywood of suitable size, ISI marked, BWR phenol bonded commercial plywood all as shown on drawing and as directed. |
| 150 | Welding to broken joints of Charpoy complete all as directed . |
| 151 | S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top all as shown on drg. |
| 152 | Repairs to Table Computer (TP, FD/E6/MAP/03) |
| 153 | M& L removal of unserviceable top of table in any position & S & F new table top PFT(Post Forming Top) made of 18mm thick Prelaminated particle board exterior grade , lamination (teak shade) extended upto minimum 50mm from the bottom edge fixed in position all as specified and directed. |
| 154 | Removing vertical of table computer and S & F 650mm 150mm with 18mm thick pre-laminated particle board alongwith 4 mm teak wood beading duly polished as per drg. |
| 155 | Removing U/S Key Board tray including telescopic channel and S& F new key board tray with telescopic channel as per drg. |
| 156 | Removing U/S drawer including telescopic channel and S& F new drawer with telescopic channel as per drg. |
| 157 | Removing U/S telescopic channel and S& F new telescopic channel as per drg. |
| 158 | Removing U/S Rectangular PVC Cover and S&F new 25 x 50 mm Rect PVC Cover as per drg and specified by Engr-in-Charge. |
| 159 | Removing U/S legs with nylon buffers and S&F new legs with nylon buffers as per drg and specified by Engr-in-Charge. |
| 160 | REPAIRS TO CHAIR VERANDAH ( FD- FD/MAP_II/15) |
| 161 | Removing u/s , broken seat and back from chair verandah. S&F of new PVC seat and back of 4mm thick made out PVC the grooves of size shown in drg. |
| 162 | Removing of worn out legs of chair verandah of existing size 19mm MS pipe 18 gauge duly welded as per existing size on drg and directed. |
| 163 | Removing of unserviceable PVC shoe of chair verandah S& F with new PVC shoes as per existing size on drg and as directed. |
| 164 | S&F new MS angle supporter under PVC seat made of size 3 x 25 x 420 mm as specified by Engr-in-charge |
| 165 | Repairs to Chair Writing MAP (FD-FD/E6/MAP/12) |
| 166 | Removing of existing unserviceable seat ply including cushion foam and tapestry of chair writing MAP S&F with new seat ply including cushion foam and tapestry as shown in drg. |
| 167 | Removing of existing unserviceable Back ply including cushion foam and tapestry of chair writing MAP S&F with new Back ply including cushion foam and tapestry as shown in drg. |
| 168 | Removing of existing unserviceable handle of chair wittting MAP S&F with new handle as shown in drg. |
| 169 | S&F PVC Shoe |
| 170 | Welding the frame by providing new MS tubular frame 25 x 10 mm 16 gauge wherever necessary |
| 171 | REPAIRS TO CHAIR REVOLVING OF ANY TYPE (TP) |
| 172 | Removing the old seat upholstery of chair revolving & Supplying and fixing new cushion of 75mm thick, 'U' Foam of make \\"SLEEP WELL\\" with cloth cover of approved quality and colour to match all as per existing complete all as specified and as directed. |
| 173 | Removing the unserviceable caster wheel & Supplying and fixing new caster wheel as per existing complete all as specified and as directed. |
| 174 | Removing unserviceable bottom & Supplying and fixing bottom as per existing complete all as specified and as directed . |
| 175 | Removing unserviceable hydraulic gas pump and S&F new hydraulic gas pump as per drg. |
| 176 | Removing unserviceable handle and S& F new handle as per drg. |
| 177 | Repair to RACK SHOE STEEL (FD/E6/MAP/02R) |
| 178 | Removing UNSV Jali framework and S&F new Jali framework made of 3 mm dia MS Rod welded to Main Frame as per drg and specified by Engr-in-charge. |
| 179 | Removing UNSV Main Frame and S&F new Main Frame made of 19mm dia MS Pipe of 18 gauge welded to legs as per drg and specified by Engr-in-charge. |
| 180 | Removing of worn out legs of Rack Shoe Steel of existing size 25 mm MS pipe 18 gauge duly welded as per existing size on drg and directed. |
| 181 | S&F PVC Shoe |
| 182 | PAINTING TO STEEL FURNITURE |
| 183 | i)Preparation of old surfaces of steel furniture with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying one coat of synthetic enamel paint of colour as per existing both inside and outside complete all as specified and as directed to the following items:(ii) Work will be executed in BSO's store accn as well as where the furniture exists in different user unit in OTM/Md Accn of Navy at Porbandar & Okha under the jurisdiction of GE Navy Porbandar |
| 184 | Almirah large steel with shelves FD - 67(M) FD - 1031) |
| 185 | Almirah medium with shelves (FD - 67(M) FD - 1032) |
| 186 | Almirah Large steel 1/2 H, 1/2 S (FD/E6/MAP/18) |
| 187 | Locker Steel Movable (FD - 1029) |
| 188 | Table office clerk steel (FD - 84(M)FD - 1004) |
| 189 | Charpoy Folding IP with hard Top (FD-388 ®) |
| 190 | Chair Varandah (FD/E6/MAP) |
| 191 | Almirah Small Steel 1/2H, 1/2S (FD-1034) |
| 192 | Tepoy Varanda (FD/E6/MAP/17) |
| 193 | Chair School With Hard Board (FD/E6/MAP/05) |
| 194 | Re-caning of Wooden Chairs and Chair Verandah |
| 195 | Re Canning of chairs except chair verandah. Taking down existing u/s old cane from chairs and other furniture like stool dressing, bin soiled linen etc. Cleaning to cane holes, Supply and fix new plastic cane of 2 mm wide, 0.5mm thick, 1/2 round, approved quality \\"GODREJ PATTERN\\" using minimum weight of cane mentioned in drg including removal of existing polishing from the wooden surface and repolishing with french polish 4 mm wide 1/2 round cane to be used as border all around all as shown in drg (Make Maharastra plastic industris or equivalent) (FD-280, 279, 229, 75(M), 244, 250, 252) |
| 196 | Taking down unserviceable plastic cane or nylon newar from chair verandah by supply and fix new plastic cane of 4 mm wide 0.5 mm thick white colour half round. Weaving shall be matt pattern and cane shall be Maharashtra plastic, Industries or Equivalent Matt pattern complete all as specified and as directed by Engineer-in-Charge. (FD-256, FD-359) Please Enable Macros to View BoQ information |
