|
| 1 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 2 | M&L for brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 4 | M&L for rendering 20 mm thick on brick or concrete surfaces in CM (1:4) mixed with WPC for final coat, each layer is 10 mm thick finished surface even and smooth without using extra cement complete all as directed. (Note: WPC @ 2% by weight of cement or as per manufacturer instructions measured and paid sepatarely). |
| 5 | M&L for applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 7 | S&F rolled mild steel section Fe 410 - W (Gde- E- 250) quality \\"B\\" framed work as in doors or gates with frame/chowkat with hand made holdfast made from angle of other section with gusset plates, rails braces, flat etc. complete drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings with sliding door bolts etc. (excluding steel covering which shall be measured and paid separately under respective items in this Schedule) and hanging fastening and fixing at any level in high raised bldg complete all as specified and directed by Engineer-in-Charge. |
| 8 | S&F for MS trusses, purlins, cranes gantries , rails and fastenings and heavy bracket framing (beam, tee angle, channel or flat sections) of Fe290 (Gde E-165) including distance pieces, cleats etc. complete all as specified and directed |
| 9 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290 Gde-E-165 complete all as specified and directed |
| 10 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 11 | M&L for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 12 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and as directed including taking down old one. |
| 13 | Cleaning of 1000 litrs capacity PVC water storage tank by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writting letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed. |
| 14 | S&F in ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of size 25 mm dia complete all as specified and directed. (Minimum weight for 25 mm - 455 gms). |
| 15 | Cleaning of RCC roof tank of capacity more than 25000 ltrs by taking down existing inlet and outlet pipes and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on RCC tank as TANK CLEANED ON ____ (Dt, Month and year) complete all as specified and as directed. |
| 16 | Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. |
| 17 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | M&L for RCC nominal mix M-20 type -A0 (1:1.5:3) (12.50mm crushed stone aggregate) as in slab for footpath, ramp etc. including necessary form work complete all as specified and as directed. |
| 19 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 20 | M&L for Cement concrete 100mm thick type C1 (1:3:6) 20mm graded stone aggregate as in floor finish concrete surface even and rough finish to receive topping layer complete all as specified and as directed. |
| 21 | M&L forscreed bed or bedding layer 15 mm thick in cement mortar (1:6)on floors for laying floor finish complete all as specified and as directed. |
| 22 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed with grey cement and no pigment and pointed in neat cement slurry in floors all as specified and as directed incl taking down old one |
| 23 | Dismantling of old MS seccon concertina coil of any description from RCC / MS fencing post complete all as specified and directed. |
| 24 | S&F punched tape concertina coil made out of cold drawn unalloyed steel wires of dia 2.6 mm having minimum tensile strength of 1670 N per sqmm as per IS 4454 (Part- 1): 2001 with hot dip galvanized as per practice recommended in IS: 2629 and the coatings shall conform to heavily coated hard variety as per table I of IS: 4826 (weight of Zinc coating 230 gram per sqm minimum) and steel strip of size 19 mm X 0.5 mm with hardness of 137 to 187 VPN and zinc coating of 18 to 20 microns, minimum 610 mm dia of coil when closed, (9 Kg ± 5 %) weight of coil with 50 turns & 129 Nos clips (without handles and spikes) and minimum 580 mm dia when opened upto 6 metres, stretched to 6 metres for 50 turns during installations complete all as specified and as directed. |
| 25 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old one pipe complete all as specified and directed. |
| 26 | S&F 110 mm dia PVC branch piece single, (single Y) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one. |
| 27 | S&F 110mm dia PVC (SWR) junction single (Single T) (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one. |
| 28 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc including move to store or otherwise complete all as specified and directed. |
| 29 | M&L Granite (of any type) 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 30 | Dismantling water tanks and removing to store capacity upto 1000 ltr complete all as specified and as directed. |
| 31 | S&F Rotational moulded polyethylene water storage tanks capacity 1000ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 32 | S&F in 600 mm x 450 mm x 75mm thick precast RCPC perforated drain cover slab of 2 MT load bearing capacity with embossing RCPC 2MT complete all as specified and as directed including taking down old unserviceable cover. |
| 33 | Dismantling Plain or corrugated steel sheeting/ fibre glass sheet/polycarbonate sheet, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and directed. |
| 34 | S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 35 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | S&F in 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed |
| 37 | Cutting into existing manhole, 225 mm bore pipe, for connecting new drains making good to pipe and removing cutting out existing benching for and forming branch channel in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, smooth finish and re-forming benching complete all as specified and as directed |
| 38 | M&L including tools and plant required for cleaning of manholes using the cleaning devices as per rule 5 and protective gear and safety devices as per rule 4 of the Prohibition of Employment as Manual scavengers and their Rehabilitation Rules, 2013 and removing blockage if any and removing night soil/ silted sludge/ waste material outside MD land unprohibited by any authority and following the statutory law/ guidelines complete all as specified and as directed. |
| 39 | M&L including tools and plant required for cleaning of blockage of wash basin, floor trap , nahani trap , gully trap (GT) , kitchen, bath etc. (carrying slage ) in any length upto the first manhole by any means (using chemical or any mechanical device) & flushing with water complete all as specified. |
| 40 | M&L including tools and plant required for cleaning of the drain pipes upto 150mm dia by roading from manhole and well flushing with water after cleaning and removing all sludge, dirt and solid contents to a distance n exc 100m and burried in ground (min 30cm below ground level) including necessary excavation returning filling and spreading of bleaching powder complete all as specified. |
| 41 | Scrapping worn out tarfelt and bituminous compound of water proofing treatment over RCC roof by using wire brush and blow lamps including dismantling cracked/broken PCC (if required sweeping, cleaning washing down to remove dust etc and removing rubbish debris etc to a distance n.exc 50 m from the site (s) complete all as specified & directed. |
| 42 | M&L 20 mm thick (avg min thickness) plastering in cement mortar (1:3) finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof mixed with WPC @ 2 - 4% or as specified by the manufacturer. |
| 43 | supply only Integral waterproofing compound for used in plaster of new surface. |
| 44 | Supplying and applying High build elastomeric water proofing coating based on pure, hydrophobic polyurethene, cold applied of spray / brush applied, SmartCare PU Aqua membrane with an elangation of 450% and tensile strength>1.5 MPa as per ASTM D 2370, crack bridging ability upto 4mm, solid content of 60%. The system includes final base preparation, epoxy primer application and applying SmartCare PU Aqua or approved equivalent in two coats with a consumption of 2 Kg per Sqm on a primed surface with Apcoflor HFP 130 Primer, etc., complete as per Manufacturer specification. |
| 45 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 46 | M&L coloured printed glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in cement mortar (1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and directed. |
| 47 | S&F Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.06Sqm but not exc 0.11 Sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in cement mortar (1:6) on floors for laying floor finish all as specified and as directed. |
| 48 | M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including screed bed or bedding layer 15 mm thick in cement mortar (1:6) on floors for laying floor finish complete all as specified and as directed. |
| 49 | M&L 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor and finishing the surfaces fair and even without using extra cement all as specified and directed. |
| 50 | M&L forvitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including rendering 10 mm thick in cement mortar (1:4) on wall for laying floor finish complete all as specified and as directed. |
| 51 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm Each complete all as specified and directed. |
| 52 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm Each complete all as specified and directed. |
| 53 | Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed. |
| 54 | Resecuring or easing & adjusting of shutters without taking down of shutters of any description not exc 2.0 Sqm Each complete all as specified and directed. |
| 55 | S&F factory made solid PVC door frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 56 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles, with particle board core) with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed. |
| 57 | S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and directed. |
| 58 | S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20 (a), fitted to chowkats complete all as directed. |
| 59 | S&F 30 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed. |
| 60 | S&F 35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed. |
| 61 | S&F butt hinges, cast brass, with mild steel hinge pin, bright polished of size 100 mm complete all as specified and directed. |
| 62 | S&F in repair MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed . |
| 63 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed, |
| 64 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 65 | S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 66 | S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 67 | S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 68 | S&F in repair stainless steel door stopper with solid stem and rubber end fixed to doors all as specified and as directed. |
| 69 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads area exceeding 1.5 Sqm complete all as specified and directed. |
| 70 | S&F new sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 Sqm in each pan all as specified and as directed. |
| 71 | S&F in stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed |
| 72 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 73 | Cutting holes in brick walls exc one brick but not exc two brick in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required ® complete all as specified and directed. |
| 74 | S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 75 | M&L PCC (1:2:4) type B1 (20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed. |
| 76 | S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed. |
| 77 | S&F in repair angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed. |
| 78 | S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 79 | S&F in repair tubular towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed. |
| 80 | S&F in repair corner/wall mounted sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed |
| 81 | M&L in repair Vitreous China wash basin, white, flat back, size 550x400 mm including suitable size of CI brackets, brass chromuum plated waste fittings 32 mm dia with long screw shanks and fly nuts, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 82 | S&F in repair 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 83 | S&F in repair chromium plated shower roses with swivel joints, 125mm size including fixing to steel pipe or union all as specified and directed. |
| 84 | S&F in repair chromium plated hand shower helth faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed. (Make : Jaquar or equivalent) |
| 85 | S&F in repair PTMT grating round of size 100mm dia with waste hole of approved design complete all as specified and as directed. |
| 86 | S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 87 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 88 | S&F in repair 25mm dia Powder coated aluminium curtain rod with catrip type fixed on walls complete all as specified and directed. |
| 89 | M&L 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 90 | M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 91 | M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 92 | M&L preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 93 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 94 | M&L for oiling and greasing of rolling shutter of any size and any patterrn incl scrubbing down old greasing complete all as specified and as directed. |
| 95 | S&F in repairs Ball bearing for rolling shutters of suitable size all as specified and directed. |
| 96 | M&L in repair for replacement of old spindle / washer including head for 15 mm dia brass wall mixer / basin mixer complete all as specified and directed. |
| 97 | S&F in repair PVC flush / waste pipe 32/40 mm dia 1150 mm long fixed to walls complete all as specified and as directed. |
| 98 | S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed. |
| 99 | S&F in repair Ball valves high pressure of PTMT with PTMT arm & high density plastic ball screwed for PVC Connection and fixed in cistern of 25mm dia pipe all as specified and as directed. |
| 100 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in PPR pipe line and fixed. |
| 101 | S&F in repair vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including PVC seat cover for pedestal pan complete all as specified and directed. |
| 102 | Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified incl taking down old one. |
| 103 | Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified incl taking down old one. |
| 104 | M&L CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed. |
| 105 | S&F in repair PVC floor trap, setting and jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 106 | S&F in repair 100mm diameter of outlet cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified. |
| 107 | S&F PVC mirror cabinet of size 400 mm x 500 mm with mirror at front view fixed with brass screws and wooden / plastic cleat complete all as specified and directed. (Make :- Prayag, Cat No. 554 or equivalent) |
| 108 | S&F in repair stainless steel kitchen rack of sie 750mm x 750mm x 300mm with 4 shelf made out of 0.8 mm thick sheet fixed with suitable size cromium plated screws complete all as specified and directed. |
| 109 | Taking down aluminium window/ventilator with side hung, top hung or fixed type, sliding shutter of any description. |
| 110 | S&F anodised aluminium door/ window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws, aluminium handles, locking system etc complete all as specified and directed. |
| 111 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD Mrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 112 | S&F anodised aluminium grill, having mesh size 100mmx100mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers Each side insert into the jambs/cill complete all as specified and directed including taking down old one. |
| 113 | M&Lfor PCC (1:3:6) type C2 75 mm thick (using 40mm graded aggregate) as in plinth protection finished the concrete surface even and smooth W/O using extra cement complete. |
| 114 | M&L for two coats of distemper oil emulsion including preparation of old plastered surfaces of wall complete all as specified and as directed. |
| 115 | M&L of old decorated plastered or unplastered surfaces of ceiling and applying one coat of oil emulsion distempler complete all as specified and as directed. |
| 116 | M&L for prepration of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 117 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 118 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Please Enable Macros to View BoQ information |
