|
| 1 | Upgradation/ Installation of 06 Nos Lift in P.M.S.S.Y. Building at S.G.P.G.I. District-Lucknow (U.P.) |
| 2 | Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 3 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge |
| 4 | 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 5 | Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime |
| 6 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 7 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 8 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 9 | Providing and laying \\"brick coba\\" 120mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finised smooth & top |
| 10 | mashed false square 30 cm x 30 cm and side wall parapet shall be mono tythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonany Coba with top finised plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, T& P etc complete for proper completion of work. |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 12 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :. (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. |
| 13 | (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 14 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 15 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 16 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm.width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 17 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 18 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 19 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 20 | Group - C |
| 21 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 22 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 23 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 24 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 25 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 26 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 27 | Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment |
| 28 | 3.5 x 185 sq.mm |
| 29 | 3.5 x 35 sq.mm |
| 30 | SUB-HEAD II - FANS & LIGHT FIXTURES: |
| 31 | Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect. |
| 32 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan |
| 33 | Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. |
| 34 | 450mm EXHAUST FAN |
| 35 | SUBHEAD- III: DISTRIBUTION BOARD |
| 36 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 37 | 4 way (4+12) Double door |
| 38 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 39 | Single pole |
| 40 | Single pole and Neutral |
| 41 | Triple pole and Neutral |
| 42 | Supplying and fixing following rating, four pole, (three phase and neutral) SPN, 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 43 | Cubical panel board (MCCB Type) |
| 44 | Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. |
| 45 | The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. |
| 46 | Incoming : |
| 47 | 1 No 200 Amp. 4P MCCB of 25KA Breaking capacity |
| 48 | Outgoing : |
| 49 | Phase indication lamps on each outgoing to be provided. |
| 50 | 8 No. 63 Amp 4P MCCB |
| 51 | Panel described as above |
| 52 | SUBHEAD: - V - EARTHING |
| 53 | Supply and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects. |
| 54 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 55 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 56 | SITC OF 20 PASSENGER, 1360 KG, BED/GOOD CUM PASSENGER ELEVATOR, SPEED 1.0 MPS, G+4 (5 STOPS, 5 OPENING), CAR DIMENSIONS 1300 MM WIDE X 2400 MM DEEP X 2300 MM HIGH WITH DOOR OPENING 1100 MM WIDE 2100MM HIGH DOORS & WALLS SSHL-304 FINISH WITH 2MM THICK PVC FLOORING (BLACK) USED LIFT FOR APPROVED MAKE JONSAN, SCHINDLERS, OTIS, THYSSEN KRUPP LIFT NO 1 &2 |
| 57 | SITC OF 26 PASSENGER, 1768 KG, BED/GOOD CUM PASSENGER ELEVATOR, SPEED 1.0 MPS, G+4 (5 STOPS, 5 OPENING), CAR DIMENSIONS 1600 MM WIDE X 2400 MM DEEP X 2300 MM HIGH WITH DOOR OPENING 1200 MM WIDE 2100MM HIGH DOORS & WALLS SSHL-304 FINISH WITH 2MM THICK PVC FLOORING (BLACK) FOR APPROVED MAKE JONSAN, SCHINDLERS, OTIS, THYSSEN KRUPP LIFT NO 3 TO 6 |
| 58 | 12U 600×600 Rack – Technical & Mechanical Specification The rack is 42U in height (approx. 2000 mm external height), 600 mm wide, and 600 mm deep. It is constructed from CRCA steel of 1.2–1.5 mm thickness with a static load capacity of 200–300 Kg and a modular/ welded frame design. The finish is powder coated, 60–80 micron, available in black or grey. The front door is made of toughened glass with lock and handle, while the rear door is perforated steel with lock and handle. Side panels are (MAKE-COMRACK +SMC RACK) |
| 59 | • Ports: 16 × 10/100/1000 Mbps RJ-45 PoE+ ports, 2 × Gigabit SFP uplink ports, PoE Standard: IEEE 802.3af/at (PoE/PoE+) compliant, PoE Budget: Up to 250W (max 30W per port), Switching Capacity: 36 Gbps , Packet Forwarding Rate: 26.78 Mpps, Transmission Distance: Up to 250 meters in Extend/CCTV mode, MAC Address Table: 8K entries, auto-learning & aging , Jumbo Frame: 9K supported, Flow Control: IEEE 802.3x full-duplex & backpressure half-duplex, VLAN: Port-based VLAN, CCTV VLAN isolation mode (MAKE-D link ) |
| 60 | 5 MP Fixed Lens Dome IP Camera BIS ER, STQC and UL compliant, Make in India Class I category device with advanced analytics and onboard SD card support up to 2TB, including encryption capabilities. 2.8 mm Fixed Lens , IP66, IP67, IK10 Rating , ONVIF Profile S, G, T, M , H.265 HEVC Licensed Storage , Gore Vent In Casing Gyro based Image Stabilization (MAKE-Impact) |
| 61 | 16XTS-NA Managed 8-Port 10GE 8-Port SFP+ 16-/Channel 4K , 2 SATA • High decoding capability for Ultra 4K HD viewing and recordingIH+265/H.265/H.264 video formats Up to 10 channel inputSupports live view, storage, and playback of the connected camera at up to 8MP resolution, 1×RJ45 self-adaptive 10/100 Mbps network interface HDMI and VGA simultaneous outputHDMI Video output at up to 4K (3840 × 2160) resolution IH+265 compression effectively reduces the storage space and costs by up to 75%VLAN: Isolating ports 1-16 from each other can effectively suppress network storms and improve network performance EXTEND: Supports 250meters long distance power supply (recommended cat 5 or above) PoE: Automatic detection power of port, power off and restart the device if find PD device crash QoS: Prioritize the identified video data to make video transmission smoother (MAKE-Impact) |
| 62 | 10 TB HDDHDD, 3.5\\" SATA III 6Gb/s, 7200 RPM, 256MB Cache, 24×7 operation, workload up to 550TB/yr, MTBF 2.0M hrs, suitable for Server / NVR / Data Center applications (Make-WD) |
| 63 | AMP Cat6 UTP Cable, 23AWG solid bare copper, 4 pair, 305m box, ANSI/TIA-568-C.2 compliant, supports up to 1Gbps @ 250MHz, LSZH/PVC jacket, suitable for structured LAN cabling (Make-AMP) |
| 64 | Cat6, 24 port loaded Jack Panel (Make-AMP) |
| 65 | Cat6 STP Information Outlet (I/O), shielded RJ45 modular jack, 8P8C, ANSI/TIA-568-C.2 compliant, 250MHz performance, IDC termination, compatible with AMP faceplates & patch panels (Make-AMP) |
| 66 | Cat6 SL Series Patch Cords - 1 Mtr (Make-AMP) |
| 67 | VA 1kva UPS ofline , True Double Conversion, 230V AC single phase input & output. Capacity: 1000VA / 800W with high efficiency >90%. Battery: Inbuilt SMF batteries, backup time approx. 10 minutes at full load. Display: LCD/LED for status, input/output voltage, load & battery level. Protection: Overload, short-circuit, surge & battery deep discharge protection. (Make-Emerson) |
| 68 | 55” Indoor Commercial Display, 4K UHD resolution 3840×2160, LED backlit panel. Brightness: 500–700 nits, high contrast ratio, 178° wide viewing angle. Connectivity: HDMI, DisplayPort, USB, LAN, RS232, Audio Out. Features: 24×7 operation, slim & narrow bezel, wall or stand mounting support. Applications: Digital signage, retail showrooms, meeting rooms, and control centers. (Make-SAMSUNG) |
| 69 | SUB-HEAD II - Installation/Implementation Charges JOB WORK |
| 70 | Installation of Rack – includes unpacking, assembling, fixing of rack accessories (PDU, fans, shelves, cable managers, blanking panels), earthing connection, dressing of cables, labeling, and final alignment at site. |
| 71 | Laying of Cat6 UTP Cable – includes routing through PVC/conduits/cable trays, dressing, ferruling, tagging, termination at both ends, testing, addressing, and labeling (per meter basis). |
| 72 | Installation of Patch Panel – includes mounting of panel in rack, punching of Cat6 cables on I/O blocks, ferruling & labeling of ports, dressing with cable manager, testing and addressing of all terminated points (per PORT basis). |
| 73 | Installation of IP/CCTV Camera – includes mounting of camera on wall/ceiling/structure, fixing of junction box, termination of network/power cable, ferruling & labeling, angle adjustment, focusing, testing and addressing in NVR/VMS (per camera basis). |
| 74 | Installation of Network Switch – includes mounting of switch in rack, fixing with cage nuts & screws, connecting uplink/downlink cables, connecting to PDU for power, dressing of patch cords with cable manager, labeling of ports, testing and addressing (per switch basis). |
| 75 | By back cost of lifting including dismenting all complete (old Exiting Lift) |
| 76 | GST Extra as applicable Please Enable Macros to View BoQ information |
