|
| 1 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item-A+B) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, all complete as per approved design, specification and direction of E/I. |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, royaly and taxes all complete as per building specification and direction of E/l. |
| 3 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All wrk up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 7 | Providiag designation 75B brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. |
| 8 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).In Lintel |
| 10 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I. |
| 11 | Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 12 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :Kiln seasoned and chemically treated hollock wood(50x20 mm) |
| 13 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete |
| 14 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 15 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I. |
| 16 | Providing and fixing factory made UPVC glazed/wired mesh window/door frame of Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). |
| 17 | Providing 12mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 18 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 21 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. |
| 22 | Providing TMT steel reinforcement 8mm, 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.---8mm dia bar - |
| 23 | 10mm dia bar - |
| 24 | 12mm dia & above bar - |
| 25 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. |
| 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Providing and Fixing Mineral fibre false ceiling tiles at all hight size 595x595 mm of approved texture , design and pattern. The tilesshould have humidity Resistance (RH) of 99% , light reflectance 85% , fire performance as per (BS 476 pt -6 &7 ) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanised iron section of 0.33 mm thick (galvanised @ 120gsm) comprising of main T-runner of 15x32 mm of length 3000 mm , cross T of size 15x32 mm in length 1200 mm secondary . the work shall carried out as per specification , drawing and as per direction of Engineer-in-Charge . With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) |
| 28 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 29 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \\"p\\" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.--(c)580mm long with 10 litre low level P.V.C. cistern |
| 30 | Supplying, fining and fixing viterous white glazed earthen ware Indian squatting type 600x350mm urinal plate of Parry Hindustan or any other I.S.S approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1 M long 5 liters capacity C.I. automatic flushing cistern of Reliance or any other approved make with fittings R.S. or C.I brackets 15mm and 45 cm long alkathene/P.V.C pipe, standard G.I. flush pipe for back and front with spreader fittings and brass coupling etc. 15 mm C.I body brass spindle stop cock of weight not less than 450 grams. all complete including painting of exposed parts with two coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as per specification and direction of E/I. (b)450mm x 350mm Size (Small) |
| 31 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20mm dia |
| 33 | 32mm dia |
| 34 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (weight not less than 350 gms.) with extra socket all complete as per specification and direction of E/l. |
| 35 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/l.--15mm dia Brass Stop Cock |
| 36 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. |
| 37 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door - 110mm |
| 38 | Bend 87.5° - 110mm |
| 39 | Shoe (Plain) - 110mm |
| 40 | Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 41 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 42 | Carriage of materials including loading, unloading, stacking all complete as per specification and direction of E/I. (i) Cement |
| 43 | (ii) Sand |
| 44 | (iii) Stone Chips |
| 45 | (iv) Steel |
| 46 | (v) Bricks |
| 47 | S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required .-- 20 mm PVC coduit. |
| 48 | 25 mm PVC coduit. |
| 49 | \\"Twin control point wiring in PVC conduit, with modular type switch\\". Twin Control light point with 1.5 sq.mm FR PVC insulated copper conductor singlw core cable in surface/ recessed PVC conduit, 2 way modular type switch, modular plate, suitable size G.I. box etc. as required. |
| 50 | Power plug wiring in PVC conduit (2x4 sq.mm):- Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper cinductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. |
| 51 | Circuit / submain Wiring in PVC conduit :- Wiring for Circuit / submain wiring along with the following size PVC / insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. 2x1.5 sq mm+1x1.5 sq mm earth wire |
| 52 | 2x2.5 sq mm+1x2.5 sq mm earth wire |
| 53 | S/F Modullar type switch / socket :- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections as required. 5/6 amps , one way switch |
| 54 | 15/16 amps , one way switch |
| 55 | S/F Modullar type electronic fan regulator :- Supplying and fixing stepped type electronic fan regulatar on the existing modular plate and switch box including connections as required. |
| 56 | S/F light plug point with modular type accessories :- Supplying and fixing suitable size G.I boxwith modular plat and cover in front on surface or in recess with including provideng and fixing 3 pin 5/6 amps modular socket out let and 5/6 amps modular type switch in connection painting etc as required. |
| 57 | S/F power plug point with Piano type accessories :-Supplying and fixing suitable size G.I box with modulaer plate cover in front on surface or in recess in front including provideng and fixing 6 pin 15/16 amps socket out let and 15/16 amps modulaer switch in connection painting etc as required. |
| 58 | S/F Ceilling rose:- Supplying and fixing 3 pin 5ams Ceilling rose on the existing junction box/ wooen including connection etc as required. |
| 59 | S/F batten holder:- Supplying and fixing batten /angle holder including connection etc as required. |
| 60 | S/F S.P.MCB DB :- Supplying & fixing following way single pole neutral sheet MCB distriution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted with complete job. 2 Way Single door |
| 61 | 4 Way Single door |
| 62 | S/F \\"B\\" series, S.P MCB :- Supplying & fixing 6amps to 32 amps rating 240 volts \\"B\\" series miniature circuit breaker suitable for lighting and other loads of folloing poles in the existing MCBDBcomplete with connection testing and commissioning etc. |
| 63 | S/F Four pole MCB isolator :- Supplying & fixing following rating four pole 415 volts isolator in the existing MCBDB complete with connection testing and commissioning etc. 63 amps |
| 64 | Supplying fitting & Fixing LED Bulb 15/16 Watt |
| 65 | 1' X 1' LED Panel Light |
| 66 | Supplying fitting & Fixing Ceilling fan |
| 67 | Supplying and fixing of 1x40 W tube light fitting single box type with tube |
| 68 | Supplying fitting & Fixing Recess Mounting LED Square Down light 2X2 36 Watt |
| 69 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc,. Including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 70 | Providing and fixing precoated galvanised iron profile sheet (size,shape and pitch of corrugation as approved by Engineer-in-charge) of totalcoated thickness 0.50mm (base metal of minimum 0.45 mm thicknesswith total coating thickness of 0.05 mm ) with zinc coating 120 grams per sqm as per IS :277 , in 240 mpa steel grade , 5-7 micron epoxy primer on both side of sheet and polyester top coat 15-18 microns. excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required. |
| 71 | Supplying G.I Pipe (Tata Marked/Equivalent)as per IS-1239(part-1/2004 ISI mark/ medium quality-65mm) |
| 72 | Unskilled Labour For Fitting/fixing |
| 73 | Unskilled Labour For Fitting/fixing |
| 74 | Add 18% GST |
| 75 | Add 1% Labour Cess Please Enable Macros to View BoQ information |
