|
| 1 | Stripping out taking down existing water proofing treatment from roof slab and parapet walls. Cement plaster including hacking for key, raking our joints and scrubbing down with water etc to receive plaster. |
| 2 | Demolition of cement concrete (reinforced) of any description and in any position not othrtwise speciaally provided (roof rcc water tank) |
| 3 | S&F framed worked such as grills, gratings etc with ends of bars shouldered and/or rivetted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; frameworks of water tanks and similar work conforming to be Fe 290. Gde-E-165. |
| 4 | M&L for screed bed or bedding layer of mortar 25 mm thick for laying floor finishes in CM 1:3 |
| 5 | M&L for providing WPT by using membrane over roof & vertical surface, consisting of applying oil bonded bituminous primer coat at 0.30 kg/m2 on a clean & dry surface & then providing a layer of APP modified membrane 3mm thick weighing approx. 4 kg /m2with non woven polyester reinforcement with very thin polyethylene film on both side with thermofusion process by gas regulated torch & finally applying one coat of super silver sheld aluminium based bituminous paint all as per specification & as directed by E-in-C. Make :- IWL/TIKITAR/STP |
| 6 | Dismantling manglore pattern roofing tiles single layer |
| 7 | Dismantling battens spaced exc. 15 cm for tiles, shingles etc. of any size including tiling fillets. |
| 8 | S&F second class hardwood exc 5 & not exc 15 sq cm |
| 9 | S&F Ridge or hip tiles to suit Manglore pattern of roofing tiles, bedded and jointed in cement mortar 1:6. |
| 10 | M& roof tiles manglore pattern interlocking at side joints laid dry |
| 11 | Fixing only roof tiles manglore pattern interlocking at side joints laid dry except tiles |
| 12 | M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 |
| 13 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tappinf screws as specified (MAKE TATA,JSW) |
| 14 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tappinf screws as specified (MAKE TATA,JSW) |
| 15 | M&L for PCC 1:2:4 type B0 12.5 mm graded aggregate over roof for levelling copings |
| 16 | M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer. |
| 17 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 to plastering as specified. (work in foul position) |
| 18 | M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:1:6 |
| 19 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store and refixing old steel tubes in new or old position (Walls, ceiling, floors, etc.) for bore of pipe 20 mm |
| 20 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store and refixing old steel tubes in new or old position (Walls, ceiling, floors, etc.) for bore of pipe 15 mm |
| 21 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store and refixing old steel tubes in new or old position (Walls, ceiling, floors, etc.) for bore of pipe 25 mm |
| 22 | S&F of GI tube 20 mm dia ISI marked 'medium grade' galvanised with all fittings and fized complete to walls and ceiling or iron at any height as per direction of EIC Make TATA/JINDAL/SAIL . |
| 23 | S&F of GI tube 15 mm dia ISI marked 'medium grade' galvanised with all fittings and fized complete to walls and ceiling or iron at any height as per direction of EIC Make TATA/JINDAL/SAIL . |
| 24 | S&F of GI tube 25 mm dia ISI marked 'medium grade' galvanised with all fittings and fized complete to walls and ceiling or iron at any height as per direction of EIC Make TATA/JINDAL/SAIL . |
| 25 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part I, capacity of tank 1000 lts. Except water tanks |
| 26 | Disconnecting existing tanks setting aside (or lowering if required) for repairs cleaning etc. and hoisted if required reconnecting and refixing in position capacity exc 500 lit and n exe 1000 lit |
| 27 | S&F stop valves cast copper alloy, screwed down high pr. with crutch or butterfly handle screw both ends for iron pipes or for unions and fixed in repairs bore dia of pipe 20mm. |
| 28 | S&F stop valves cast copper alloy, screwed down high pr. with crutch or butterfly handle screw both ends for iron pipes or for unions and fixed in repairs bore dia of pipe 25 mm |
| 29 | S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed bore of pipe 25mm. (Minimum weight 15mm-142gms/ 20mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms) |
| 30 | S&f nipple suitable for HDPE water tanks min weight 15 mm-38 gms /20mm-45 gms/25mm-65gms-25 mm |
| 31 | S&f nipple suitable for HDPE water tanks min weight 15 mm-38 gms /20mm-45 gms/25mm-65gms-20mm |
| 32 | S&f nipple suitable for HDPE water tanks min weight 15 mm-38 gms /20mm-45 gms/25mm-65gms-15 mm |
| 33 | Felling of trees exc 30cm but n exc 100cm including cutting of trunk, and branches and stacking of serviceable materila and disposal of unserviceable material to a distance n exc 50m and clearing site |
| 34 | Cutting holes into or through stone walls built in cement mortar and making good in cement mortar or cement concrete 1:2:4 Type B-1 as required for superficial area of hole exc 150 sq cm but n Exc. 400 sq cm. |
| 35 | Removing surplus excavted and demolished material to a distance exc 500m but n exc 1.5 km and depositing where directed. Soil ,rock, P.C.C. Please Enable Macros to View BoQ information |
