|
| 1 | Surface excavation averaging 15cm deep and n.exc 30cm deep and getting out in hard/dense soil complete all as specified and directed |
| 2 | Rough excavation not exe. 1.5 m deep and getting out in soft /loose soil complete all as specified and directed |
| 3 | Excavating in post holes (or similar holes) each not exceeding 0.5 cu. m, getting out in hard/ dense soil and removing surplus soil to a distance exceeding 500 m and making good surface. |
| 4 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole , laying of UG cables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in hard/dense soil complete all as specified and directed. |
| 5 | All same as per item No 4 here-in-above but excavation in soft/ loose soil -do- |
| 6 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft / loose complete all as specified and directed |
| 7 | Removing excavated surplus soil to a distance out side vicinity of MD land and depositing where directed complete all as directed. |
| 8 | M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm , deposited spread as subbase to inter locking tiles in layers n.exc 15cm thick , watered & well rammed to true surface complete all as specified and directed. |
| 9 | M&L for anti-termite treatment to the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & as directed |
| 10 | M&L for anti-termite treatment to the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified & as directed |
| 11 | M&L for anti-termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & as directed |
| 12 | M&L for anti-termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & as directed |
| 13 | M & L for PCC 1 :4 : 8 type D2 using 40 mm graded crushed stone aggregate as in foundation filling & mass concrete complete all as specified and directed |
| 14 | M & L for PCC 1 :2 : 4 type B2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed |
| 15 | M&L for Precast Reinforced cement concrete 1:2:4 type B1 using 20 mm aggregate stone aggregate as in cover slab to Man holes set and jointed in cement mortar 1:4 complete all as directed (Note: Reinforcement shall be measured and paid seperately.) |
| 16 | M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundations including rafts, footings, foundation beams, bases for columns, mass concrete and the like.Note :- Reinforcement & formwork shall be measured and paid for separately |
| 17 | All same as per item No 16 here-in-above but as in columns , pillars, piers, posts and struts etc. -do- |
| 18 | All same as per item No 16 here-in-above but as in Beams, cantilevers, bressummers, lintels over 1.5m span etc -do- |
| 19 | All same as per item No 16 here-in-above but as in slabs supported on walls etc -do- |
| 20 | All same as per item No 16 here-in-above but as chajja -do- |
| 21 | Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO, Acco Proof, Impermo, Aqua flex as approved. |
| 22 | M&L for brick work with old size factory moulded Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified. |
| 23 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete |
| 24 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete. |
| 25 | Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete. |
| 26 | Form work to rough finished surface of sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 27 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon- tal or sloping and similar work exc 10cm but n exc 20cm wide. |
| 28 | S& F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan |
| 29 | All same as per item No 28 here-in-above but frame size 65 x 125 mm double rebate -do- |
| 30 | S&F 28-30 mm thick Prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 31 | S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified |
| 32 | M&L in repair for 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work/hinges as in cupboard shutters, shelves, Kitchen cabinets etc with & including necessary 19mm wide & 6mm thick Teak wood beading / edging / lipping fixed with nails to particle board complete all as specified & as directed. |
| 33 | S&F 250 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified. |
| 34 | S & F 150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed. |
| 35 | S&F 100 mm size butt hinges, medium weight coldrolled mild steel and fixed . |
| 36 | S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed. |
| 37 | S&F 25 mm dia stainless steel Drapery curtain rod complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed. |
| 38 | S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed to steel/aluminium window and ventilator compete all as specified as directed by Engineer -in -charge . ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building) the rates includes providing of MS beads of standard section fixed with SS screws) |
| 39 | S&F in repair 25mm dia stainless steel curtain rod decorative type curtain rods.along with pair of steel finale brackets fixed with plastic rawl plug & CP steel screws complete all as specified and as directed. |
| 40 | S&F anodized luminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators and window chowkat and shutter, cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections, including fixing sheet glass and necessary fittings complete, screws plugs, handle, tower bolt, stay hooks etc., all as specified and directed. Notes : (i) Weight of aluminium sections shall only be measured. (ii) Sheet glass will be measured and paid separately under supply only item. |
| 41 | Material and labour for Aluminum powder coated sliding window with aluminium powder coated three track frame of size 116mm x 25mm & 1.6 mm thick with 3 Nos sliding shutters of powder coated aluminum section (top rail bottom rail and style of size 50mm x 25mm & 1.4mm thick) screwed to walls/floor including provn of tinted sheet glass panels of 5mm thick fitted in pannels (2 Nos) and one shutter with stainless steel wire cloth 0.36 mm nominal dia and width of aperture 1.40mm with and including necessary locking device, jointing cleats, glazing clips, rubber packing beading , aliminum bidding and screws etc. complete all as specified and as directed . |
| 42 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought , cross sectional area exceeding 3 Sqcm but n.exc 6 Sq cm fixed with nails complete all as directed. |
| 43 | S&F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed |
| 44 | S&F mild steel tubular work in tubular trusses, roof trusses (framed), trussed, purlins, crane gantries, rails and fastemings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 with one coat of zinc chromate primer paint. |
| 45 | S&F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 46 | All as per serial item No. 45 here-in-before but 5mm dia -do- Please Enable Macros to View BoQ information |
| 47 | All as per serial item No. 45 here-in-before but 5mm dia -do- Please Enable Macros to View BoQ information |
