|
| 1 | CHAIR DINING (FD-279) |
| 2 | Material and labour for front legs of chair dining all as per respective drawings made out of 1st class hard wood after removing old/ damaged legs to match with the existing parts duly polished complete all as specified and as directed. Rest all as per drg. Drg No FD-279. |
| 3 | All as per serial item No.1.01 here-in-before but for rear legs. |
| 4 | All as per serial item No.1.01 here-in-before but for seat side rail (canning patti). |
| 5 | All as per serial item No.1.01 here-in-before but for front rail (canning patti). |
| 6 | All as per serial item No.1.01 here-in-before but for stiffener. |
| 7 | All as per serial item No.1.01 here-in-before but for back rest. |
| 8 | Removal of u/s cane of seat and M&L for recanning of complete seat with plastic cane of Make : Premium all as per Godrej pattrn as approved. |
| 9 | Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood duly polished if support required for chair dining complete all as specified and as directed. |
| 10 | M&L french polishing of complete chair exposed to view all as specified and directed by Engr-in-Charge. |
| 11 | CHAIR EASY (FD-229) |
| 12 | Material and labour for rear legs of chair easy all as per respective drawings made out of 1st class hard wood after removing old/ damaged legs to match with the existing parts duly polished complete all as specified and as directed. Rest all as per drg. Drg No. FD-229. |
| 13 | All as per serial item No.2.01 here-in-before but for front legs. |
| 14 | All as per serial item No.2.01 here-in-before but for seat side rail (Cane patti). |
| 15 | All as per serial item No.2.01 here-in-before but for front rail (Cane patti). |
| 16 | All as per serial item No.2.01 here-in-before but for arm rest (Hands). |
| 17 | All as per serial item No.2.01 here-in-before but for back rail (Cane patti). |
| 18 | All as per serial item No.2.01 here-in-before but for stiffener. |
| 19 | Removal of u/s cane of seat and back and M&L for recanning of complete seat and back with plastic cane of Make : Premium all as per Godrej pattern as approved. |
| 20 | Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood duly polished if support required for chair Easy complete all as specified and as directed. |
| 21 | M&L french polishing of complete chair exposed to view all as specified and directed by Engr-in-Charge. |
| 22 | CHAIR WRITING (FD-250/280) |
| 23 | Material and labour for front leg of chair writing made out of 1st class hard wood to match with the existing parts duly polished after removing old/ damaged legs complete all as specified and as directed. Rest all as per drawing. Drg No FD-250/280. |
| 24 | All as per serial item No.3.01 here-in-before but for rear leg. |
| 25 | All as per serial item No.3.01 here-in-before but for seat side rail (canning patti). |
| 26 | All as per serial item No.3.01 here-in-before but for seat front rail (canning patti). |
| 27 | All as per serial item No.3.01 here-in-before but for back rest. |
| 28 | All as per serial item No.3.01 here-in-before but for stiffener. |
| 29 | All as per serial item No.3.01 here-in-before but for arm rest (hands). |
| 30 | Removal of u/s cane of seat and m&L for recanning of complete seat with plastic cane of Make : Premium all as per drg Godrej patten as approved. |
| 31 | Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood duly polished if support required for chair writing complete all as specified and as directed. |
| 32 | M&L french polishing of complete chair exposed to view all as specified and directed by Engr-in-Charge. |
| 33 | TABLE WRITING (FD-249,275) |
| 34 | Taking out old u/s right leg and s/F of new leg made out of 1st class wood leg made out of 35x55x720mm in finished state. |
| 35 | All as per item No as per 4.01 above left side leg size 35x55x720mm. |
| 36 | All as per item No as per 4.01 above but top long rail under the top of size 35x55mm. |
| 37 | All as per item No as per 4.01 above but u/s top short rail of size 35x55mm |
| 38 | All as per item No as per 4.01 above but u/s sifffner in between legs and cabinet of size 35x55mm |
| 39 | Taking out u/s drawer and S&F of new drawer made of 18mm thick pre laminated particle board ext grade and back also with 18mm thick pre laminated particle board ext grade under the bottom of drawer |
| 40 | Taking out old u/s back of box which houses the drawer and cabinet and S&F new back made out of 18mm thick pre laminated particle board ext grade |
| 41 | Taking out old u/s knob/handle of drawer and front shutter of cabinet and S&F new aluminium anodised knob heavy duty of quality as per sample available |
| 42 | Taking out old u/s side of cabinet of table and S&F new side of cabinet made out of 18mm thick pre laminated particle board ext grade |
| 43 | Taking out old u/s shutter of cabinet of table and S&F new shutterr made out of 18mm thick pre laminated particle board ext grade with mild steel chromium plated piano continous hinges through out with MS screw of appropriate size. |
| 44 | Taking out old u/s top and S&F new top made out of 18mm thick pre laminated particle board ext grade with 4mm thick teak wood edge in alround the top. Shade of new top as approved by Engineer-in-charge. |
| 45 | M&L french polishing of complete table exposed to view except laminated portion all as specified and directed by Engr-in-Charge. |
| 46 | SIDE BOARD (FD-241) |
| 47 | Taking out old u/s top side board and S&F new top made out of board 18mm thick with pre laminated particle board ext gde approx size of top 1220x455mm.Shade of new top as approved by Engineer-in-charge. |
| 48 | Taking out old u/s drawer and S&F of new drawer made out of board 18mm thick pre laminated particle board ext grade on front of drawer on one side only will be provided. |
| 49 | Taking out old u.s back ply of side board and S&F of new back made out of ply wood 6mm thick both side commercial. |
| 50 | Taking out old u/s shutter complete set and S&F new shutter made out of 18mm thick pre laminated particle board ext grade. Shutter to be fixed with mild sheet chromium plated continuous piano hinge with screw steel or required size and qty and all as approved. |
| 51 | Taking out old u/s shelf cabinet and S&F new shell made out of 18mm thick pre laminated particle board ext grade. |
| 52 | Taking out old u/s side of side board and S&F new side made out of 18mm thick pre laminated particle board ext grade |
| 53 | Taking out old u/s knob/handle of shutter/front of drawer and S&F new knob aluminium anodised heavy duty of approved design and size as per sample available in furniture yard. |
| 54 | Taking out old u/s long bottom rail of trestle portion and S&F new bottom long rail made out of teak wood |
| 55 | Taking out old u/s long bottom rail and fixing only old short rail to be obtained from Srl NO 5.08 above |
| 56 | Taking out old u/s bottom plank of side board and S&F new bottom plank made of 18mm thick pre laminated particle board ext grade |
| 57 | S&F ply wood 4mm thick one side veneered (extg gde) on sides of side board, on front of drawer front of shutters to cover the existing u/s surface with head less nails as approved. |
| 58 | M&L polishing with spirit polish externally and internllay on all wooden surfaces exposed to direct view except laminated portion all as specified and dircted by Engr-in-charge |
| 59 | BED plywood top with out MNF (FD-246,247) |
| 60 | Removal of u/s long rail and S&F new long rail made out of 1st class hard wood all as per drg. |
| 61 | Removal of u/s stiffner under the ply top and S&F new stifiner made out of wood all as per drg |
| 62 | Removal of u/s head board carefully and S&F new head board made out wood frame covered with one side veneered ply 4mm thick on both sides of head board, including teak wood beading of size all as per drg |
| 63 | All as per item No 6.03 above but foot borard . |
| 64 | Removal of u/s ply wood top and S&F new top of BWR ISI marked ply wood 12mm thick ISI marked both sides commercial all as per drg (Note Ply top shall be 1980 mm longx900mm wide (single piece). |
| 65 | Material and labour for bracket made out of 1st class hard wood triangular type size of 40mmx 130mm x 180mm after taking down old/ damaged bracket and fixed with sutaible size of screw at meeting place of legs and long rails duly polished complete all as specified and as directed. |
| 66 | Polishing of complete bed hard throughout on surface exposed to diret view except of bed . |
| 67 | TABLE DINING FOR 6 PERS (FD-273,278) |
| 68 | Taking out u/s leg and S&F new leg made out of 1st class wood all as per specified in drg and as directed by Engr-in-Charge . |
| 69 | Taking out o/s old long rail and S&F new top long rail made out of 1st class wood all as per specified in drg and as directed by Engr-in-Charge |
| 70 | Taking out old u/s top short rail and S&F new top rail made out of 1st class wood all as per specified in drg and as directed by Engr-in-Charge |
| 71 | Taking out old u/s top table and S&F new top of table of size1500x900mm made out of 18 mm thick prelaminated particle board exterior grade with both side teak finish and all as per specified in drg and as directed by Engr-in-Charge |
| 72 | Material and labour for polishing for complete table exposed to view except laminated portion all as specified and directed by Engr-in-Charge |
| 73 | TABLE DINNING FOR 8 PERS (FD-273,278) |
| 74 | Taking out old u/s leg and replace with new leg made out of 1st class wood all as per specified in drg and as directed by Engr-in-Charge |
| 75 | Taking out old u/s long rail and S&F new top long made out of 1st class wood all as per specified in drg and directed by Engr-in-Charge |
| 76 | Taking out old u/s top short rail and S&F new top short rail made out of 1st class wood all as per specified in drg and directed by Engr-in-Charge |
| 77 | Taking out old u/s top table and S&F new top of table of size 1800x900mm made out of 18mm thick prelaminted particle board exterior grade with both side teak finish and all as per specified drg and as diected by Engr-in-Charge. |
| 78 | Material and labour for polishing for table exposed to view except laminated portion all as specified and directed by Engr-in-Charge |
| 79 | TABLE DRESSING GENTS WITH MIRROR (FD-230, 379) |
| 80 | Removing old unserviceable Drawer of Table Dressing Gents and S&F new Drawer complete as per drg of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-230 |
| 81 | Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new Looking mirror complete with frame teak wood duly fixed with clamp for hanging of table dressing gents complete all as specified and shown on drg and directed. |
| 82 | M&L French polish, 2 coats to new parts of table dressing gents replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-230 |
| 83 | TABLE CENTRE (FD-274,291) |
| 84 | Taking out u/s top of table and S&F new top table of size made out of prelaminated particle board exterior grade 18mm with both side teak finish including provn of 4mm thick teak wood edging all aroud to the table top and all as per specified in drg and as directed by Engr-in-Charge |
| 85 | Taking out old u/s leg and S&F new leg made out of 1st lass wood all as per dpecified in drg and as directed by Engr-in-Charge |
| 86 | All as per item No 10.02 above nut top rail long side |
| 87 | All as per item 10.02 above but top short rail short side |
| 88 | Replacement of u/s rubber rings with hard PVC toes as approved. Fixing shall be done as per drg |
| 89 | Cleaning all the exposed wooden /teak faced ply and wood throughly by using abrassive cloth emery and putty as reqd as per drade prectice and applying polish in a glossy finished shade as directed |
| 90 | PEG TABLE (FD-384/277/25/23/184) |
| 91 | Replacement of u/s legs with 1st class hard wood grade of required size as per drg. The fixing and finishing shall lbe done in accordance with standard workmanship and drg |
| 92 | Replacement of u/s top rail long side with 1st class hard wood grade-1 of reqd size as per drg. The fixing and fininshing shall be done in accordance with standard workmanship and drg. |
| 93 | All as per item No 11.02 above but top rail short side |
| 94 | Replacement of u/s rubber rings with hard rubber rings as approved. Fixing shall be done as per drg |
| 95 | All as per item No 11.04 Above but stiffner short side |
| 96 | Taking out u/s top of table and S&F new top of size made out of prelaminated particle board exterior grade 18mm with both side teak finish including provn of 6mm thick wood edging all aroud to the table top and all as per specified in drg and as directed by Engr-in-Charge |
| 97 | Cleaning all the exposed wooden surface throughly by using abrassive cloth emery and putty as reqd as per trade practice and applying polish in a glossy finished shade as directed |
| 98 | TEAPOY (FD-232,278,382) |
| 99 | Replacement of u/s table top with 18mm thick prelaminated particle baord exterior grade 1 type ll confirming to ISI specification of reqd size as per drg including provn of 6mm thick wood edging around the table top The fixing and finishing shall be done in accordance with standred workmanship and drg and directed |
| 100 | Replacement of u/s legs with 1st class hard wood grade -1 of required size as per drg. The fixing and finishing shall lbe done in accordance with standard workmanship and drg |
| 101 | All as per item No 12.01 above top long side |
| 102 | All as per item No 12.01 above but top rail short side |
| 103 | All a per item No 12.01 above but leg stirffner |
| 104 | Replacment of u/s rubber rings with hard rubber rings as approved. Fixing shall be done as per drg |
| 105 | Cleaning old/new wooden surfaces throughly by using abrassive cloth emery and putty as reqd finsh as per trade practice and apply good quality polish as aproved in all exposed wooden surfaces upto the glossy finish shade s directed by Engr-in-Charge |
| 106 | TABLE 900X600 WITHOUT DRAWER (FD-283) |
| 107 | Replacement of u/s table top with 18mm thick prelaminated particle baord exterior grade 1 type ll confirming to ISI specification of reqd size as per drg including kprovn of 6mm thick wood edging around the table top The fixing and finishing shall be done in accordance with standard workmanship and drg and directed |
| 108 | Replcacment of u/s legs with 1st class hard wood grade - 1 of required size as per drg. The fixing and finishing shall lbe done in accordance with standard workmanship and drg |
| 109 | All as per item No 13.02 above but top long side |
| 110 | All as per item No 13.02 above but rail short side |
| 111 | All as per item No 13.02 above but stiffner long side |
| 112 | All as per item No 13.02 above but stiffner short side |
| 113 | Replacment of u/s rubber rings with hard rubber rings as approed. Fixing shall be done as per drg |
| 114 | Cleaning old/new wooden surfaces throughly by using abrassive cloth emery and putty as reqd as per trade practice and by Engr-in-Charge |
| 115 | SOFA SET 4 SEATS (FD-373) |
| 116 | Replacement of old u/s/ unhygienic cushion of size 560x530mm with 100mm thick 32 density of Make sleep well / Kurlon cushion as approved by Engr-in-charge. The best quality tapestry and marking to be provided to the cushion upto the satisfaction of Engr-in-charge. The tapestry used in the cushion shall be of Make: Vimal / Bombay dyeing / De-D'cor. make of cushion & tapestry cloth and Stiching fixing and finishing shall be done with accordance with drg and specification. |
| 117 | Repair /replacemenr of u/s back rest wooden frame single with 1st class hard wood of required size as required as per drg . |
| 118 | Cleaning old /new wooden surfaces throughly by using abrassive cloth emery and putty as reqd as per trade practive and apply good quality polish as aproved in all exposed wooed surfaces upto the glossy finish shade as directed by Engr-in-Charge. |
| 119 | SOFA SET 5 SEATS (FD-373) |
| 120 | Replacement of old u/s/ unhygienic cushion of size 560x530mm with 100mm thick 32 density of Make sleep well / Kurlon cushion as approved by Engr-in-charge. The best quality tapestry and marking to be provided to the cushion upto the satisfaction of Engr-in-charge. The tapestry used in the cushion shall be of Make: Vimal / Bombay dyeing / De-D'cor. make of cushion & tapestry cloth and Stiching fixing and finishing shall be done with accordance with drg and specification. |
| 121 | Repair /replacemenr of u/s back rest wooden frame single with 1st class hard wood of required size as required as per drg . |
| 122 | Cleaning old /new wooden surfaces throughly by using abrassive cloth emery and putty as reqd as per trade practive and apply good quality polish as aproved in all exposed wooed surfaces upto the glossy finish shade as directed by Engr-in-Charge. |
| 123 | TABLE BED SIDE (FD-276) |
| 124 | Removing old unserviceable Top of Table Bed Side and S&F new Top made of 18mm thick prelaminated particle board of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-276 |
| 125 | All as per item No 16.01 here-in-before but for Sides. |
| 126 | All as per item No 16.01 here-in-before but for Shelf. |
| 127 | Removing old unserviceable Back Ply of Table Bed Side and S&F new Back Ply 6 mm thick of existing size, shape complete all as specified and shown on drg and directed. Refer drawing No. FD-276 |
| 128 | M&L French polish, 2 coats to new parts of table bed side replaced vide above items and 01 coat to remaining old surfaces complete all as specified and directed. Refer drawing No. FD-276 |
| 129 | TABLE DRESSING LADIES WITH MIRROR (FD-378/251) |
| 130 | Material and labour for mirror of table dressing ladies of size 1220 x 366 x 5mm thick, electro copper plated mirror with back of 6mm thick ply wood commercial, BWR grade duly polished after removing old/ damaged mirror complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378 |
| 131 | Material and labour for mirror frame of table dressing ladies of size 25 x 19 mm all around made out of Ist class hard wood duly polished after removing old/ damaged frame complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378. |
| 132 | Material and labour for wooden member back of dressing mirror (ladies) of size 45 x 40 x 1550mm made out of 1st class hard wood duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378. |
| 133 | Material and labour for top of table dressing ladies size of 380 x 900mm made out of 18mm thick pre-laminated particle board with one side teak finish and other side white, grade-1 with Ist class hard wood edging 6mm thick duly polished after removing old/ damaged top complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378. |
| 134 | Material and labour for sliding glass shutter mirror of table dressing ladies of size 270 x 300mm x 5mm thick after removing old/ damaged sliding glass shutter complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251&FD-378. |
| 135 | Material and labour for back made out of 12mm thick plywood, commercial, BWR grade size of 380 x 900mm duly polished after removing old/ damaged back complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251&FD-378. |
| 136 | Material and labour for Aluminium channel of size 12 x 22 x 550mm after removing old/ damaged channel complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378 |
| 137 | Material and labour for Aluminium channel of size of 12 x 22 x 380mm after removing old/ damaged channel complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378 |
| 138 | Material and labour for legs of mirror table dressing ladies of size 45 x 45x 150mm made out of Ist class hard wood after removing old/ damaged legs duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378. |
| 139 | Material and labour for side stiffener of table dressing ladies of size 40 x 25 x 380mm made out of 1st class hard wood after removing old/ damaged stiffener duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378. |
| 140 | Material and labour for front stiffener of table dressing ladies of size 40 x 25 x 900mm made out of 1st class hard wood after removing old/ damaged stiffener duly polished complete all as specified and as directed. Rest all as per drawing. Drg No. FD-251 & FD-378. |
| 141 | CHAIR DINING CUSHIONED Drg No FD/MAP II / 04 |
| 142 | Supply and fixing in replacement of unserviceable Front leg of Chair Dining MAP using 1st class seasoned hard wood including dismantling of unsv components/parts complete all as specified and directed and shown on drg as directed |
| 143 | All as per Ser item No. 18.01 here-in-before but Rear leg |
| 144 | All as per Ser item No. 18.01 here-in-before but side rail. |
| 145 | All as per Ser item No. 18.01 here-in-before but back stiffener. |
| 146 | All as per Ser item No. 18.01 here-in-before but stiffener 'H' type. |
| 147 | All as per Ser item No. 18.01 here-in-before but Foam cushion 75 mm thick and 32 density duly covered with tapestry cloth of approved quality. |
| 148 | Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood duly polished if support required for chair dining complete all as specified and as directed. |
| 149 | Polishing to chair dining cushioned MAP with french polish wooden portion exposed to direct vision except top ply wood after replacement of above components /parts complete all as specified and directed and shown on drawing |
| 150 | CHAIR EASY CUSHION (FD-358) |
| 151 | Supply and fixing in replacement of unserviceable Front leg of Chair Easy Cushion using 1st class seasoned hard wood including dismantling of unsv components/parts complete all as specified and directed and shown on drg as directed |
| 152 | All as per Ser item No. 19.01 here-in-before but Rear leg |
| 153 | All as per Ser item No. 19.01 here-in-before but side rail. |
| 154 | All as per Ser item No. 19.01 here-in-before but back stiffener. |
| 155 | All as per Ser item No. 19.01 here-in-before but Seat Foam cushion 75 mm thick and 32 density duly covered with tapestry cloth of approved quality. |
| 156 | All as per Ser item No. 19.01 here-in-before but Back Foam cushion 75 mm thick and 32 density duly covered with tapestry cloth of approved quality. |
| 157 | Material and labour for brackets of 25mm thick made to shape and screwed to top rails and legs made out of 1st class hard wood duly polished if support required for chair dining complete all as specified and as directed. |
| 158 | Polishing to chair easy cushion with french polish wooden portion exposed to direct vision except top ply wood after replacement of above components /parts complete all as specified and directed and shown on drawing Please Enable Macros to View BoQ information |
