|
| 1 | GI PIPE CHARPOY NEWAR INTO GI PIPE PLYTOP :- FD-220(M), 227 |
| 2 | Removing of old unserviceable plytop / newar from GI charpoy and supply & fixing two Nos stiffners made out of MS square pipe size 25mm x 25mm x 1.5mm conforming to IS-2062 of 1999 Grade 'A' (weight of pipe not less than 1.06 kg/mtr). The stiffners shall be welded to the frame of the GI charpoy at equal distance joining the long rail such that they lie parallel to short rails and perpendicular to the long rail. The stiffners shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 3 | Removing old unserviceable plywood from charpoy plytop and welding of old broken stiffners pipe and re-fixing plywood in charpoy complete all as specified and directed. |
| 4 | Removing of old unserviceable long rails having both threaded broken end and supply & fixing new long rail made out of GI tubing 32mm bore medium grade ISI marked including making threaded both ends and fixing as shown on drawing complete all as specified and directed. |
| 5 | Removing of old unserviceable short rails of GI charpoy having both threaded broken ends and supply & fixing new short rails of GI charpoy obtained from Srl Item No 7(c) above, including making threads at the both ends and fixing as shown on drawing complete all as specified and directed. |
| 6 | Removing of old unserviceable leg and supply & fixing new leg made out of short rail of GI charpoy obtanied from Srl item No. 7 (d) above, including welding of MS plate at the bottom of leg and making thread other end & fixing in position complete all as specified and shown on drawing. |
| 7 | Removing of old unserviceable GI elbow three way and supply & fixing of new GI elbow three way size 32mm bore with new ISI mark (weight not less than 420 gms each and re-assembling of GI Charpoy after replacement of broken elbow complete all as specified and directed. |
| 8 | Removing old unserviceable check nuts from long rail of GI charpoy and supply & fixing of new check nut of 32mm bore and 10mm wall thick, (Wt not less than gms each) ISI marked and fixing in the same in position complete all as specified and directed. |
| 9 | Supply & fixing new 12mm thick plywood in repairs ISI marked BWR Grade of approximate size 1980mm x 1050mm conforming to IS-303/1989 on top of GI pipe charpoy fixing with 10 Nos new nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed.(Note:- Each corner of plywood should be round shaped). |
| 10 | Material and labour for re-painting of mentioned below steel furnituire as per the following steps:-(a) Denting of bent surfaces with the help of hammer in best workmanship manner.(b) Removing old paint by scrubbing with sand paper 150 No thoroughly.(c) Applying one coat of metal primer. (Make Asian/Nerolac/Delux).(d) Applying metal putty to even surface.wait period 2-3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No and paper and spraying little amount of water simultaneously.(e) Wipe the surface with solt dry cloth and apply one coat of enamel paint of light shade as approved by GE. |
| 11 | Almirah large steel with shelves complete all as specified and directed. FD-1031/67 |
| 12 | Almirah small steel with shelves complete all as specified and directed. FD-1032/243 |
| 13 | Locker bed side steel complete all as specified and directed. FD-1029 |
| 14 | Almirah large steel with glazed door complete all as specified and directed. FD-104(M) |
| 15 | Rack adjustable stelel 6 tier complete all as specified and directed. FD/106/M |
| 16 | BED HARD STEEL (FD/E6/MAP/08(R) |
| 17 | Supply and fixing new 18mm thick both sides prelaminated particle board BWR exterior grade confirming to IS in replacement of UNSV 18mm thick both sides pre-laminated particle board of BWR exterior grade confirming to relevant IS shade /colour as approved with PVC edging screwed to MS strip of head board all as per drawing |
| 18 | Supply and fixing new 18mm thick both sides prelaminated particle board BWR exterior grade confirming to IS in replacement of UNSV 18mm thick both sides pre-laminated particle board of BWR exterior grade confirming to relevant IS shade /colour as approved with PVC edging screwed to MS strip of foot board all as per drawing |
| 19 | Supply and fixing in replacement of 20 mm x45mm of 18 gauge MS Strip with new of same size & thickness (including necessaary Welding) all as per drawing complete all as specified and directed. |
| 20 | M & L for fixing (only) of long rails (including necessary welding /Nut& bolts) to head board and foot board complete all as specified and directed. |
| 21 | Supply and fixing in replacement of old unserviceable stiffener with new of size 1974x824 mm (including welding ) made of 25 mm x25mm square MS pipe (18 gauge) all as per drawing complete all as specified and directed. |
| 22 | Supply and fixing 12 mm tick plywood BWR grade type A ,confirming to IS-303 of 1975 (ISI marked) in replacement of old unserviceable 12 mm thick plywood BWR grade type 'A' confirmimg to IS-303 of 1975 (ISI marked) all s per drawing complete all as specified and directed. |
| 23 | Supply and fixing in replacement of old unserviceable hard rubber shoes with new of size 38mmx38mm (Inner size) all as per drawing) complete all as specified and directed. |
| 24 | M & L for painting to frame of bed hard steel with two coats of synthetic enamel black paints including welding where required and preparation of surfaces all as directed |
| 25 | CHAIR DINING FD-273,279 |
| 26 | Removing of old unserviceable rear leg of chair dining and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 27 | Removing of old unserviceable front leg of chair dining and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 28 | Removing of old unserviceable front rail/side rail/ back rail of chair dining and supply and fixing with new front rail/side rail/ back rail of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 29 | Removing of unserviceable bottom stiffener of chair dining and supplying and fixing with new bottom stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 30 | Removing of unserviceable back rest of chair dining and supplying and fixing with new back rest of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 31 | Removing of unserviceable cane stiffener of chair dining and supplying and fixing with new cane stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 32 | Removing of old cane from chair dining (bottom) and re-canning with new best quality plastic cane 2mm wide white colour cane in godrej pattern complete all as specified & directed. |
| 33 | M&L for preparation of old/new chair dining and polishing of high gloss french polish of chair dining complete all as specified & directed. |
| 34 | CHAIR WRITING FD-202/250/280 |
| 35 | Removing of old unserviceable rear leg of chair writing and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 36 | Removing of old unserviceable arm rest of chair writing and supply and fixing with new arm rest of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 37 | Removing of old unserviceable front leg of chair writing and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 38 | Removing of old unserviceable front rail/side rail/ back rail of chair writing and supply and fixing with new front rail/side rail/ back rail of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 39 | Removing of unserviceable bottom stiffener of chair writing and supplying and fixing with new stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 40 | Removing of unserviceable cane stiffener of chair writing and supplying and fixing with new cane stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 41 | Removing of old cane from chair writing (bottom) and re-canning with new best quality plastic cane 2mm wide white colour cane in godrej pattern complete all as specified & directed. |
| 42 | M&L for preparation of old/new chair writing and polishing of high gloss french polish of chair writing complete all as specified & directed. |
| 43 | CHAIR EASY FD-201,229,17(M) |
| 44 | Removing of old unserviceable rear leg of chair easy and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 45 | Removing of old unserviceable front leg of chair easy and supply and fixing with new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 46 | Removing of old unserviceable front batten of chair easy and supply and fixing with new front batten of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 47 | Removing of old unserviceable back batten of chair easy and supplying and fixing with new batten of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 48 | Removing of old unserviceable arm rest of chair easy and supplying and fixing with new arm rest of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 49 | Removing of old unserviceable front & back rail of seat/back of chair easy and supplying and fixing with new front & back rail of seat/back of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 50 | Removing of old unserviceable side rail of seat/back of chair easy and supplying and fixing with new side rail of seat/back of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 51 | Removing of old cane from chair easy (bottom & back) and re-canning with new best quality plastic cane 2mm wide white colour cane in godrej pattern complete all as specified & directed. |
| 52 | M&L for preparation of old/new chair easy and polishing of high gloss french polish of chair dining complete all as specified & directed. |
| 53 | TABLE CENTRE 900x450 mm FD-235/274 |
| 54 | Removing of old unserviceable long rails of Table centre 900mmx450mm and S& F new Long rail made out 1st class teak wood complete all as specified and directed. |
| 55 | Removing of old unserviceable shortrails of Table centre 900mmx450mm and S& F new short rail made out 1st class teak wood complete all as specified and directed. |
| 56 | Removing of old unserviceable legs of Table centre 900mmx450mm and S& F new legs made out 1st class teak wood complete all as specified and directed. |
| 57 | Re-tighting the Joints of Frame of table centre 900mmx450mm duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed. |
| 58 | Removing of old unserviceable top of Table centre 900mmx450mm and S& F new Top made out Prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'Top' duly french polished complete all as specified and directed. |
| 59 | PEG TABLE FD-227/277 |
| 60 | Removing of old unserviceable long rails of peg table and S& F new Long rail made out 1st class teak wood complete all as specified and directed. |
| 61 | Removing of old unserviceable shortrails of peg table and S& F new short rail made out 1st class teak wood complete all as specified and directed. |
| 62 | Removing of old unserviceable legs of peg table and S& F new legs made out 1st class teak wood complete all as specified and directed. |
| 63 | Re-tighting the Joints of Frame of peg table duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed. |
| 64 | Removing of old unserviceable top of peg table and S& F new Top made out Prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'Top' duly french polished complete all as specified and directed. |
| 65 | TABLE 900 x 600 WITH DRAWERS FD-284 |
| 66 | Removing of old unserviceable long rails of table 900mm x 600mm with drawer and supplying and fixing new long rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 67 | Removing of old unserviceable short rails of table 900mm x 600mm with drawer and supplying and fixing new short rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 68 | Removing of old unserviceable legs of table 900mm x 600mm with drawer and supplying and fixing new legsl made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 69 | Re-tighting the joints of frame of table 900mm x 600mm with drawer duly provided new boopins pins as per requirement and making tight all lose components complete all as specified & directed and as shown in drg. |
| 70 | Removing of old unserviceable box including drawers of table 900x600 and supplying and fixing new drawers shall be of 18 mm thick prelaminated prticle board except back side and back shall be made of 6mm thick commercial plywood complete all as specified & directed and as shown in drg |
| 71 | Removing of old unserviceable top of table 900mm x 600mm with drawer and supplying and fixing new top made out of prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'top' duly french polished complete all as specified & directed and as shown in drg. |
| 72 | TABLE 900 x 600 WITHOUT DRAWERS FD-284 |
| 73 | Removing of old unserviceable long rails of table 900mm x 600mm without drawer and supplying and fixing new long rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 74 | Removing of old unserviceable short rails of table 900mm x 600mm without drawer and supplying and fixing new short rail made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 75 | Removing of old unserviceable legs of table 900mm x 600mm without drawer and supplying and fixing new legsl made out of first class teak wood complete all as specified & directed and as shown in drg. |
| 76 | Re-tighting the joints of frame of table 900mm x 600mm without drawer duly provided new ba,boopins as per requirement and making tight all lose components complete all as specified & directed and as shown in drg. |
| 77 | Removing of old unserviceable top of table 900mm x 600mm without drawer and supplying and fixing new top made out of prelaminated particle board exterior grade 18mm thick 4mm thick teak wood beading around of 'top' duly french polished complete all as specified & directed and as shown in drg. |
| 78 | TABLE DINING 4/6 PERSONS FD-273,376,MAP-II/03, DB-3995 |
| 79 | Removing of old unserviceable leg of table dining 4/6 persons and supply and fixing with new legs of table dining 4/6 persons of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 80 | Removing of old unserviceable long rails of table dining 4/6 persons and supply and fixing with new long rails table dining 4/6 persons of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 81 | Removing of old unserviceable short rails of table dining 4/6 persons and supply and fixing with new short rails of table dining 4/6 persons of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 82 | Removing of old unserviceable top of table dining 4/6 persons and supplying and fixing with new pre-laminated particle board 19mm thick light shade as approved by with 6mm thick teak wood beading alround the edges of partical board complete all as specified & directed and as shown in drg. |
| 83 | M&L for preparation of old/new table dining 4/6 persons and polishing of high gloss french polish of table dining4/6 persons complete all as specified & directed. |
| 84 | TABLE WRITING FD-275/249 |
| 85 | Removing of old unserviceable leg of table writing and supply and fixing with new legs of table writing of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 86 | Removing of old unserviceable long rail of table writing and supply and fixing with new long rail of table writing of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 87 | Removing of old unserviceable short rail of table writing and supply and fixing with new short rail of table writing of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 88 | Removing of old unserviceable bottom stiffner of table wiriting and supplying and fixing with new bottom stiffeners of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg. |
| 89 | Removing of old unserviceable box including drawers of table writing and supplying and fixing new drawers, drawers to be run on telescopic channels and bottom cupboard fixed with magnetic chather and piano type hinges (box shall be made of 18mm thick prelaminted particle board except back side eand back shall be made of 6mm thick commercial plywood complete all as specified & directed and as shown in drg. |
| 90 | Removing of old unserviceable top of table writing and and supplying and fixing new prelaminated board 19mm thick light shade as approved by GE with 6mm thick teak wood beading alround the edges of partical board complete all as specified & directed and as shown in drg. |
| 91 | M&L for preparation of old/new table writing and polishing of high gloss french polish of chair dining complete all as specified & directed. |
| 92 | LOCKER BED SIDE STEEL FD-1029 |
| 93 | Removing of old unserviceable hasp and staple and supply & fixing of new CP Hasp and Staple 75mm long as per given in drawing and site requirement complete all as specified and directed. |
| 94 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 95 | Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 96 | Removing of old unserviceable leg of size 600mmx80mmx100mm and supply & fixing of new leg of size 600mmx80mmx100mm made out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 97 | Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per given in drawing and site requirement complete all as specified and directed. |
| 98 | Charpoy Hard Top (FD/MAP-II/01) |
| 99 | Supply and fixing of stiffener (including welding) made of 25 mm square MS pipe (16 gauge) in replacement of old unserviceable stiffener all as per drawing and as directed. |
| 100 | Supply and fixing of 12 mm thick plywood BWR grade type 'A' of size 1930x850mm confirming to IS -303 of 1975 (ISI marked) in replacement of old unserviceable plywood all as per drawing. |
| 101 | Supply and fixing of thick hard rubber shoes of size 32 mm square (Inner size) in replacement of unserviceable hard rubber shoe all as per drawing. |
| 102 | M&L for painting of frame of charpoy with hard top with two coats of synthetic enamel black paints including welding where required and preparation of surfaces |
| 103 | CHAIR VARANDAH FD-1031,359 |
| 104 | Removing of old cane from chair varandah steel (bottom and back) and re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed. |
| 105 | M&L for painting to frame of chair varandah with white synthetic paint after preparation of surface (after removing the old cane) complete all as specified and directed. |
| 106 | M&L for gas welding to frame of chair varandah including preparation of surface and removing the unwanted welding spot complete all as specified and directed. |
| 107 | S&F in replacement of unserviceable portion of frame of chair varandah with 20mm conduit pipe of wall thickness 1.60mm duly gas welding complete all as specified and directed. |
| 108 | S&F in replacement of hard rubber shoe to the leg of chair varandah of standerd approved quality complete all as specified and directed. |
| 109 | Material and labour for preparing of old/new polished wood based furniture articles as per the following steps:-Step 1 Sanding:- The wood components shall be rubbed with sand paper No 120 along the grains to remove any dust/ wax/unwanted stains from the surface, the sanding will be repeated with sand paper between 180-220 grit in order to achieve the smooth surface and the wood will be wiped clean with soft clean cloth complete all as specified and directed. Steps 2 : Staining : Any cracks or holes shall be filled with wood filler of good quality. After the wood filler has dried completly sanding with a stain of approved shade will be then applied to the prepared surface with the help of a soft malmal cloth or brush along the grain'. two to three coats of staining will be done letting the stain dry completly between each coats and sanding every time very fine grit sand paper (220-320). NOTE: Excess stain should be wiped off before drying and getting absorbed in wood. Step 3 Polishing : Wood will be finished with a good quality french polish (mixture of shellac grains and methylated spirit in ratio 1:10) two to three coats shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required, Polish shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed. |
| 110 | Table dining 04/06 person complete all as specified and directed. FD-273, FD-/MAP/-II/03 |
| 111 | Table dining 8 person complete all as specified and directed. FD-273/239 |
| 112 | Teapoy complete all as specified and directed. FD-34 |
| 113 | Table writing complete all as specified and directed. FD-275/249 |
| 114 | Table 3'x2' with drawer complete all as specified and directed. FD-283/224 |
| 115 | Table 3'x2' without drawer complete all as specified and directed. FD-284/223 |
| 116 | Table dressing ladies with mirror complete all as specified and directed. FD-251 |
| 117 | Sofa 3 piece 5 seater complete all as specified and directed. FD-281/258 |
| 118 | Peg Table complete all as specified and directed. FD-277 |
| 119 | Side board complete all as specified and directed. FD-272 |
| 120 | Table center complete all as specified and directed. FD-277 |
| 121 | Hat stand with mirror complete all as specified and directed. FD-361/233 |
| 122 | Sofa Set Four Seater complete all as specified and directed. FD-373 |
| 123 | Table complete all as specified and directed. 3'x3' FD-88(M)/291 |
| 124 | Bed Hard complete all as specified and directed.FD-245, FD-21(M) |
| 125 | Table office officer wooden complete all as specified and directed. DB-4149, WDF-32 |
| 126 | Almirah Large Wooden complete all as specified and directed. F-21A, F-214, DB-4116 |
| 127 | Table Bed Side complete all as specified and directed. FD-210//243/276 |
| 128 | SOFA SET FD-373/FD-281 |
| 129 | Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 3 piece of 5 seater set and supply and fixing new 100mm thick & 50 density of (size 21\\" x 21\\" 4\\") for seat cushion, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. |
| 130 | All as per item 18.10 above but sofa single chair of 5 seater complete all as specified and directed. |
| 131 | M&L for preparation of old/new sofa set 3 piece of 5 seater set and polishing of high gloss french polish of sofa set 3 piece of 5 seater set complete all as specified & directed. |
| 132 | M&L for preparation of old/new sofa single chair of 5 seater set and polishing of high gloss french polish of sofa single chair of 5 seater set complete all as specified & directed. |
| 133 | TABLE OFFICE STEEL (CLERK/STEEL) FD-1003/FD-1004 |
| 134 | Removing of old unserviceable legs made of MS conduit/square pipe and supply & fixing new legs made out of MS conduit/square/pipe of size 25mm dia and 1.6mm wall thickness complete all as specified and directed. |
| 135 | Removing of old unserviceable drawers with telescopic channel and lock 6 lever complete and supply & fixing new MS drawers made out of 1mm thick MS sheet with lock of 6 lever, drawer shall run on telescopic channel for which new telescopic channel of appropriate size shall be fixed in the table complete all as specified and directed. |
| 136 | Removing of old unserviceable drawers cabinet shutter and supply & fixing new MS cabinet shutter, shutter made out of 1mm thick MS sheet with groove duly covered with pvc to pull the shutter out complete all as specified and directed |
| 137 | Removing of old unserviceable Pre-laminated particle board top of clerk table and supply & fixing new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading around the edges of partical board complete all as specified and directed. |
| 138 | Material and labour for welding to broken joints of frame of table complete all as specified and directed, |
| 139 | Supply & fix in repair of hard rubber shoe to the leg of table of standard approved quality complete all as specified and directed. |
| 140 | BOOK CASE STEEL (GLASS DOOR) FD-1028, FD-237, WDF-2, FD-90(M) |
| 141 | Removing unserviceable MS channel and supply and fixing new MS channel complete including necessary welding and roller all as per drawing and as directed. |
| 142 | Removing unserviceable 3 mm thick plain glass with cleat stopper and S&F new 3 mm plain glass with iron cleat stopper all as per drawing and as directed |
| 143 | Removing unserviceable sliding shutter and supply and fixing new sliding shutter of 1 mm thick MS sheet including glass , lock and two handles all as per drawing as directed. |
| 144 | Removing unserviceable locks and supply and fixing new lock with duplicate keys as per drawing and as directed |
| 145 | Removing unserviceable handles and supply and fix new handles of 100 mm all as per drawing and as directed |
| 146 | Removing unserviceable shelves and supply and fix new shelves of 1 mm thick MS sheet with existing matching colour all as per drawing and as directed |
| 147 | SOFA SET FIVE SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12 |
| 148 | Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 5 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. |
| 149 | M&L for preparation of old/new sofa single chair of 5 seater set and polishing of high gloss melamine polish of sofa single chair of 5 seater set complete all as specified & directed. |
| 150 | SOFA SET FOUR SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12 |
| 151 | Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 4 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. |
| 152 | M&L for preparation of old/new sofa single chair of 4 seater set and polishing of high gloss french polish of sofa single chair of 4 seater set complete all as specified & directed. |
| 153 | TABLE BED SIDE FD/E-6/MAP/15® |
| 154 | Removing Old unserviceable top 18 mm thick prelaminated particles board exterior grade and supply & fixing new top including PVC beading all round as per drawing and directed- |
| 155 | Removing old unserviceable sides 18 mm thick prelaminated particle board exterior grade and supply & fixing new sides including PVC beading all round as per drawing and all as directed |
| 156 | Removing old unserviceable top back 18 mm thick prelaminated particle board exterior grade and supply & fixing new top back including PVC beading all round as per drawing and all as directed |
| 157 | Removing old unserviceable drawers and supply & fixing new drawers (including necessary T/W runner ) as per drawing all as directed . |
| 158 | Removing old unserviceable back 6 mm thick plywood and supply & fixing new back 6 mm thick BWR plywood as per drawing and all as directed. |
| 159 | Removing old unserviceable hard rubber shoes of table bed side and supply & fixing in replacement of hard rubber shoes of table bed side all as per drg and as directed. |
| 160 | M & L for painting of frame of table bed side with two coats of synthetic enamel black paints including welding where required and preparation of surfaces all as directed. |
| 161 | CHAIR DINING CUSHIONED (MAP) FD/MAP/I/04 |
| 162 | Removing of old unserviceableb cushion seat of chair dining (MAP) and supply and fixing new cushioned seat of chair dining (MAP) cushioned seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75mm x 75mm x 25mm teak wood stoppers, stoppers to be fixed at four corners of main frame of chair complete all as specified & directed and as shown in drg.Make of foam : Feater foam / Sleepwell / Kurlon. |
| 163 | M&L for preparation of old/new chair dining cushioned (MAP) and polishing of high gloss french polish of chair dining cushioned (MAP) complete all as specified & directed. |
| 164 | TABLE DINING ORs ALUMINIUM TOP FD-165M |
| 165 | Removing of old unserviceable plywood, top of table dining ORs and supplying and fixing new 18mm thick commercial plywood top and covered with 1mm thick aluminium sheet complete all as specified & directed and as shown in drg. |
| 166 | M&L for preparation of old/new table dining ORs aluminium top and polishing of high gloss melamine polish of table dining ORs complete all as specified & directed. |
| 167 | TABLE COMPUTER FD/E6/MAP/03, TP |
| 168 | Removing Old unserviceable top 18 mm thick prelaminated particles board exterior grade and supply & fixing new top including PVC beading all round as per drawing and directed- |
| 169 | Removing old unserviceable sides 18 mm thick prelaminated particle board exterior grade and supply & fixing new sides including PVC beading all round as per drawing and all as directed |
| 170 | Removing old unserviceable bottom shelf 18 mm thick prelaminated particle board exterior grade and supply & fixing new bottom shelf including PVC beading all round as per drawing and all as directed |
| 171 | Removing old unserviceablepull out tray 18 mm thick prelaminated particle board exterior grade ,S&F new pull out tray including PVC beading all round & telescopic channel as per drawing and all as directed. |
| 172 | Removing old unserviceable drawer 18 mm thick prelaminated particles board exterior grade and supply & fixing new drawer including PVC beading all round and telescopic channel as per drawing and all as directed . |
| 173 | Removing old unserviceable key board tray 18 mm thick prelaminated particle board exterior grade and S&F new key board tray including PVC beading all roun telescopic channel as per drawing and all as directed. |
| 174 | Removing old unserviceable 25x50 mm rectangular PVC leg cover and supply & fix new PVC cover made to shape as per drawing and all as directed. |
| 175 | Removing old unserviceable nylon buffers /screwed base buffers and S&F new nylon buffers as per drawing and all as directed. |
| 176 | ALMIRAH SMALL STEEL WITH SHELVES FD-1032 |
| 177 | Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 178 | Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 179 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 180 | Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed |
| 181 | Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 182 | Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed |
| 183 | Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per give in drawing and site requirement complete all as specified and directed. |
| 184 | Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed. |
| 185 | ALMIRAH LARGE STEEL WITH SHELVES FD-67(M), FD-1031(M), DB-4049:- |
| 186 | Removing of old unserviceable MS clamps and supply & fixing of new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 187 | Removing of old unserviceable lock 6 lever and supply & fixing of new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 188 | Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 189 | Removing of old unserviceable three way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 190 | Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 191 | Removing of old unserviceable Base channel of size 485x80x100mm or leg and supply & fixing of new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed. |
| 192 | Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made to shape as per given in drawing and site requirement complete all as specified and directed. |
| 193 | Removing of old unserviceable MS Butt hinges 75mm and supply & fixing of new MS Butt hinges 75mm with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. |
| 194 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 97,883.00] Please Enable Macros to View BoQ information |
