|
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old asbestos cement sheets complete all as specified and as directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws incl dismantling of old PGI sheets complete all as specified and as directed. |
| 3 | M&L for 4 mm thick Non Asbestos , fibre cement building board of size 595x595 mm size in ceiling fixed or laid / inserted to timber / GI/Aluminium framework with screws (Note : GI frame work will be measured and paid for seperately) incl dismantling of old wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.(Note : GI frame work will be measured and paid for seperately) |
| 4 | M&L GI powder coated snap grid framework for false ceiling comprising of the following section for making partion of 600 x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32 mm x 15 mm x0.30 mm, cross tee shall be 32 mm x 15 mm x0.30 mm thick with black lining in mid portion and wall angle shall be 24 mmx24 mm x0.30 mm thick complete all as specified and as directed. |
| 5 | M&L for coloured Glazed ceramic tiles in vertical surfaces 450x300 x7mm / 600x300 x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 incl dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed |
| 6 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed |
| 7 | M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, including 15mm thick screed bed of cement mortar 1:6 incl 25mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished rough to receive floor/screed incl demolition of cement concrete floor 40mm thick complete all as specified and directed |
| 8 | M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc, including 15mm thick screed bed of cement mortar 1:6 incl roughening surface of old concrete/terrazo floor by peecking sweeping clean and washing down with water to remove dust etc complete all as specified and directed |
| 9 | M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed |
| 10 | M&L for providing 40mm thick cement concrete 1:2:4 type B1 (using 20mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement incl demolition of cement concrete complete all as specified and directed |
| 11 | S&F 3mm thick and 38mm wide glass dividing strips as in floors inserted in position, conform to design complete all as specified and directed |
| 12 | M&L Black granite (of any type) work (table rubbed and polished) 20 mm thick as in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 13 | M&L for machine cut Kota stone slab 18-20 mm thick as in floor/ treads of steps laid over and including 15mm thick screed in CM 1:6, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete incl demolition of cement concrete 40 mm thick as in floor complete all as specified |
| 14 | M&L for machine cut Kota stone slab 18-20mm thick as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10mm thick rendering in cement mortar 1:4, set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing incl taking down cement plaster on brick or concrete surfaces complete all as specified and directed |
| 15 | M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete incl demolition of brick work built in cement mortar all as specified |
| 16 | M&L for half brick thick brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 incl demoltion of brick work in cement mortar complete all as specified |
| 17 | M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified |
| 18 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty on walls complete all as specified and directed |
| 19 | M&L for 10mm thick plaster in ceiling of CM 1:3 on brick walls finished even and smooth without using extra cement incl taking down cement plaster from ceiling including scrubbing down with water etc complete all as specified |
| 20 | M&L for prepration of new plastered surface and applying three coat of white wash on ceiling complete all as specified |
| 21 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 22 | M&L for 15mm thick plaster in CM 1:4 on brick or concrete surface finished even and smooth without using extra cement over average 20 mm thick dubbing out on irregular face of brick or concrete surface in CM 1:4 incl taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 23 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 24 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone agg) as in slab and shelves supported on walls incl demolition of reinforeced cement concrete of any description and in any position all as specified and directed |
| 25 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 26 | M&L form work to soffits of suspended slab such as roof slab and similar work n. exc 200mm thick (horizental or sloping) rough finished flat surface complete all as specified and as directed. |
| 27 | M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and rough to receive tile etc incl demolition of cement concrete 75mm thick as in plinth protection/path complete all as specified and directed |
| 28 | M&L for rubber moulded chequered cement concrete tiles of size 30cm X 30cm X 20mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over 75mm thick PCC 1:4:8 type D2 incl demolition of 100mm thick PCC complete all as specified and directed |
| 29 | S&F for 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 15mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and as directed. |
| 30 | Refixing only 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed. |
| 31 | S&F for 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor incl taking up or down 20mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting in wall/floor complete all as specified and as directed. |
| 32 | Refixing only 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed. |
| 33 | S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified |
| 34 | S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified |
| 35 | S&F in repair 15mm Stop valve angle cock fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 36 | S&F in repair chromium plated brass shower rose 125mm size with swivel joint and shower arm complete all as specified |
| 37 | S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified. |
| 38 | S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified. |
| 39 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed. |
| 40 | S&F in repair 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastnercomplete all as specified and as directed. |
| 41 | S&F in repair rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed. |
| 42 | S&F in repair 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 43 | S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified |
| 44 | S&F in repair 20mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and as directed. |
| 45 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed. |
| 46 | S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32/40 mm dia, complete all as specified and directed |
| 47 | S&F 140mm PTMT grating round hole/without hole (minimum weight 50 gms) over Rain Water Pipe/nahani trap with cement slurry complete all as specified and as directed. |
| 48 | S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 49 | S&F in repair 110mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 110mm dia, jointed with approved adhesive complete all as specified and directed |
| 50 | S&F in repair PVC (SWR) bend 110mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 51 | S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 52 | S&F in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal with oval access door 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 53 | S&F in repair PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 54 | S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as specified and as directed. |
| 55 | S&F stack clamp out of 50mm x 5mm flat iron and 16mm dia round iron stays incl bolts and nuts and securing ends of stays to wall and roof for 75mm dia bore pipe complete all as specified and directed. |
| 56 | S&F stack clamp out of 50mm x 5mm flat iron and 16mm dia round iron stays incl bolts and nuts and securing ends of stays to wall and roof for 100mm dia bore pipe complete all as specified and directed |
| 57 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 58 | S&F in repair 20 mm dia brass CP tubular towel rail 'D' type 600mm long complete all as specified and as directed. |
| 59 | S&F in repair soap dish, brass, chromium plated of size 100mmX100mmX60mm fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed |
| 60 | Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed |
| 61 | Taking down shutter of any description n. exc 1 Sqm each complete all as specified and directed |
| 62 | Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed |
| 63 | S&F of flat iron bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fast, wall ties, hooks for hanging fans and other similar small steel article conforming to Fe – 290 Gde E - 165 complete all as specified and directed |
| 64 | M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in hold fast blocks including all form work complete all as specified and as directed |
| 65 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and as directed. |
| 66 | S&F 35mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified |
| 67 | M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified |
| 68 | S&F mild steel framed work such as grills, gratings etc designed with ends of bars shouldered and/or rivited or forged into spikes conforming to Fe - 290 grade E-165 complete all as specified and as directed. |
| 69 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces on steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed. |
| 70 | S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed. |
| 71 | S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed. |
| 72 | S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed. |
| 73 | S&F 75mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed. |
| 74 | S&F 125mm size mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed. |
| 75 | S&F 100mm size mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed. |
| 76 | S&F 250 mm Aluminium sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 77 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 78 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and as directed. |
| 79 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed |
| 80 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing |
| 81 | S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 82 | S&F extruded aluminium alloy handle of size 150mm, fabricated type, anodised complete all as specified and as directed. |
| 83 | S&F stainless steel butt hinges 100mm size complete all as specified and as directed. |
| 84 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed |
| 85 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and directed |
| 86 | S&F 3mm thick figured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm each pane complete all as specified and as directed. |
| 87 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed |
| 88 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed |
| 89 | S&F in repair 18/19mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screwsas in cupboard shutters and shelves all as specified and as directed |
| 90 | S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and as directed |
| 91 | S&F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and as directed. |
| 92 | S&F in repair 25mm dia drapery rod fancy powder coated fixed to wall with bracket and knobs complete all as specified and as directed. |
| 93 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole incl demoltion of cement concrete as in drain etc complete all as specified and directed |
| 94 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed |
| 95 | Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiselling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance complete all as specified and as directed. |
| 96 | M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof padding finish surface even and smooth without using extra cement including mixed with water proofing compound @ 3% by wt of cement incl demolition of PCC in any description complete all as specified and directed (Note : Water proofing compound will be measured and paid separately) |
| 97 | M&L for rendering 10 mm thick in cm 1:4 in horizontal / vertical surface of brick or concrete surfaces using water proofing liquid compound and finishing surfaces even & fair without using extra cement. complete all as specified and directed. Note: water proofing liquid will be measured and paid separately. |
| 98 | Material & labour for provision of water proofing treatment by using APP torch on mineral/plain finished membrane over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq m on clean and dry surface and then providing APP membrane having non woven. polyester film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps respectably complete all as per manufacturers compound complete all as specified and directed. |
| 99 | Supply only liquid integral water proofing admixture of make pidilite or its equivalent complete all as directed. |
| 100 | M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor using liquid integral WPC @ 200 ML/50Kg of cement (WPC shall be measured and paid separately.) complete all as specified and directed |
| 101 | Material & labour for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished ven & smooth without using extra cement complete all specified and directed |
| 102 | M&L PCC 1:5:10 type E-2 using 40 mm graded aggregates as in sunken filling and mass concrete incl demolition of cement concrete complete all as specified and as directed. |
| 103 | M & L for two coats of brush bond liquid compound of make fosroc or its equvalent water proofing coating over plastered surfaces of sunken portion (Fosroc chemical Ltd) complete all as specified and as directed. |
| 104 | Disconnectiong existing tanks of capacity exc 250 & not exc 500 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc and writing the date as \\"TANK CLEANED ON 10 DEC 2024\\" white or black thick synthetic enamel paint complete all as specified and directed |
| 105 | Disconnectiong existing tanks of capacity exc 500 & not exc 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all the scale and dirt, etc from tank and from months of circulating pipes etc and writing the date as \\"TANK CLEANED ON 10 DEC 2024\\" white or black thick synthetic enamel paint complete all as specified and directed |
| 106 | Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed |
| 107 | S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000ltr hoisted and fixed in position complete all as specified and directed |
| 108 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 45,465.00] Please Enable Macros to View BoQ information |
