|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (I) R&D CHANDIPUR Name of Work: REPAIR/REPLACEMENT OF DAMAGE PARTS AND PAINTING TO VARIOUS STEEL FURNITURE AT CHANDIPUR AND BALASORE Contract No: GE(I)R&D/BLS/ 2026-27 Bidder Name : SCHEDULE 'A' (BOQ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Work / Item Item Code / Make Number or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE (including all Taxes as specified in tender Documents) In Figures To be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | NOTE (Applicable for all items) :-(The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.CHARPOY GI PIPE WITH 12 MM PLYTOP (FD-220) : - M&L for carrying out repair and replacement of the following parts of charpy GI pipe with 12mm plytop, complete all as specified shown on drg after removing the old broken parts. |
| 3 | S&F of new 12mm thick commercial plywood 1980x 900mm BWR grade ISI marked (Make: national/kitply/green ply) alongwith MS round headed nut & bolts with whasher 75mm long and all as directed by Engr-in-Charge. |
| 4 | Dismentling and reassembling frame of charpoy GI pipe plytop and providing extra threads and welding sthe joints as required and directed by Engr-in-Charge. |
| 5 | Removing the existing u/s borken long rails of charpoy GI pipe and S&F new long rail made out of GI tubing 32 mm dia 1980 mm long (Medium grade ISI marked) make approved by GE all as specified and shown drg. |
| 6 | Making out short rails from broken long rails obtaian ser items No.01.03 above and fixing to the charpoy GI pipe complete all as specified and shown on drg including removing existing broken/u/s short rails. |
| 7 | Making out legs for charpoy GI pipe from broken GI pipe obtaian ser items No. 01.04 above and fixing to the charpoy GI pipe complete all as specified and shown on drg including removing existing broken/u/s legs. |
| 8 | S&F of new GI check nut of size dia 32mm and 5mm thick ISI marked approved by GE as required size and directed by Engr-in-Charge. |
| 9 | S&F of new GI elbow 3 way of size dia 32mm after dismantling/taking down old GI elbow of ISI marked approved by GE as required size and directed by Engr-in-Charge. |
| 10 | S&F of new MS flat iron stiffner of size 40x5 mm end length 900 mm with a coat of enamel paint black and all as directed by Engr-in-Charge. |
| 11 | S&F wooden plug as per required size and shape |
| 12 | FORM WITHOUT BACK {FD-77(M)}: - M&L for carrying out repair and replacement of the following parts of form without back all as shown on drg and as directed by Engr-in-Charge. |
| 13 | Removing the existing userviceable broken seat plank and supply & fix new 2nd class hard wood (Bijasal/Hollock) seat plank of size 255x1525mm thick fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glosy fensh of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge. |
| 14 | S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length as specified and directed by Engr-in-Charge. |
| 15 | All as per item No.2.02 here-in-before but for stiffner |
| 16 | S&F of rubber shoe for leg |
| 17 | Point welding as required |
| 18 | Preparing of steel surface of form without back and applying one coat of synthetic enamel paint of required colour all as specified and directed. |
| 19 | RACK ADJUSTABLE STEEL 6 SHELVES/8 SHELVES/9 SHELVES {FD-106(M} |
| 20 | S&F shelves made out of 1.25mm thick PBI sheet of size 305X915 mm |
| 21 | Point welding as required |
| 22 | Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface . |
| 23 | TABLE OFFICE OFFICERS STEEL {FD-84(M)/FD-1003} : - M&L for carrying out repair and replacement of the following parts of table office officers steel all as shown on drg and as directed by Engr-in-Charge. |
| 24 | S&F in replacement of table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge. |
| 25 | S&F of drawer of table made out of 1 mm thick MS sheet, over all size drawer as per drawings duly painted with a coat of pink primer all as shown in drg and as directed and specified. |
| 26 | S&F of shutters to the box fabricated out of 1mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.. |
| 27 | S&F of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified. |
| 28 | S&F of side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified. |
| 29 | S&F Drawer lock with duplicate keys make apporved by GE |
| 30 | S&F of rubber shoe for leg as per required size |
| 31 | After the removing of old paint, rust (by emery paper) and prepaired whole surface of table office officers steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Burger Asian) all as per directed by Engr-in-Charge. |
| 32 | TABLE OFFICE CLK STEEL {FD-84 (M)/ FD-1004}: - M&L for carrying out repair and replacement of the following parts of table office clerk steel as per drg. |
| 33 | Supply & fix top of the table made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge. |
| 34 | Supply & fix drawers of table made out of 1 mm thick MS sheet over all size of drawer 350x430 mm & 410 mm deep duly painted with a coat of pink primer all as shown in drg and as directed and specified.. |
| 35 | S&F of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of zink primer all as shown in drg and as directed and specified.. |
| 36 | Supply and fix side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of zink primer all as shown in drg and as directed and specified.. |
| 37 | S&F Drawer lock with duplicate keys make apporved by GE |
| 38 | S&F of leg made out of 25 mm square conduict 16 gauge include cutting welding to requied length of adequeate size of all as shown on drawing and as as specified and directed by Engr-in Charge. |
| 39 | S&F of rubber shoe for leg as per required size |
| 40 | After the removing of old paint, rust (by emery paper) and prepaired whole surface of table office clerk steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Burger Asian) all as per directed by Engr-in-Charge. |
| 41 | CHAIR TUBLAR STEEL W/O ARM {FD-75 (M)}: - M&L for carrying out repair and replacement of the following parts of chair tublar steel without arms as shown in drg as directed by Engr-in-Charge. |
| 42 | S&F Seat frameafter canning as per 'Godrej' pattern |
| 43 | S&F Back frame after canning as per 'Godrej' pattern |
| 44 | S&F MS Machine screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers as required |
| 45 | Cutting the existing damaged portion of conduit pipe and welding by providing 20mm dia conduit pipe 18 gauge (approx 250mm long) bend to standard size complete all as directed by Engineer-in-Charge |
| 46 | S&F MS flat iron 25x3mm, 50mm long for fixing back frame/seat frame by gas welding to steel frame of chair for support all as directed by Engr-in-Charge |
| 47 | After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair tubuler steel w/o arm for painting, then applying one coat of red oxide primer, then after apply one coat of synthetic enamel paint olive green (Make: Berger/Asian) all as per directed by Engr-in-Charge. |
| 48 | S&F of PVC rubber shoes for leg and cap for top as per existing size and shape. |
| 49 | CHAIR TUBLAR STEEL WITH ARM {FD-75 (M)}: - M&L for carrying out repair and replacement of the following parts of chair tublar steel with arms as per drg. |
| 50 | S&F Arm wooden made out of 1st class hardwood (Teak) painted by black synthetic enamel paint glosy finished as per drg. |
| 51 | S&F Seat frame including canning as per 'Godrej' pattern |
| 52 | S&F Back frame including canning as per 'Godrej' pattern |
| 53 | S&F MS Machine screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers as required |
| 54 | Cutting the existing damaged portion of conduit pipe and welding by providing 20mm dia conduit pipe 18 gauge (approx 250mm long) bend to standard size complete all as directed by Engineer-in-Charge |
| 55 | S&F MS flat iron 25x3mm, 50mm long for fixing back frame/seat frame by gas welding to steel frame of chair for support all as directed by Engr-in-Charge |
| 56 | After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair tubuler steel with arm for painting, then applying one coat of red oxide primer, then after apply one coat of synthetic enamel paint olive green (Make: Berger/Asian) all as per directed by Engr-in-Charge. |
| 57 | S&F of PVC rubber shoes for leg and cap for top as per existing size and shape. |
| 58 | TABLE DINING OR'S STEEL {FD-165 (M)}: - M&L for carrying out repair and replacement of the following parts of table dinning OR's steel all as shown on drg and as directed by Engr-in-Charge.. |
| 59 | Removing the existing unserviceable damage table top including aluminum sheet from the table and Supply & fix new table top 1900x685mm size of 18mm thick plain particle board (Phenyl bonded) exterior grade with 22 gauge aluminium sheet all as shown on drg and directed by Engr-in-Charge. |
| 60 | S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge. |
| 61 | All as per item No. 08.02 here-in-before but for stiffner |
| 62 | S&F of rubber shoe for leg |
| 63 | Preparing of steel surface of table and applying one coat of synthetic enamel paint of required colour all as specified and directed. |
| 64 | RACK SIDE STEEL WITH TRAY 3 SPACES {FD-97(M)/FD-1039} : - M&L for carrying out repair and replacement of the following parts ofRack side sttel with tray 3 spaces for re-assembling with new parts/components as per required size and shape all as shown in drg. |
| 65 | S&F of shelves made out of 1.25 mm thick PBI Sheet Size 685 x 255mm |
| 66 | Points welding as required |
| 67 | Applying two coats of 1st quality synthetic enamel pant colour OG/Grey ( Make Asian/Berger/Shalimae) as approved oer a coat of zinc primer yellow extenal and internal by spray machine after preparation of surfaces. |
| 68 | RACK SHOE STEEL {FD/E6/MAP/02R} : - M&L for carrying out repair and replacement of the following parts of rack shoe steel as per drg. |
| 69 | Repair to the rack shoe steel and welded wherever required. remove dents & rust of whole rack and making it servicable and applying a coat of on whole surface synthetic enamel black paint (Make: Asian Berger) complete all as per drg where ever required all as diected and specified. |
| 70 | S&F Jali shelves made with 3mm dia ms rod welded to frame all as per detail shown in drg and all as directed by Engr-in-charge. |
| 71 | S&F Hard rubber shoe best qulaity as per existing size and shape |
| 72 | STOOL STEEL ( 305X 305X 760MM) {FD-81(M)} |
| 73 | S&F Leg ( including welding ) |
| 74 | S&F Top of stool of size 305x305x600mm made out of 1.25mm thick PB sheet to frame |
| 75 | Point wdlding as required |
| 76 | Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame. |
| 77 | CHAIR VERANDAH (FD-256) : - M&L for carrying out repair and replacement of the following parts of chair verandah as per drg. |
| 78 | S&F leg made out of 20 mm dia conduit pipe 16 gauge of size 1250 mm long |
| 79 | S&F stiffner made out of Mild Steel Rod 10 mm dia, 460 mm long |
| 80 | S&F hard rubber shoe best quality as per existing size and shape |
| 81 | After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair varandahview to position shall be painted with two coats of white enamel paint over a coat of primer (Make: Berger/Asian /salimar) all as shown in drg./ directed by Engr-in-Charge. |
| 82 | Removing existing old worn out nylon tape/cane from chair verandah and reweaving the chair with new 04 mm thick oval shape of white colour best quality cane (Make: Shah Premier all as per drg and as directed by the Engr-in-Charge |
| 83 | TEAPOY VERANDAH (FD-255) : - M&L for carrying out repair and replacement of the following parts of teapoy verandah as per drg. |
| 84 | Supply & fix MS conduit 12 mm bore as in short runner of Teapoy verandah by welding duly painted with a coat of pink primer after dismantling old broken/ unserviceable runner all as shown on drg and as specified and directed |
| 85 | All as per ser item No. 13.01 here in before but long runner. |
| 86 | Supply & fix top of the teapoy verandha made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet white at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer of teapoy verandah after dismantling old damaged/unserviceable top all as shown on drg all as specified and directed by Engr-in-Charge. |
| 87 | S&F of rubber shoe for leg as per required size |
| 88 | After the removing of old paint, rust (by emery paper) and prepaired whole surface of teapoy verandah for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint white (Make: Burger Asian) all as per directed by Engr-in-Charge. |
| 89 | CHAIR CUM WRITING DESK (FD/CCE/R&D/BLS/01) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair cum writing desk as per drg & as per the direction of Engr-in-charge. |
| 90 | S&F seat frame including canning (shape as per drg) and Godrej pattern made out of 2nd class hardwood 55X20 mm section duly fitted with screw bolt. |
| 91 | S&F all as per item No 14.01 mentioned here-in-above but back fame with canning made out of 2nd class HW 55X20mm section duly fitted with screw bolt |
| 92 | S&F leg made out of 19mm square condiit 16G including cutting welding to required length. |
| 93 | S&F stiffner made out of 19mm square conduit 16G including cutting welding to required length. |
| 94 | S&F tablet of size 300X230X20 mm made out of 2nd class HW. |
| 95 | S&F Piano hinges |
| 96 | S&F Arm |
| 97 | Point welding as required |
| 98 | Applying one coats of 1st quality synthetic enamel paint (Berger/Asian/Shalimar) colour OG/Black by spray machine after preparation of surface complete on existing frame work of computer chair complete all as directed by Engr-in-charge. |
| 99 | ALMIRAH LARGE STEEL WITH SHELVES {FD-67 (M)/FD-1031}: - M&L for carrying out repair and replacement of the following parts of almirah large steel with shelves as per drg. |
| 100 | S&F base in \\"U\\" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing. |
| 101 | S&F MS rod for locking device 10 mm dia as per required shape & size |
| 102 | S&F shelves made out of 1.00 mm thick MS sheet over all size 485 x 920 mm. |
| 103 | S&F in replacement CP MS handle as per existing pattern and design of Almirah all as directed and specified by GE/Engr-in-Charge. |
| 104 | S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified. |
| 105 | S&F MS cleat for shelves made out of 1.00 mm thick MS sheet |
| 106 | S&F key hole cover outer best quality approved by GE |
| 107 | S&F key hole cover inner side made out of 1.00 mm thick MS sheet |
| 108 | After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah large steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg. |
| 109 | ALMIRAH STEEL LARGE 1/2H & 1/2S (FD-1033) : M&L for carrying out repair and replacement of the following parts of almirah steel large 1/2H &1/2S as per drg. |
| 110 | S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified. |
| 111 | S&F in replacement CP MS handle as per existing pattern and design of Almirah all as directed and specified by GE/Engr-in-Charge. |
| 112 | S&S MS cleat for shelves made out 1.00 thick MS sheet fixed screw |
| 113 | S&F Key hole cover outer best quality approved by GE |
| 114 | S&F Key hole cover inner made out of 1.00 mm thick MS Sheet |
| 115 | S&F shelves made out of 1.25 thick MS sheet size 920x 485mm |
| 116 | S&F base in \\"U\\" shape made out of 1.25 mm thick MS sheet welded with electric welding machine to match with existing. |
| 117 | S&F Hanging rod of 20mm dia CP conduit pipe with socket as per requid length |
| 118 | After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah large steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg. |
| 119 | ALMIRAH MED STEEL WITH SHELVES (FD-243/FD-1032): - M&L for carrying out repair and replacement of the following parts of almirah small/med steel with shelves as per drg. |
| 120 | S&F legs base in \\"U\\" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing. |
| 121 | S&F MS rod for locking device 10 mm dia as per required shape & size |
| 122 | S&F shelves made out of 1.00 mm thick MS sheet over all size 440 x 765 mm. |
| 123 | S&F in replacement CP handle as per existing pattern and design to any type of Almirah all as directed and specified by GE/Engr-in-Charge. |
| 124 | S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified. |
| 125 | S&F MS cleat for shelves made out of 1.00 mm thick MS sheet |
| 126 | S&F key hole cover outer best quality approved by GE |
| 127 | S&F key hole cover innermade out of 1.00 mm thick MS sheet |
| 128 | After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah med steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg. |
| 129 | TABLE EXECUTIVE WITH RETURN UNIT STEEL (TP): M&L for carrying out repair and replacement of the following parts of table executive with return unit as per drg. |
| 130 | Supply & fix of top size 1825X900 mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge. |
| 131 | S&F Leg MS square tube 25mm |
| 132 | S&F Drawer made out of prelaminated particle baord size as per drg. |
| 133 | S&F Drawer lock 6 lever with duplicate key as approvede byGE ( Make : Godrej/harision/Link) |
| 134 | S&F Stiffiner MS square tube 25mm |
| 135 | Return unit top size 900 x 450mm made out of 18mm thick prelamianted particles board with sunmica beading all roaund. |
| 136 | Door to cup baord made out of 18mm thick prelaminated particle board and size & shaape as per existing. |
| 137 | S&F Hinges for return unit |
| 138 | Point welding as required |
| 139 | Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame. |
| 140 | S&F hard rubber shoe best quality as per existing size and shape |
| 141 | CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) : M&L for carrying out repair and replacement of the following parts of chair school with hand board. Removing carefully the existing unserviceable/damaged parts of chair school with hand board and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge |
| 142 | Openable (Hinged on RHS) table top to slide on rod for adjustment |
| 143 | 18/19mm thick plywood BWR Gde with 1mm laminated seat board on top openable withteak wood edging of size 300x585mm |
| 144 | One piece PVC back and seat Make : Blowplast/Neelkamal/Supreme |
| 145 | Basket made out of 5mm dia mild steel wire welded to frame of chair |
| 146 | S&F hard rubber shoe best quality as per existing size and shape |
| 147 | M&L Applying one coats of 1st quality synthetic enamel paint (Black of chair school with hand board) as approved over a coat of pink primer (yellow) by spray machine after preparation of surface complete. |
| 148 | DESK SCHOOL CHILD (GE/CDP/ F/28/99) : M&L for carrying out repair and replacement of the following parts of Destk school child . Removing carefully the existing unserviceable/damaged parts of Desk school child and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge |
| 149 | Top plank with 19mm thick 2nd class HW fixed with 1.5mm sunmica at top of size 450X460 |
| 150 | Back plank with 19mm thick 2nd class HW of size 550X230 mm |
| 151 | Leg with 16G MS 25mm square tube ,440mm long. |
| 152 | S&F of stiffner with 16G MS 25 mm squre tube 250mm long |
| 153 | S&F hard rubber shoe best quality as per existing size and shape |
| 154 | Point welding as required. |
| 155 | Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow by spray machine after prepairtaion surface to steel frame. |
| 156 | Polishing to plank,seat & back with superior quality french polish to get glossy finish as directed by Engr-in-Charge. |
| 157 | JR. EXECUTIVE TABLE (FD/CCE/R&D/BLS/66): M&L for carrying out repair and replacement of the following parts of Jr Executive Table . Removing carefully the existing unserviceable/damaged parts of Jr Executive Table and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge |
| 158 | Supply & fix of top size 1675X915 mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge. |
| 159 | S&F leg MS square tube 25mm of 16gauge |
| 160 | S&F Drawer made out of 1.25mm thick PBI sheet and size as per dgr. |
| 161 | S&F Drawer lock 6 lever with duplicate key as approvede byGe ( Make : Godrej/harision/Link) as approved by GE/Engr-in-Charge. |
| 162 | S&F Stiffiner MS square tube 25mm |
| 163 | S&F Door of cup board made out of 1.25mm thick PBI sheet and size as per Drg. |
| 164 | S&F Rubber shoes for leg of the table asper required shape and size |
| 165 | Point welding as required |
| 166 | Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame. |
| 167 | BED HARD TOP {FD/E6/MAP/ 08 (R)}: M&L removing the existing unserviceable/damaged parts of Bed hard top and S&F of new parts/components of required size and shape as per drg to match with the existing including re assembling complete as all directed by Engr-in-Charge. |
| 168 | S&F of new 12mm thick commercial plywood 1980x 900mm BWR grade ISI marked (Make: national/kitply/green ply) alongwith MS round headed nut & bolts with whasher as per required size and all as directed by Engr-in-Charge. |
| 169 | Point welding as required duly polished |
| 170 | S&F of rubber shoes to MS square pipe bottom of legs |
| 171 | After removing of old paint,rust (by emery paper) and prepair whole surface of bed hard top for painting,then applying one coat of zink primer yellow then after apply one coat of 1st class synthetic enamel paint black in colour make (Burger/Asian/Indigo) all as directed by Engr-in-Charge. |
| 172 | CHARPOY HARD TOP (FD/E6/MAP-II/01): M&L removing the existing unserviceable/damaged parts of charpoy hard top and S&F of new parts/components of required size and shape as per drg to match with the existing including re assembling complete as all directed by Engr-in-Charge. |
| 173 | S&F of new 12mm thick commercial plywood 1980x 900mm BWR grade ISI marked (Make: national/kitply/green ply) alongwith MS round headed MS round headed screw as per required size and all as directed by Engr-in-Charge. |
| 174 | Point welding as required duly polished |
| 175 | S&F of rubber shoe ms square pipe bottom of legs |
| 176 | After removing of old paint,rust (by emery paper) and prepair whole surface of bed hard top for painting,then applying one coat of zink primer yellow then after apply one coat of 1st class synthetic enamel paint black in colour make (Burger/Asian/Indigo) all as directed by Engr-in-Charge. |
| 177 | TABLE 900X600X760 MM W/DRAWER & W/O DRAWER (FD-1007 & FD-1008) M&L removing the existing unserviceable/damaged parts of table 900x600x760 mm and S&F of new parts/components of required size and shape as per drg to match with the existing including re assembling complete as all directed by Engr-in-Charge. |
| 178 | S&F of table top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge. |
| 179 | S&F Drawer lock with duplicate keys make apporved by GE/Engr-in-Charge. |
| 180 | S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge. |
| 181 | S&F of rubber shoe for leg |
| 182 | Preparing of steel surface of table and applying one coat of synthetic enamel paint of required colour all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
